Search results

This paper recommends a method entitled “SMED 4.0” as a development of conventional single minute exchange of die (SMED) to avoid defect occurrence during production and improve sustainability, besides reducing setup time.

The method builds upon an extensive literature review and in-depth explorative research in SMED and zero defect manufacturing (ZDM). SMED 4.0 incorporates an evolutionary stage that employs predict-prevent strategies using Industry 4.0 technologies including the Internet of Things (IoT) and machine learning (ML) algorithms.

It presents the applicability of the proposed approach in (1) identifying the triple bottom line (TBL) criteria, which are affected by defects; (2) predicting the time of defect occurrence if any; (3) preventing defective products by performing online setting on machines during production as needed; (4) maintaining the desired quality of the product during the production and (5) improving TBL sustainability in manufacturing processes.

The extended view of SMED 4.0 in this research, as well as its analytical approach, helps practitioners develop their SMED approaches in a more holistic way. The practical application of SMED 4.0 is illustrated by implementing it in a real-life manufacturing case.

This study aims to analyze lean wastes for the poultry sector in Turkey and link lean tools to this study, focusing on identifying each lean waste that affects poultry production and proposing solutions for preventing these lean wastes in the sector. The proposed solutions aim to improve processes by suggesting different lean tools and their applications for the poultry sector.

The study consists of two different applications. First, the waste relationship matrix (WRM) was created to reveal the relationship between seven lean wastes and their importance order. Then, after determining lean tools for eliminating lean wastes, the optimum weight ranking and consistency ratio of the most suitable lean tools were calculated for these wastes and ranked with the best-worst method (BWM).

Results showed that overproduction is the most critical waste that impacts other wastes, followed by defect waste. Due to the nature of the sector, these wastes not only result in economic loss for the company but also in food waste and loss and issues related to animal welfare. Furthermore, the Kaizen approach and 5S implementation are the methods to eliminate these wastes. Detailed discussion on the link between lean tools and lean wastes is provided for the poultry sector.

This is the first study that theoretically and empirically identifies the potential lean waste affecting the poultry sector and provides lean tools for eliminating these wastes. Sector-specific explanations and discussions are presented in the study to show the applicability of lean approaches in the poultry sector to eliminate waste. In addition, this study is the first to integrate the WRM and BWM.

The purpose of this paper is to understand if and how industrialized house building (IHB) could support productivity developments for housebuilding on project and industry levels. The take is that fragmentation of construction is one explanation for the lack of productivity growth, and that IHB could be an integrating method of overcoming horizontal and vertical fragmentation.

Singe-factor productivity measures are calculated based on data reported by IHB companies and compared to official produced and published research data. The survey covers the years 2013–2020 for IHB companies building multi-storey houses in timber. Generalization is sought through descriptive statistics by contrasting the data samples to the used means to control vertical and horizontal fragmentation formulated as three theoretical propositions.

According to the results, IHB in timber is on average more productive than conventional housebuilding at the company level, project level, in absolute and in growth terms over the eight-year period. On the company level, the labour productivity was on average 10% higher for IHB compared to general construction and positioned between general construction and general manufacturing. On the project level, IHB displayed an average cost productivity growth of 19% for an employed prefabrication degree of about 45%.

Empirical evidence is presented quantifying so far perceived advantages of IHB. By providing analysis of actual cost and project data derived from IHB companies, the article quantifies previous research that IHB is not only about prefabrication. The observed positive productivity growth in relation to the employed prefabrication degree indicates that off-site production is not a sufficient mean for reaching high productivity and productivity growth. Instead, the capabilities to integrate the operative logic of conventional housebuilding together with logic of IHB platform development and use is a probable explanation of the observed positive productivity growth.

COVID-19 disrupted the usual way of working for many people across the globe, making full-time work from home and hybrid models two popular work arrangements. Despite the proliferation and high acceptance of the hybrid model, very little research has focused on the same. This study aims to compare the impact of transitions caused by remote work on work disengagement under two settings: remote work and hybrid model.

The data is collected from three corporate hubs in India: Hyderabad, Gurgaon and Bangalore. This study’s respondents represent two working models: full-time work from home and a hybrid model. Responses were collected using Google forms-based questionnaire, which resulted in the following usable responses: 356 (hybrid) and 398 (work from home).

