Search results

This paper presents Quick Changeover Design (QCD), which is a structured methodological approach for Original Equipment Manufacturers to drive and support the design of machines in terms of rapid changeover capability.

To improve the performance in terms of set up time, QCD addresses machine design from a single-minute digit exchange of die (SMED). Although conceived to aid the design of completely new machines, QCD can be adapted to support for simple design upgrades on pre-existing machines. The QCD is structured in three consecutive steps, each supported by specific tools and analysis forms to facilitate and better structure the designers' activities.

QCD helps equipment manufacturers to understand the current and future needs of the manufacturers' customers to: (1) anticipate the requirements for new and different set-up process; (2) prioritize the possible technical solutions; (3) build machines and equipment that are easy and fast to set-up under variable contexts. When applied to a production system consisting of machines subject to frequent or time-consuming set-up processes, QCD enhances both responsiveness to external market demands and internal control of factory operations.

The QCD approach is a support system for the development of completely new machines and is also particularly effective in upgrading existing ones. QCD's practical application is demonstrated using a case study concerning a vertical spindle machine.

This study aims to investigate the effect of vibration on ceramic tools under dry cutting conditions and find the optimum cutting condition for the hardened steel machining process in a computer numerical control (CNC) lathe machine.

In this research, an integrated fuzzy TOPSIS-based Taguchi L9 optimization model has been applied for the multi-objective optimization (MOO) of the hard-turning responses. Additionally, the effect of vibration on the ceramic tool wear was investigated using Analysis of Variance (ANOVA) and Fast Fourier Transform (FFT).

The optimum cutting conditions for the multi-objective responses were obtained at 98 m/min cutting speed, 0.1 mm/rev feed rate and 0.2 mm depth of cut. According to the ANOVA of the input cutting parameters with respect to response variables, feed rate has the most significant impact (53.79%) on the control of response variables. From the vibration analysis, the feed rate, with a contribution of 34.74%, was shown to be the most significant process parameter influencing excessive vibration and consequent tool wear.

The MOO of response parameters at the optimum cutting parameter settings can significantly improve productivity in the dry turning of hardened steel and control over the input process parameters during machining.

Most studies on optimizing responses in dry hard-turning performed in CNC lathe machines are based on single-objective optimization. Additionally, the effect of vibration on the ceramic tool during MOO of hard-turning has not been studied yet.

The purpose of this study is to develop a framework of strategies to achieving customer order flexibility in and related to the order-to-delivery (OTD) process. The purpose is also to investigate how companies prioritize various strategies to achieve customer order flexibility.

Based on a literature review, pre-tests and conceptual reasoning, a conceptual framework of strategies related to the order-to-delivery process was developed. The strategies were linked to the order quantity and delivery lead-time flexibility dimensions. This structure resulted in six groups covering enabling as well as remedial strategies. An empirical interview study of ten customer–supplier relationships was conducted.

The interviews identified additional strategies, thereby expanding the framework. The enabling strategies with the highest median values were “have continuous contact with the customer's purchaser” and “use safety stock of raw materials/semi-finished products”. The remedial strategy with the highest median was “re-plan/re-prioritize the order backlog”. In the delivery sub-process, it was more common to apply remedial strategies for delivery lead-time than for order quantities.

The developed framework is a contribution to the literature on operational flexibility in and related to the OTD process. It complements existing knowledge by taking a supplier perspective.

Suppliers can use the framework as a tool to understand and systematically achieve better customer order flexibility in and related to the OTD process. Customers can use the framework as a checklist for supplier evaluation and supplier development.

Few identified studies include empirical data on customer order flexibility.

Lean management is a suitable methodology for companies that want to improve their productive performance and competitiveness. This study aims to research levels of implementation and internalisation of Lean production tools in Spanish manufacturing companies, and explores differences in behaviour between SMEs and large companies based on data gathered over three time periods. The correlation between Lean adoption and company performance is also analysed.

Company survey data for the years 2012, 2015 and 2018 collected from 354 respondents were used to conduct a longitudinal study on the level of lean tool adoption and internalisation in manufacturing companies.

