Search results

Thermomechanical behavior of intermediate-size beam-to-wall assemblies including Glulam-beams connected to cross-laminated timber (CLT) walls with T-shape steel doweled connections was investigated at ambient temperature (AT) and after and during non-standard fire exposure.

Three AT tests were conducted to evaluate the load-carrying capacity and failure modes of the assembly at room temperature. Two post-fire performance (PFP) tests were performed to study the impact of 30-min (PFP30) and 60-min (PFP60) partial exposure to a non-standard fire on the residual strength of the assemblies. The assemblies were exposed to fire in a custom-designed frame, then cooled and loaded to failure. A fire performance (FP) test was conducted to study the fire resistance (FR) during non-standard fire exposure by simultaneously applying fire and a mechanical load equal to 65% of the AT load carrying capacity.

At AT, embedment failure of the dowels followed by splitting failure at the Glulam-beam and tensile failure of the epoxy between the layers of CLT-walls were the dominant failure modes. In both PFP tests, the plastic bending of the dowels was the only observed failure mode. The residual strength of the assembly was reduced 14% after 30 min and 37% after 60 min of fire exposure. During the FP test, embedment failure of timber in contact with the dowels was the only major failure mode, with the maximum rate of displacement at 51 min into the fire exposure.

This is the first time that the thermomechanical performance of such an assembly with a full-contact connection is presented.

3-ply cross-laminated timber (CLT) is used to investigate the thermo-mechanical performance of intermediate-size assemblies comprised of T-shaped welded slotted-in steel doweled connections and CLT beams at ambient temperature (AT), after and during non-standard fire exposure.

The first set of experiments was performed as a benchmark to find the load-carrying capacity of the assembly and investigate the failure modes at AT. The post-fire performance (PFP) test was performed to investigate the residual strength of the assembly after 30-min exposure to a non-standard fire. The fire-performance (FP) test was conducted to investigate the thermo-mechanical behavior of the loaded assembly during non-standard fire exposure. In this case, the assembly was loaded to 67% of AT load-carrying capacity and partially exposed to a non-standard fire for 75 min.

Embedment failure and plastic deformation of the dowels in the beam were the dominant failure modes at AT. The load-carrying capacity of the assembly was reduced to 45% of the ambient capacity after 30 min of fire exposure. Plastic bending of the dowels was the principal failure mode, with row shear in the mid-layer of the CLT beam and tear-out failure of the header sides also observed. During the FP test, ductile embedment failure of the timber in contact with the dowels was the major failure mode at elevated temperature.

This paper presents for the first time the thermo-mechanical performance of CLT beam-to-girder connections at three different thermal conditions. For this purpose, the outside layers of the CLT beams were aligned horizontally.

1. Load-carrying capacity and failure modes of CLT beam-to-girder assembly with T-shaped steel doweled connections at ambient temperature presented.

2. Residual strength and failure modes of the assembly after 30-min partially exposure to the non-standard fire provided throughout the post-fire performance test.

3. Fire resistance of the assembly partially exposed to the non-standard fire highlighted.

Load-carrying capacity and failure modes of CLT beam-to-girder assembly with T-shaped steel doweled connections at ambient temperature presented.

Residual strength and failure modes of the assembly after 30-min partially exposure to the non-standard fire provided throughout the post-fire performance test.

Fire resistance of the assembly partially exposed to the non-standard fire highlighted.

Brazil uses the dollar as a vehicle currency to invoice its exports. This fact produces a tendency toward equalizing the prices of products in dollars in the international market and reducing the ability of firms to practice pricing-to-market (PTM). This study aims to evaluate the hypothesis by estimating error correction models in panel data, obtaining estimates of PTM for 25 manufacturing products exported by Brazil between 2010 and 2020.

This study uses the correlated common effect estimator proposed by Pesaran (2006) and Chudik and Pesaran (2015b) to estimate the PTM coefficients.

Results of this study indicate that exporters practice local-currency pricing stability for dollar prices. This study obtains that Brazilian exporters tend to stabilize their dollar price for exports, reducing heterogeneity between destination markets. The results are in agreement with the hypothesis of the prevalence of the coalescing effect of Goldberg and Tille (2008) and lower sensitivity of the markup adjustment to the specific market, as pointed out by Corsetti et al. (2018). The pricing of Brazilian exports in dollars reflects a profit maximization strategy that considers an international price system based on global demand for products.