The findings reveal that the structural model for the hybrid sector explained 11% of the variance in work disengagement, while the same for work from home model accounted for 20% of the variance in work disengagement. The authors also tested for the moderation of individual resilience between work-home and home-to-work conflicts and home-to-work transitions and work-to-home conflict under full-time work-from and hybrid models. Based on 356 respondents from hybrid category and 398 from work from home, the study found that employees experience less work-to-home and home-to-work conflicts in the hybrid model and employees experience more work-to-home and home-to-work conflicts in the full-time work from home model.

The study is also the first to examine the moderating role of individual resilience as a tool to bounce back and handle conflicts. As the full-time work from home model leads to more work-to-home and home-to-work conflicts, individuals have more scope to exhibit resilience, and thus, the moderating relationship is stronger in the full-time work from home model. The paper offers theoretical and managerial implications.

The article investigates the institutional setup of e-lending in public libraries in Denmark, Norway and Sweden. Our point of departure is that e-lending has necessitated new library collaborations between local, regional and national levels, and therefore, institutional e-lending setups have emerged. The study seeks to provide better understanding of how the institutional setups are structured, how governance logics have shaped them and what tensions and dynamics become visible in the key actors’ problematisations of these setups.

The study is situated in the neo-institutional tradition and applies the institutional logics perspective. The research questions are answered by taking a qualitative approach, grounded in an extensive interview study with representatives of libraries, publishers and policy actors in three Scandinavian countries. To provide in-depth insight into e-lending setups, the scope of empirical material is then limited to accounts the central library and policy actors involved in establishing e-lending.

The analysis shows that the e-lending setups are both similar (especially when it comes to financing), and different across Scandinavia, especially when it comes to centralisation and involvement of librarians in this task. The differences are attributed to the influence of different governance logics (question of administrative autonomy, collaboration in the field and existing legal and political frames), and to what extent the digital and market logics are incorporated or rejected in the field.

The study provides new insights into the question of how Scandinavian public libraries face the consequences of the digitalisation of book distribution and consumption by investigating how they organise their e-lending services. This has not been explored before, notably in a comparative perspective.

The purpose of this paper is to investigate the process of fused filament fabrication (FFF) of a compliant gripper (CG) using thermoplastic polyurethane (TPU) material. The paper studies the applicability of different CG designs and the efficiency of some design parameters.

After reviewing a number of different papers, two designs were selected for a number of exploratory experiments. Using design of experiments (DOE) techniques to identify important design parameters. Finally, the efficiency of the parts was investigated.

The research finds that a simpler design sacrifices some effectiveness in exchange for a remarkable decrease in production cost. Decreasing infill percentage of previous designs and 3D printing them, out of TPU, experimenting with different parameters yields functional products. Moreover, the paper identified some key parameters for further optimization attempts of such prototypes.

The cost of conducting FFF experiments for TPU increases dramatically with product size, number of parameters studied and the number of experiments. Therefore, all three of these factors had to be kept at a minimum. Further confirmatory experiments encouraged.

This paper addresses an identified need to investigate applications of FFF and TPU in manufacturing functional efficient flexible mechanisms, grippers specifically. While most research focused on designing for increased performance, some research lacks discussion on design philosophy, as well as manufacturing issues. As the needs for flexible grippers vary from high-performance grippers to lower performance grippers created for specific functions/conditions, some effectiveness can be sacrificed to reduce cost, reduce complexity and improve applicability in different robotic assemblies and environments.

The primary objective of this paper is to show a systematic and methodological approach for the digitalization of critical clinical pathways (CPs) within the healthcare domain.

The methodology entails the integration of service design (SD) and action research (AR) methodologies, characterized by iterative phases that systematically alternate between action and reflective processes, fostering cycles of change and learning. Within this framework, stakeholders are engaged through semi-structured interviews, while the existing and envisioned processes are delineated and represented using BPMN 2.0. These methodological steps emphasize the development of an autonomous, patient-centric web application alongside the implementation of an adaptable and patient-oriented scheduling system. Also, business processes simulation is employed to measure key performance indicators of processes and test for potential improvements. This method is implemented in the context of the CP addressing transient loss of consciousness (TLOC), within a publicly funded hospital setting.

The methodology integrating SD and AR enables the detection of pivotal bottlenecks within diagnostic CPs and proposes optimal corrective measures to ensure uninterrupted patient care, all the while advancing the digitalization of diagnostic CP management. This study contributes to theoretical discussions by emphasizing the criticality of process optimization, the transformative potential of digitalization in healthcare and the paramount importance of user-centric design principles, and offers valuable insights into healthcare management implications.