Over the years, the use of Lean tools has increased, whereas levels of internalisation have remained stable. Lean tool use in SMEs and large companies show significant differences in 2012 and 2015, but this is no longer the case 2018. Results also show that higher Lean tool use helps increase return on sales (ROS), and higher levels of internalisation of tools helps reduce the number of products rejected.

To date, there are no known studies on the use and internalisation of Lean tools or their correlations with business performance indicators in Spanish manufacturing companies.

Improving productivity and efficiency has always been crucial for industrial companies to remain competitive. In recent years, the topic of environmental impact has become increasingly important. Published research indicates that environmental and economic goals can enforce or rival each other. However, few papers have been published that address the interaction and integration of these two goals.

In this paper, we identify both, synergies and trade-offs based on a systematic review incorporating 66 publications issued between 1992 and 2021. We analyze, quantify and cluster examples of conjunctions of ecological and economic measures and thereby develop a framework for the combined improvement of performance and environmental compatibility.

Our findings indicate an increased significance of a combined consideration of these two dimensions of sustainability. We found that cases where enforcing synergies between economic and ecological effects were identified are by far more frequent than reports on trade-offs. For the individual categories, cost savings are uniformly considered as the most important economic aspect while, energy savings appear to be marginally more relevant than waste reduction in terms of environmental aspects.

No previous literature review provides a comparable graphical treatment of synergies and trade-offs between cost savings and ecological effects. For the first time, identified measures were classified in a 3 × 3 table considering type and principle.

We studied the relationship between job engagement and systematic problem solving (SPS) among shop-floor employees and how lean production (LP) and Internet of Things (IoT) systems moderate this relationship.

We collected data from a sample of 440 shop floor workers in 101 manufacturing work units across 33 plants. Because our data is nested, we employed a series of multilevel regression models to test the hypotheses. The application of IoT systems within work units was evaluated by our research team through direct observations from on-site visits.

Our findings indicate a positive association between job engagement and SPS. Additionally, we found that the adoption of lean bundles positively moderates this relationship, while, surprisingly, the adoption of IoT systems negatively moderates this relationship. Interestingly, we found that, when the adoption of IoT systems is complemented by a lean management system, workers tend to experience a higher effect on the SPS of their engagement.

One limitation of this research is the reliance on the self-reported data collected from both workers (job engagement, SPS and control variables) and supervisors (lean bundles). Furthermore, our study was conducted in a specific country, Italy, which might have limitations on the generalizability of the results since cross-cultural differences in job engagement and SPS have been documented.

Our findings highlight that employees’ strong engagement in SPS behaviors is shaped by the managerial and technological systems implemented on the shop floor. Specifically, we point out that implementing IoT systems without the appropriate managerial practices can pose challenges to fostering employee engagement and SPS.

This paper provides new insights on how lean and new technologies contribute to the development of learning-to-learn capabilities at the individual level by empirically analyzing the moderating effects of IoT systems and LP on the relationship between job engagement and SPS.

Why are some lean workfloor teams able to improve their already high performance, over time, and others not? By studying teams' and leaders' behaviour-value patterns, this abductive field study uncovers a dynamic capability at the team level.

Various methods were employed over three consecutive years to thoroughly examine five initially high-performing lean workfloor teams, including their leaders. These methods encompassed micro-behavioural coding of 59 h of film footage, surveys, individual and group interviews, participant observation and archival data, involving objective and perceptual team-performance indicators. Two of the five teams continued to improve and perform highly.

Continuously improving high lean team performance is found to be associated with (1) team behaviours such as frequent performance monitoring, information sharing, peer support and process improvement; (2) team leaders who balance, over time, task- and relations-oriented behaviours; (3) higher-level leaders who keep offering the team face-to-face support, strategic clarity and tangible resources; (4) these three actors' endorsement of self-transcendence and openness-to-change work values and alignment, over time, with their behaviours; and (5) coactive vicarious learning-by-doing as a “stable collective activity pattern” among team, team leader, and higher-level leadership.

