Search results

Despite the well-recognized importance of recycled water, the study of industry-peer pressure on recycled water is relatively new. This study investigates how organizations experience and react to industry-peer pressure to set recycled water targets. Additionally, this study investigates the role of board chairs involved in sustainability committees in contributing to responses to industry-peer pressure.

Using Eviews 12, this study employed a pooled logistic regression model to analyze data from 1,346 firms on Taiwan and Taipei exchanges (2017–2020).

The findings revealed that frequency-based imitation drives recycled water target-setting diffusion. However, there is no direct relationship between outcome-based imitation and recycled water target-setting. Notably, outcome-based imitation drives the adoption of recycled water target-setting of firms with board-chair membership in sustainability committees.

This study faces certain data limitations. First, this study primarily focuses on water recycling. Future research could explore other ways to reduce water usage, such as using water-efficient equipment. Second, this study gathered information solely on the presence or absence of a board chairperson on the sustainability committee. Future researchers could explore the impact of the composition of sustainability committee on recycled water target-setting. Lastly, the sample used in this study is restricted to Taiwan's corporations that existed during 2017–2020. Future researchers may consider adopting a longitudinal design in other economies to address this limitation.

The findings of this study offer several guidelines and implications for recycled water target-setting and the composition of sustainability committees. It responds to an urgent call for solutions to water shortages when pressure from governments and nongovernmental organizations is relatively absent. The number of industry peers that have already set recycled water targets is indispensable for motivating firms to set their own recycled water targets. In terms of insufficient water-related regulatory pressure and normative pressure, this study found evidence suggesting that the direct motivation for setting recycled water targets stems from mimetic pressures via frequency-based imitation. The evidence in this study suggests that policymakers should require companies to disclose their peers’ recycled water target information, as doing so serves as an alternative means to achieving SDG 6.3.

Recycled water target-setting might be challenging. Water recycling practices may face strong resistance and require substantial additional resources (Zhang and Tang, 2019; Gao et al., 2019; Gu et al., 2023). Therefore, this study suggests that firms should ensure the mindfulness of board members in promoting the welfare of the natural environment when making recycled water target-setting decisions. To reap the second-mover advantage, firms must consider the conditions in which board members can more effectively play their role. Corporations may help their chairpersons in setting recycled water targets by recruiting them as members of sustainability committees. Meanwhile, chairpersons tend to activate accurate mental models when the water conservation performance of pioneering industry peers is strong enough to indicate the potential benefits of adopting recycled water target-setting. Investors’ and stakeholders’ understanding of how the composition of sustainability committees is related to recycled water target-setting may help to identify the potential drivers of firms’ water responsibility. Investors and stakeholders should distinguish firms in terms of the board chair’s membership of their sustainability committee and focus on water-use reduction outcomes in the industry. This study provides insights into circumstances whereby chairpersons help to restore the water ecosystem.

This study explains how frequency-based and outcome-based imitation are two prominent mechanisms underlying the industry-peer pressure concerning recycled water target-setting. Moreover, this study fills literature gaps related to the moderating roles of board-chair membership in sustainability committees concerning industry-peer pressure on recycled water target-setting.

The preferences and adoption of recycled materials by consumers are subject to a variety of factors, such as enablers and barriers. Despite this, there exists a paucity of research concerning stakeholders' perceived value and real purchase decision towards recycled products. Consequently, this research study aims to fill this gap by investigating stakeholders' perceived value of recycled products derived from construction and demolition (C&D) waste and its effect on purchase decisions.

Research data were collected from 219 valid questionnaires completed by Chinese stakeholders. Structural equation modeling (SEM) was then employed to test eight hypotheses.

The results show intrinsic cue (materials) and extrinsic cue (brand) influence the stakeholders’ judgment on C&D waste recycled products’ value and then their purchase intention. However, cues such as quality, word-of-mouth, price, policy and advertised have not play a significant role in practice.

This research study verified the significance of brand and material cues on decision making for purchasing C&D waste recycled products, providing new insights to policy making to enhance the uptake of C&D waste recycled products in construction industry.

This paper aims to examine the optimal sourcing strategies and pricing decisions of competing toy manufacturers and to discuss how manufacturers’ decisions are impacted by competition.

The authors consider a single-period model to characterise the competition between two competing toy manufacturers. Both of them are free to choose between virgin material and recycled material. The authors consider two types of consumers: sensitive consumers who are concerned about product safety and prefer the toy made of virgin material and insensitive consumers who do not care what material is used in the toy. The competing manufacturers play a Cournot competition.

The results reveal a special case of a win-win situation for both the manufacturer and the consumer. In addition, an increasing number of sensitive consumers does not always raise the price of virgin-material toys.

The authors derive the manufacturer’s equilibrium sourcing strategies, corresponding market-clearing prices and profits obtained.

The paper investigates how toy manufacturers’ optimal sourcing strategies are impacted by competition, considering market segments.

The present study investigates the impact of opinion leadership and spirituality from three types of social media influencers (SMIs) on individuals’ intentions to conduct recycling. This research is driven by the opinion leadership theory demonstrated by influencer marketing.

This research applies a between-subject experiment to measure the impact of the proposed model. Each participant was exposed to a different influencer: an attractive influencer (Treatment 1, n = 101), an expert influencer (Treatment 2, n = 94), a religious influencer (Treatment 3, n = 99) and a control condition (Treatment 4, n = 102). An ANOVA post-hoc analysis was conducted to further assess the impact dynamics of each influencer based on different demographics such as age, income and level of education. More than 95% of the samples consist of Muslims.

Findings revealed the different dynamics of the effect of opinion leadership and spirituality on the intention to recycle from utilising different types of influencers. Samples derived from a high socio-economic background and exposed to the religious influencer (Treatment 3) have a relatively higher mean score. In general, younger participants with lower incomes and levels of education have less tendency to conduct recycling.