The study’s relevance lies in its ability to enhance healthcare practices without necessitating disruptive and resource-intensive process overhauls. This pragmatic approach aligns with the imperative for healthcare organizations to improve their operations efficiently and cost-effectively, making the study’s findings relevant.

The purpose of this research is to achieve multi-task autonomous driving by adjusting the network architecture of the model. Meanwhile, after achieving multi-task autonomous driving, the authors found that the trained neural network model performs poorly in untrained scenarios. Therefore, the authors proposed to improve the transfer efficiency of the model for new scenarios through transfer learning.

First, the authors achieved multi-task autonomous driving by training a model combining convolutional neural network and different structured long short-term memory (LSTM) layers. Second, the authors achieved fast transfer of neural network models in new scenarios by cross-model transfer learning. Finally, the authors combined data collection and data labeling to improve the efficiency of deep learning. Furthermore, the authors verified that the model has good robustness through light and shadow test.

This research achieved road tracking, real-time acceleration–deceleration, obstacle avoidance and left/right sign recognition. The model proposed by the authors (UniBiCLSTM) outperforms the existing models tested with model cars in terms of autonomous driving performance. Furthermore, the CMTL-UniBiCL-RL model trained by the authors through cross-model transfer learning improves the efficiency of model adaptation to new scenarios. Meanwhile, this research proposed an automatic data annotation method, which can save 1/4 of the time for deep learning.

This research provided novel solutions in the achievement of multi-task autonomous driving and neural network model scenario for transfer learning. The experiment was achieved on a single camera with an embedded chip and a scale model car, which is expected to simplify the hardware for autonomous driving.

This paper aims to study the application of high-tolerance and flexible indigenous bacteria and fungi, along with the co-metabolism in recycled paper and cardboard mill (RPCM) wastewater treatment (WWT).

The molecular characterization of isolated indigenous bacteria and fungi was performed by 16S rRNA and 18S rRNA gene sequencing, respectively. Glucose was used as a cometabolic substrate to enhance the bioremediation process.

The highest removal efficiency was achieved for both chemical oxygen demand (COD) and color [78% COD and 45% color removal by Pseudomonas aeruginosa RW-2 (MZ603673), as well as approximately 70% COD and 48% color removal by Geotrichum candidum RW-4 (ON024394)]. The corresponding percentages were higher in comparison with the efficiency obtained from the oxidation ditch unit in the full-scale RPCM WWT plant.

Indigenous P. aeruginosa RW-2 and G. candidum RW-4 demonstrated effective capability in RPCM WWT despite the highly toxic and low biodegradable nature, especially with the assistance of glucose.

Expanding on the real-world financial market framework and considering the current market turmoil, with cryptocurrencies (where contracts for difference (CFDs) are extremely common) (Hasso et al., 2019) displaying unprecedented volatility, the authors aim to test in an online laboratory setting whether displaying a risk warning message is truly effective in reducing the level of risk taken and whether the placement of this method makes a difference.

To explore the impact of risk disclosure framing on risk-taking behavior, the authors conducted an online pair-wise lottery choice experiment. In addition to manipulating risk awareness through the presence or absence of risk warning messages of varying intensity, the authors also considered dynamic inconsistency, cognitive ability and questionnaire-based financial risk tolerance (FRT) scores. The authors aimed to identify potential relationships between these variables and experimentally elicited risk aversion. The authors' study offers valuable insights into the complex nature of risky decision-making and sheds light on the importance of considering dynamic inconsistency in addition to risk awareness and aversion.

The authors' results provide statistical evidence for the efficacy of informative and very salient messages in mitigating risky decision, hinting at several policy implications. The authors also provide some statistical evidence in support of the relationship between cognitive abilities and risk preferences. The authors detect that individual with low cognitive abilities scores display great risk aversion.

This study investigates the impact of risk warning messages on investment decisions in an online laboratory setting – a unique approach. However, the authors go beyond this and also examine the potential influence of dynamic inconsistency on decision-making, adding further value to the literature on this topic. To ensure a comprehensive understanding of the participants, the authors collect data on cognitive ability and FRT using questionnaires. This study provides a simple and cost-effective framework that can be easily replicated in future research – a valuable contribution to the field.