In addition to analyzing the dollar role in the pricing of Brazilian exports through the triangular decomposition, this study also shows the importance of examining the cross-section dependence of errors, considering the heterogeneous cointegration in export pricing models and producing PTM estimates for short-term and long-term.

The purpose of this paper is to examine the purchase behavior of consumers towards green products by adapting and extending the theory of planned behavior with the inclusion of three pertinent environmental factors posited to reflect environmental consciousness in the form of environmental concern, environmental knowledge and environmental values.

The data was collected from 410 consumers at shopping malls with retail stores selling green and non-green products in a developing country using cluster sampling and analyzed using covariance-based structural equation modeling.

The findings of this study indicate that environmental factors reflecting environmental consciousness positively influence consumers’ attitude towards purchasing green products, wherein consumers’ environmental values have a stronger influence than their environmental concern and environmental knowledge. The findings also reveal that subjective norm, attitude and perceived behavioral control toward purchasing green products positively shape green purchase intention. The same positive effect is also witnessed between green purchase intention and behavior. However, perceived behavioral control towards purchasing green products had no significant influence on green purchase behavior.

This study suggests that green marketers should promote environmental consciousness among consumers to influence and shape their planned behavior towards green purchases. This could be done by prioritizing efforts and investments in inculcating environmental values, followed by enhancing environmental knowledge and finally inducing environmental concern among consumers. Green marketers can also leverage subjective norm and perceptions of behavioral control toward purchasing green products to reinforce green purchase intention, which, in turn, strengthens green purchase behavior. This green marketing strategy should also be useful to address the intention–behavior gap as seen through the null effect of perceived behavioral control on purchase behavior toward green products when this strategy is present.

This study contributes to theoretical generalizability by reaffirming the continued relevance of the theory of planned behavior in settings concerning the environment (e.g. green purchases), and theoretical extension by augmenting environmental concern, environmental knowledge and environmental values with the theory of planned behavior, resulting in an environmentally conscious theory of planned behavior. The latter is significant and noteworthy, as this study broadens the conceptualization and operationalization of environmental consciousness from a unidimensional to a multidimensional construct.

Because of the significant differences in the features and requirements of specific products and the capabilities of various additive manufacturing (AM) solutions, selecting the most appropriate AM technology can be challenging. This study aims to propose a method to solve the complex process selection in 3D printing applications, especially by creating a new multicriteria decision-making tool that takes the direct certainty of each comparison to reflect the decision-maker’s desire effectively.

The methodology proposed includes five steps: defining the AM technology selection decision criteria and constraints, extracting available AM parameters from the database, evaluating the selected AM technology parameters based on the proposed decision-making methodology, improving the accuracy of the decision by adopting newly proposed weighting scheme and selecting optimal AM technologies by integrating information gathered from the whole decision-making process.

To demonstrate the feasibility and reliability of the proposed methodology, this case study describes a detailed industrial application in rapid investment casting that applies the weightings to a tailored AM technologies and materials database to determine the most suitable AM process. The results showed that the proposed methodology could solve complicated AM process selection problems at both the design and manufacturing stages.

This research proposes a unique multicriteria decision-making solution, which employs an exclusive weightings calculation algorithm that converts the decision-maker's subjective priority of the involved criteria into comparable values. The proposed framework can reduce decision-maker's comparison duty and potentially reduce errors in the pairwise comparisons used in other decision-making methodologies.

This study aims to research the development trend, research status, research results and existing problems of the steel–concrete composite joint of railway long-span hybrid girder cable-stayed bridge.

Based on the investigation and analysis of the development history, structure form, structural parameters, stress characteristics, shear connector stress state, force transmission mechanism, and fatigue performance, aiming at the steel–concrete composite joint of railway long-span hybrid girder cable-stayed bridge, the development trend, research status, research results and existing problems are expounded.

The shear-compression composite joint has become the main form in practice, featuring shortened length and simplified structure. The length of composite joints between 1.5 and 3.0 m has no significant effect on the stress and force transmission laws of the main girder. The reasonable thickness of the bearing plate is 40–70 mm. The calculation theory and simplified calculation formula of the overall bearing capacity, the nonuniformity and distribution laws of the shear connector, the force transferring ratio of steel and concrete components, the fatigue failure mechanism and structural parameters effects are the focus of the research study.

This study puts forward some suggestions and prospects for the structural design and theoretical research of the steel–concrete composite joint of railway long-span hybrid girder cable-stayed bridge.

