Search results

Polyethylene terephthalate (PET) as a fiber molding polymer is widely used in aerospace, electrical and electronic, clothing and other fields. The purpose of this study is to improve the thermal insulation performance of polyethylene terephthalate (PET), the SiO₂ aerogel/PET composites slices and fibers were prepared, and the effects of the SiO₂ aerogel on the morphology, structure, crystallization property and thermal conductivity of the SiO₂ aerogel/PET composites slices and their fibers were systematically investigated.

The mass ratio of purified terephthalic acid and ethylene glycol was selected as 1:1.5, which was premixed with Sb₂O₃ and the corresponding mass of SiO₂ aerogel, and SiO₂ aerogel/PET composites were prepared by direct esterification and in-situ polymerization. The SiO₂ aerogel/PET composite fibers were prepared by melt-spinning method.

The results showed that the SiO₂ aerogel was uniformly dispersed in the PET matrix. The thermal insulation coefficient of PET was significantly reduced by the addition of SiO₂ aerogel, and the thermal conductivity of the 1.0 Wt.% SiO₂ aerogel/PET composites was reduced by 75.74 mW/(m · K) compared to the pure PET. The thermal conductivity of the 0.8 Wt.% SiO₂ aerogel/PET composite fiber was reduced by 46.06% compared to the pure PET fiber. The crystallinity and flame-retardant coefficient of the SiO₂ aerogel/PET composite fibers showed an increasing trend with the addition of SiO₂ aerogel.

The SiO₂ aerogel/PET composite slices and their fibers have good thermal insulation properties and exhibit good potential for application in the field of thermal insulation, such as warm clothes. In today’s society where the energy crisis is becoming increasingly serious, improving the thermal insulation performance of PET to reduce energy loss will be of great significance to alleviate the energy crisis.

In this study, SiO₂ aerogel/PET composite slices and their fibers were prepared by an in situ polymerization process, which solved the problem of difficult dispersion of nanoparticles in the matrix and the thermal conductivity of PET significantly reduced.

The case is written on the basis of published sources only.

Doodlage, a start-up incorporated in 2012 by Kriti Tula, Paras Arora and Vaibhav Kapoor, used discarded waste to create sustainable fashion products. It had a first-mover advantage in recycled fashion goods in the first 10 years of its existence. The company contributed to sustainable fashion by providing an alternative to fast fashion production, creating enormous clothing waste and environmental degradation. In the first quarter of 2022, it saved and reused 15,000 m of fabric waste. From 2018 to 2021, the company grew 150% annually, targeting the right customers and regions to expand its business. It ensured that postproduction industrial waste and postconsumption garments were used to produce clothes. It also confirmed that the waste generated in its fabric screening process was used to create stationery items and other valuable accessories.

However, the sustainable fashion model that gave the company a competitive advantage became obsolete in 2022 due to increasing competition in the industry as various players using unique ideas entered the market. The company is encountering operational and logistical challenges that are affecting its performance. The demand for its products was also subdued due to high prices of upcycled and recycled clothes and less consumer spending post-COVID pandemic. The competitors of Doodlage offered multiple products produced using environmentally friendly farming and manufacturing techniques, attracting sustainable purchasers. What should be the new portfolio of products for the company to explore future growth opportunities? Considering their vast price, can consumers be encouraged to buy upcycled clothes? How should the company ride the winds of change in the industry?

The instructor should initiate the class discussion by asking questions such as how frequently do you shop for clothes? Do you care about the fabric of your apparel? After you discard your clothes, do you think about where these goods finally end up? Data on the amount of total waste generated in the fashion industry should be communicated to students to connect it with the importance of the concept of circular economy. Post this, the instructor should introduce the business model of Doodlage to bring the discussion into the context of the fashion industry before going ahead to discuss the company’s dilemma.

This paper aims to investigate sustainability-led innovation, focusing on the interplay between product and process innovation for sustainability goals and the underlying supplier–customer relationships. Thus, the paper delves into sustainability-led innovation and how it affects supplier–customer relationships, and vice versa, thus providing a twofold perspective.

The textile industry is the empirical context of this study, which is exploratory research based on in-depth, semi-structured interviews with entrepreneurs, managers and experts in the textile industry.

In the textile industry, sustainability-led product innovation concerns mainly product durability and performance, product recyclability and the use of waste for new product development. Process innovation deals with circular economy, traceability and water and chemical use minimization. The paper also shows how sustainability-led innovation is implemented in more technical terms and regarding supplier–customer relationships.

The paper adopts an original perspective on how processes take place in the relationships between suppliers and customers, where there is no dominance of one actor, but innovation emerges from interdependence and interaction. Such perspective allows to provide an in-depth analysis of the supplier–customer relationships and underlying dynamics that affect sustainability-led innovation; moreover, the authors study how such innovation impacts supplier–customer relationships and the underlying relational dynamics. The value of the paper also stands in delivering a real representation of the innovation processes grounded in the textile industry.

The aim of this study is to determine the fracture behavior of wool felt and fabric based epoxy composites and their responses to electromagnetic waves.