Since lean has been undertheorised, the authors invoked insights from organisational behaviour and management theories, in combination with various fine- and coarse-grained data, over time. The authors uncovered actors' behaviour-value patterns and a collective learning-by-doing pattern that may explain continuous lean team performance improvement. Four theory-enriching propositions were developed and visualised in a refined model which may already benefit lean practitioners.

In light of the new way of interpreting work spearheaded by Generation Z, the objectives of this study are to investigate (1) whether young entrepreneurs identify their start-ups with “zebras” – that is, as a concrete response to the evanescence and fantasy of “unicorns” based on the simultaneous pursuit of profit and social value, mutualism and resilience – and (2) whether they adopt a “teal” organizational configuration – that is, one characterized by evolutionary purpose, self-management and wholeness.

Through a qualitative approach with 41 interviews, this study focuses on start-uppers and companies that are particularly innovative and promising in the Italian context, as selected by Forbes magazine in its ranking of the brightest entrepreneurs, leaders and stars under 30.

The results suggest that young entrepreneurs recognize the importance of the common themes of the zebra movement and therefore identify their startups with zebras. More specifically, Generation Z entrepreneurs: (1) pursue a dual (economic and social) purpose, (2) are mutualistic and (3) build their organizations with resilience and capital efficiency. In addition, the interviews show that the organizational approach taken follows the paradigm of teal organizations, particularly in terms of evolutionary purpose, distributed leadership and decision-making power, and employee wholeness and empowerment.

This is the first study to analyze the evolutionary trends of animal entrepreneurial “species” led by Generation Z entrepreneurs and organized on the basis of the teal paradigm.

The construction industry is reluctant to utilize construction logistics centres (CLC). To understand why, the purpose of the study is to increase the understanding of drivers and challenges of CLC utilization.

Adopting an activity-based cost methodology, nine construction projects' CLC utilization in a Swedish urban development project is analyzed for a time period of three years (2013–2016).

There is a difference between drivers and challenges for implementing and utilizing CLCs, which are often implemented to reduce third-party disturbances. The drivers to utilize a CLC, however, stem from achieving efficient logistics. The authors identify two different utilization strategies; the CLC is used either for just-in-time (JIT) deliveries or as a consolidation point.

The study shows that construction logistics is to some extent repeating some mistakes of its big brother, city logistics. The study hypothesizes that there are differences between CLC implementation and utilization drivers and challenges that are often overlooked, which can explain the lack of CLC utilization.

The study shows that it is crucial for construction projects to develop and formulate a logistics strategy for how to utilize the setup, i.e. deciding whether to use the setup as a consolidation point leading to fewer deliveries and more materials on-site, or as JIT, leading to more deliveries but fewer materials on-site.

CLCs can reduce environmental impact and third-party disturbances. However, to make this come true, acceptance among the users is needed. The study provides understanding of drivers and barriers for CLC implementation and utilization that can increase acceptance among users (i.e. construction projects).

The current study is one of the first studies to analyze CLC utilization.

This technological article deals with a case study to implement an improvement to reduce the machine setup of an industrial process, in addition to the development of people using the A3 methodology for problem-solving.

As a research method, action research was used in a single-case study applied to a motorcycle production company, using the concept of the A3 report for problem-solving as the theoretical basis.

The implementation of the improvement in the process resulted in a reduction of 70.4% of the preparation time (setup) of the machines, thus eliminating the need to add a third production shift.

It has been applied to only one company, so it lacks a feasibility check to be implemented in other companies.

Regarding its practical contribution, the authors first consider that the proposed method can also be applied in small and medium-sized companies (SMEs), since the investment in this problem-solving approach is low without necessarily implementing the lean production system that, it is usually complex, time-consuming and requires the allocation of a substantial amount of resources by companies. The second practical contribution of this work is that the proposed A3 problem-solving methodology can serve as a guide for managers to implement or improve different industrial and service processes.

It has been applied to only one company, so it lacks a feasibility check to be implemented in other companies.