Search results

The purpose of this paper is to uncover the significance of SMED in manufacturing environments.

The paper gives setup instructions and guidelines to prepare the standardized setup procedure without ignoring actual constraints in production environment. It uses a case study in a small-scale manufacturing unit of northern India to generate an integrated setup reduction approach, utilizing Single Minute Exchange of Die (SMED)-based industrial engineering tools to achieve faster setups. It describes the feasibility of quick changeovers in small enterprises based on an “SMED” approach. Finally, the paper carries out empirical analysis of the financial/non-financial benefits incurred from setup reductions.

Setup activities are a vital part of the production lead time of any product and so affect overall product cost. Industrial engineering techniques have been used to analyze the existing procedure of setups. A SMED approach can help eliminate unwanted activities, externalize the internal activities, if possible, and reduce them by simplification or standardization.

The paper demonstrates the practical application of SMED showing how it can bring real breakthroughs in reducing setup time in small-scale manufacturing.

There can be activities that cannot reduce times by conventional single minute exchange of die (SMED) tools. In this case more advanced tools are needed. The purpose of this paper is to integrate the fuzzy Taguchi method into the SMED method in order to improve the setup time. The reason for using fuzzy logic is the subjective evaluation of factor’s levels assessment by experts. Subjective assessment contains a certain degree of uncertainty and is vagueness. The fuzzy Taguchi method provides to determining optimal setup time parameters in an activity of SMED. So it is possible to reduce time more than the conventional SMED method.

In this study, the SMED method and the fuzzy Taguchi method are used.

In this study, it has been shown that the setup time is reduced (from 196 to 75 min) and the optimum value can be given at the intermediate value by the fuzzy Taguchi method.

In this limited literature research, the authors have not found a study using the fuzzy Taguchi method in the SMED method.

This paper recommends a method entitled “SMED 4.0” as a development of conventional single minute exchange of die (SMED) to avoid defect occurrence during production and improve sustainability, besides reducing setup time.

The method builds upon an extensive literature review and in-depth explorative research in SMED and zero defect manufacturing (ZDM). SMED 4.0 incorporates an evolutionary stage that employs predict-prevent strategies using Industry 4.0 technologies including the Internet of Things (IoT) and machine learning (ML) algorithms.

It presents the applicability of the proposed approach in (1) identifying the triple bottom line (TBL) criteria, which are affected by defects; (2) predicting the time of defect occurrence if any; (3) preventing defective products by performing online setting on machines during production as needed; (4) maintaining the desired quality of the product during the production and (5) improving TBL sustainability in manufacturing processes.

The extended view of SMED 4.0 in this research, as well as its analytical approach, helps practitioners develop their SMED approaches in a more holistic way. The practical application of SMED 4.0 is illustrated by implementing it in a real-life manufacturing case.

This article aims to introduce a guide to improving hospital bed setup by combining lean technical practices (LTPs), such as kaizen and value stream mapping (VSM) and lean social practices (LSPs), such as employee empowerment.

Action research approach was employed to analyze the process of reconfiguration of bed setup management in a Brazilian public hospital.

The study introduces three contributions: (1) presents the use of VSM focused specifically on bed setup, while the current literature presents studies mainly focused on patient flow management, (2) combines the use of LSPs and LTPs in the context of bed management, expanding current studies that are focused either on mathematical models or on social and human aspects of work, (3) introduces a practical guide based on six steps that combine LSPs and LSPs to improve bed setup management.

The research focused on the analysis of patient beds. Surgical beds, delivery, emergency care and intensive care unit (ICU) were not considered in this study. In addition, the process indicators analyzed after the implementation of the improvements did not contemplate the moment of the COVID-19 pandemic. Finally, this research focused on the implementation of the improvement in the context of only one Brazilian public hospital.

The combined use of LSPs and LTPs can generate considerable gains in bed setup efficiency and consequently increase the capacity of a hospital to admit new patients, without the ampliation of the physical space and workforce.

The improvement of bed setup has an important social character, whereas it can generate important social benefits such as the improvement of the admission service to patients, reducing the waiting time, reducing hospitalization costs and improving the hospital capacity without additional physical resources. All these results are crucial for populations, their countries and regions.

While the current literature on bed management is more focused on formal models or pure human and social perspectives, this article brings these two perspectives together in a single, holistic framework. As a result, this article points out that the complex bed management problem can be efficiently solved by combining LSPs and LTPs to present theoretical and practical contributions to the important social problem of hospital bed management.

This paper aims to examine the role of rational culture in the relationship between lean manufacturing practices and operational productivity in the machinery and equipment industry.

This study uses a cross-sectional quantitative approach to conduct the research. Using an online survey questionnaire, 118 responses were collected. SPSS was used to assess validity, reliability and hypothesis testing of the study variables. Hierarchical regression analysis was employed to investigate the moderating effects of rational culture.