Notched and unnotched tensile tests of composites made of wool only and hybridized with a glass fiber layer were carried out, and fracture behavior and toughness at macro scale were determined. They were exposed to electromagnetic waves between 8 and 18 GHz frequencies using two horn antennas.

The keratin and lignin layer on the surface of the wool felt caused lower values to be obtained compared to the mechanical values given by pure epoxy. However, the use of wool felt in the symmetry layer of the laminated composite material provided higher mechanical values than the composite with glass fiber in the symmetry layer due to the mechanical interlocking it created. The use of wool in fabric form resulted in an increase in the modulus of elasticity, but no change in fracture toughness was observed. As a result of the electromagnetic analysis, it was also seen in the electromagnetic analysis that the transmittance of the materials was high, and the reflectance was low throughout the applied frequency range. Hence, it was concluded that all of the manufactured materials could be used as radome material over a wide band.

Sheep wool is an easy-to-supply and low-cost material. In this paper, it is presented that sheep wool can be evaluated as a biocomposite material and used for radome applications.

The combined evaluation of felt and fabric forms of a natural and inexpensive reinforcing element such as sheep wool and the combined evaluation of fracture mechanics and electromagnetic absorption properties will contribute to the evaluation of biocomposites in aviation.

Current evidence indicates that humans and animals are at increased risk of multiple health challenges due to microplastic (MP) profusion. However, mitigation is constrained by inadequate scientific data, further aggravated by the lack of evidence in many African countries. This review therefore synthesized evidence on the current extent of MP pollution in Africa and the analytical techniques for reporting.

A literature search was undertaken in research databases. Medical subject headings (MeSH) terms and keywords were used in the literature search. The authors found 38 studies from 10 countries that met the inclusion criteria.

Marine organisms had MPs prevalence ranging from 19% to 100%, whereas sediments and water samples had between 77 and 100%. The most common and dominant polymers included polypropylene and polyethylene.

This review shows that most studies still use methods that are prone to human errors. Therefore, the concentration of MPs is likely underestimated, even though the authors’ prevalence evaluations show MPs are still largely pervasive across multiple environmental matrices. Also, the study reveals significant spatial disparity in MP research across the African continent, showing the need for further research in other African countries.

Even though some reviews have assessed MPs pollution in Africa, they have not evaluated sample prevalence, which is necessary to understand not only concentration but pervasiveness across the continent. Secondly, this study delves deeper into various methods of sampling, extraction and analysis of MPs, as well as limitations and relevant recommendations.

Though alternative building technologies (ABTs) have been encouraged to address accessible and affordable issues in low-cost housing (LCH) provision, their adoption is still overwhelmed with encumbrances. The encumbrances that hinder ABT adoption require an in-depth study, especially in developing countries like Nigeria. However, studies regarding ABT and its role in improving Nigeria's LCH to achieve Sustainable Development Goal (SDG) 11 are scarce. This research investigates encumbrances to ABT adoption in Nigeria's LCH provision and suggests feasible measures to prevent or reduce the encumbrances, thereby improving achieving SDG 11 (sustainable cities and communities).

This research utilised qualitative research and adopted a face-to-face interview as the primary data collection. The interviewees comprised ABT practitioners and end users in Nigeria who were chosen by a convenient sampling technique. The study's data were analysed manually through a thematic approach.

This study shows that stakeholders should embrace ABT in LCH provision to improve achieving SDG 11 in Nigeria. Also, it clustered the perceived 20 encumbrances to ABT adoption in LCH provision into government/policymaker, housing developers/building contractors, ABT users and ABT manufacturers-related issues in Nigeria's context. This study suggested mechanisms to mitigate encumbrances to ABT adoption in LCH provision, thereby improving achieving SDG 11.

This research adds to the limited literature by analysing ABT adoption encumbrances in Nigeria's LCH provision, which could assist policy formulation for the uptake of ABT in LCH provision and improve achieving Goal 11.

The apparel and textile sector poses a significant environmental challenge due to its substantial contribution to pollution in the form of air, water and soil pollution. To combat these issues, the adoption of sustainable practices is essential. This study aims to identify and analyse the barriers that hinder the progress of sustainability in the apparel and textile industry. By consulting experts in the field, critical barriers were identified and given special attention.

To achieve the research objective, an integrated approach involving Interpretive Structural Modelling (ISM) and fuzzy MICMAC decision-making techniques was employed. The results were further validated through the Decision-Making Trial and Evaluation Laboratory (DEMATEL) method.

The findings highlight that barrier related to clothing disposal, inadequate adaptation to modern technology, challenges affecting sector efficiency and issues related to fashion design are crucial in influencing the remaining six barriers. Based on the outcomes of the DEMATEL method, a comprehensive cause-and-effect diagram was constructed to gain a deeper understanding of these challenges.

This research provides valuable insights for policymakers and stakeholders in the apparel and textile industry. It offers a strategic framework to address and overcome sustainability barriers, promoting the development of a more environmentally responsible and resilient sector.

The purpose of this research is to conduct an in-depth investigation of the barriers apparel and textile sectors. It is feasible that both the management team and the medical experts who provide direct patient care could benefit from this research.