Partial least squares (PLS) path modeling is a variance-based structural equation modeling (SEM) technique that is widely applied in business and social sciences. Its ability to model composites and factors makes it a formidable statistical tool for new technology research. Recent reviews, discussions, and developments have led to substantial changes in the understanding and use of PLS. The paper aims to discuss these issues.

This paper aggregates new insights and offers a fresh look at PLS path modeling. It presents new developments, such as consistent PLS, confirmatory composite analysis, and the heterotrait-monotrait ratio of correlations.

PLS path modeling is the method of choice if a SEM contains both factors and composites. Novel tests of exact fit make a confirmatory use of PLS path modeling possible.

This paper provides updated guidelines of how to use PLS and how to report and interpret its results.

Although knowledge sharing in online communities has been studied for many years, little is known about the determinants for individuals' knowledge sharing in online health communities (OHCs) surrounding smoking cessation. Examining the determinants of knowledge sharing in such OHCs from the social capital perspective may prove particularly enlightening.

A questionnaire-based online user survey of two smoking cessation OHCs, one based in Finland and one based in China, was performed. Performing data analysis with partial least squares (SmartPLS 3.0), the authors developed a model conceptualizing the structural, cognitive and relational dimensions of social capital as drivers for knowledge sharing in smoking cessation OHCs, with users' stage in giving up smoking as a moderator.

The results show that structural capital (social ties) and relational capital (reciprocity) are important motivators behind knowledge sharing in smoking cessation OHCs, and the authors found a moderating effect of the stage in quitting on the antecedents' relationship with knowledge sharing in these OHCs.

The study enriches understanding of knowledge sharing in smoking cessation OHCs, contributing to theory and identifying practical implications for such groups' administration.

The potential growth in cryptocurrencies has raised serious ethical and religious issues leading to a new investment rethinking. This paper aims to identify the influence of religiosity on cryptocurrency acceptance through an extended technology acceptance model (TAM) model.

In the first phase, this research develops a conceptual model that extends the theory of the TAM by integrating the religiosity component. In the second phase, the proposed model is tested using search volume queries in daily frequencies from 01/01/2018 to 31/12/2022 and structural equation modeling (SEM).

The empirical results demonstrate a significant positive effect of religiosity on the intention to use cryptocurrency, the users' perceived usefulness (PU) and ease of use (PEOU). Besides, the authors note that PEOU positively influences the intention. Furthermore, religiosity indirectly affects the intention through the PEOU and positively impacts the intention through the PU. In the same way, PEOU has a considerable indirect effect on the intention through PU.

This study has practical and theoretical contributions by providing insights into the cryptocurrency acceptance factors. In other words, it contributes to the literature by extending TAM models. Practically, it helps managers determine factors affecting the intention to use cryptocurrencies. Therefore, they can adjust their industry according to the suitable characteristics for creating successful projects.

Identifying the effect of religiosity on cryptocurrency users' choices and decisions has a social added value as it provides an understanding of the evolution of psychological variants.

The findings emphasize the importance of integrating big data to analyze users' attitudes. Besides, most studies on cryptocurrency acceptance are investigated based on one kind of religion, such as Christianity or Islam. Nevertheless, this paper integrates the effect of five types of faith on the users' intentions.

While aiming to create methods for fibre recycling, the question of colours in waste textiles is also in focus; whether the colour should be kept or should be removed while recycling textile fibre. More knowledge is needed for colour management in a circular economy approach.

The research included the use of different dye types in a cotton dyeing process, the process for decolourizing and the results. Two reactive dyes, two direct dyes and one vat dye were used in the study. Four chemical treatment sequences were used to evaluate colour removal from the dyed cotton fabrics, namely, HCE-A, HCE-P-A, HCE-Z-P-A and HCE-Y-A.

The objective was to evaluate how different chemical refining sequences remove colour from direct, reactive and vat dyed cotton fabrics, and how they influence the specific cellulose properties. Dyeing methods and the used refining sequences influence the degree of colour removal. The highest achieved final brightness of refined cotton materials were between 71 and 91 per cent ISO brightness, depending on the dyeing method used.

Only cotton fibre and three different colour types were tested.

With cotton waste, it appears to be easier to remove the colour than to retain it, especially if the textile contains polyester residues, which are desired to be removed in the textile refining stage.

Colour management in the CE context is an important new track to study in the context of the increasing amount of textile waste used as a raw material.