The study results reveal that quick setup and quality control were significantly related to operational productivity. Rational culture was a significant quasi-moderator.

This study highlights the importance of quick setup and quality control for machinery and equipment firms to gain higher operational productivity. Rational culture could be used to drive the firms toward greater achievements in this regard.

The use of rational culture as a quasi-moderator in the relationship between lean manufacturing practices and operational productivity is unprecedented. This study offers new findings by introducing the role of rational culture to enhance the effects of lean manufacturing practices on operational productivity.

The importance of reducing product lotsizes in converting traditional job shops into just‐in‐time (JIT) type manufacturing systems has been addressed in the literature. This paper presents a lotsize reduction model for closed stochastic production systems. The model is formulated based on an M/G/c queuing lotsize model. Product lotsize choice is related to all major components of job flow time: waiting time in queue, batch processing time, batch moving time, and finished goods warehousing time. The research is motivated by the fact that an optimal lotsize solution that minimizes only average job waiting time in the shop may not be optimal when the effects of job batch processing time, batch moving time, and batch warehousing time are also considered. There is no general closed form solution to the model due to the complexity of its nonlinear formulation. Based on the unique properties of the model, heuristic solution procedures are developed. The research demonstrates opportunities for shop managers to significantly reduce product lotsizes while minimizing total operating cost.

This paper aims to systematically understand the development of rapid setup, quantitatively analyze the landscape and reveal new trends and challenges.

Based on 192 literature studies (1987–2021) collected from Scopus and Google Scholar, the papers are classified by: publication time and source; research type and data analysis of papers; pattern of authorship and country; sector-wise focus of the paper; improvement method used in the setup. And CiteSpace is used to analyze the cooccurrence and timeline of keywords.

There has been substantial progress in the past 35 years, including the rapid growth in the number of papers, the expansion in different disciplines, the participation of developing countries, the application in the service industry and the significant impact of setup on cost. And there are still some deficiencies.

There is concern that Google Scholar lacks the quality control needed for its use as a bibliometric tool. Future work is encouraged to conduct an in-depth discussion on high-quality papers.

In small batch production, rapid setup is increasingly essential. Clarifying the research focus and main improvement methods is of great significance for enterprises to meet the changing market needs.

To the best of the authors’ knowledge, this study is the first literature review on rapid setup. It is decided to consider a detailed set of data for better introspection and trace the history reflections and the research future in setup time.

This paper considers the decision problem for a minimum setup strategy of a production system arising in the assembly of printed circuit boards of different types, using a placement machine with multi‐slot feeders. We formulate the problem as a binary linear programming model, and propose a heuristic procedure to find the solution that consists of a board‐assembly sequence, an associated component loading and unloading strategy and a feeder‐assignment plan within reasonable computational effort. Computational results from solving the simulated problem instances by using the heuristic method and the mathematical model are provided and compared. The proposed heuristic procedure can be incorporated into the PCB scheduling optimization software to decrease cycle times and increase overall assembly throughput in a high‐mix, low‐volume PCB manufacturing environment.

Waste is defined as anything other than the minimum amount of resources which are absolutely essential to add value to the product. Resources include equipment, parts, materials, space, energy, worker′s time, and so on. Explores six types of waste which are relevant to all types of operations. Presents ways to eliminate all six. Uses examples relevant to both manufacturing and services. Provides summary implications. Concludes that a systematic and continuous identification and elimination of waste should be used to increase efficiency, improve productivity and enhance competitiveness.

The purpose of this paper is to address the gap between definition and practical aspects of production efficiency in mass customization (MC). The paper summarizes all major issues impacting efficiency in MC. Also, the paper reviews metrics, relationship between various parameters and provides a best practices benchmark toolkit to achieve higher machine efficiencies.

The paper identified and categorized multiple challenges impacting machine efficiency in MC through a literature review spanning over three decades, and also ranked the identified issue-based parameters. Top issues were found varying across different types of industries identified through the review. Metrics pertaining to efficiency and degree of MC are reviewed in the paper. A chronological review of issues is presented, and a chain diagram is built in the paper. Toolkit of best practices created with solution strategies and tools are summarized through the review.

The paper found that MC reasonably impacts machine efficiency which needs to be addressed. Major issues through literature review-based ranking are uncovered, and worldwide research trend and comparison are presented. Active research in this area is observed to be at its peak since 2010. The extensive use of strategies and benchmark toolkit for improving efficiency are summarized.

Ranking of issues has been done through a literature review; hence, there can be skewness depending on the frequency of issues researched by various authors in various areas of industries.

This paper is useful for manufacturing managers and companies willing to increase the size of their product portfolio and choices within their available resources without compromising machine efficiencies and, thereby, the cost. The identified issues help in providing a comprehensive issue list to the academia.

This paper describes what is believed to be the first study that explicitly examines the issues faced in achieving machine efficiency while manufacturing in an MC environment.