This research attempts to fill the gap in the impact of influencer marketing on green behaviour adoption with the inclusion of spirituality, which has been largely ignored in this context. It offers insights from the perspective of a developing economy that has one of the largest percentages of social media users in the world and from a country that regards a relationship with God as important.

The purpose of this paper is to investigate the effect of the replacement of natural coarse aggregate (NCA) with different percentages of recycled coarse aggregate (RCA) on properties of low calcium fly ash (FA)-based geopolymer concrete (GPC) cured at oven temperature. Further, this paper aims to study the effect of partial replacement of FA by ground granulated blast slag (GGBS) in GPC made with both NCA and RCA cured under ambient temperature curing.

M25 grade of ordinary Portland cement (OPC) concrete was designed according to IS: 10262-2019 with 100% NCA as control concrete. Since no standard guidelines are available in the literature for GPC, the same mix proportion was adopted for the GPC by replacing the OPC with 100% FA and W/C ratio by alkalinity/binder ratio. All FA-based GPC mixes were prepared with 12 M of sodium hydroxide (NaOH) and an alkalinity ratio, i.e. sodium hydroxide to sodium silicate (NaOH:Na₂SiO₃) of 1:1.5, subjected to 90^°C temperature for 48 h of curing. The NCA were replaced with 50% and 100% RCA in both OPC and GPC mixes. Further, FA was partially replaced with 15% GGBS in GPC made with the above percentages of NCA and RCA, and they were given ambient temperature curing with the same molarity of NaOH and alkalinity ratio.

The workability, compressive strength, split tensile strength, flexural strength, water absorption, density, volume of voids and rebound hammer value of all the mixes were studied. Further, the relationship between compressive strength and other mechanical properties of GPC mixes were established and compared with the well-established relationships available for conventional concrete. From the experimental results, it is found that the compressive strength of GPC under ambient curing condition at 28 days with 100% NCA, 50% RCA and 100% RCA were, respectively, 14.8%, 12.85% and 17.76% higher than those of OPC concrete. Further, it is found that 85% FA and 15% GGBS-based GPC with RCA under ambient curing shown superior performance than OPC concrete and FA-based GPC cured under oven curing.

The scope of the present paper is limited to replace the FA by 15% GGBS. Further, only 50% and 100% RCA are used in place of natural aggregate. However, in future study, the replacement of FA by different amounts of GGBS (20%, 25%, 30% and 35%) may be tried to decide the optimum utilisation of GGBS so that the applications of GPC can be widely used in cast in situ applications, i.e. under ambient curing condition. Further, in the present study, the natural aggregate is replaced with only 50% and 100% RCA in GPC. However, further investigations may be carried out by considering different percentages between 50 and 100 with the optimum compositions of FA and GGBS to enhance the use of RCA in GPC applications. The present study is further limited to only the mechanical properties and a few other properties of GPC. For wider use of GPC under ambient curing conditions, the structural performance of GPC needs to be understood. Therefore, the structural performance of GPC subjected to different loadings under ambient curing with RCA to be investigated in future study.

The replacement percentage of natural aggregate by RCA may be further enhanced to 50% in GPC under ambient curing condition without compromising on the mechanical properties of concrete. This may be a good alternative for OPC and natural aggregate to reduce pollution and leads sustainability in the construction.

This study evaluates the potential of using the material extrusion (MEX) process for recycling waste tire rubber (WTR). By investigating the process parameters, mechanical behaviour and morphological characterisation of a thermoplastic polyurethane-waste tire rubber composite filament (TPU-WTR), this study aims to establish a framework for end-of-life tire (ELT) recycling using the MEX technology.

The research assesses the impact of various process parameters on the mechanical properties of the TPU-WTR filament. Hysteresis analysis and Poisson’s ratio estimation are conducted to investigate the material’s behaviour. In addition, the compressive performance of diverse TPU-WTR triply periodic minimal surface lattices is explored to test the filament suitability for printing intricate structures.

Results demonstrate the potential of the TPU-WTR filament in developing sustainable structures. The MEX process can, therefore, contribute to the recycling of WTR. Mechanical testing has provided insights into the influence of process parameters on the material behaviour, while investigating various lattice structures has challenged the material’s capabilities in printing complex topologies.

This research holds significant social implications addressing the growing environmental sustainability and waste management concerns. Developing 3D-printed sustainable structures using recycled materials reduces resource consumption and promotes responsible production practices for a more environmentally conscious society.

This study contributes to the field by showcasing the use of MEX technology for ELT recycling, particularly focusing on the TPU-WTR filament, presenting a novel approach to sustainable consumption and production aligned with the United Nations Sustainable Development Goal 12.

The use of recycled coarse aggregate in concrete structures promotes environmental sustainability; however, performance of these structures might be negatively impacted when it is used as a replacement to traditional aggregate. This paper aims to simulate recycled concrete beams strengthened with carbon fiber-reinforced polymer (CFRP), to advance the modeling and use of recycled concrete structures.

To investigate the performance of beams with recycled coarse aggregate concrete (RCAC), finite element models (FEMs) were developed to simulate 12 preloaded RCAC beams, strengthened with two CFRP strengthening schemes. Details of the modeling are provided including the material models, boundary conditions, applied loads, analysis solver, mesh analysis and computational efficiency.

Using FEM, a parametric study was carried out to assess the influence of CFRP thickness on the strengthening efficiency. The FEM provided results in good agreement with those from the experiments with differences and standard deviation not exceeding 11.1% and 3.1%, respectively. It was found that increasing the CFRP laminate thickness improved the load-carrying capacity of the strengthened beams.

The developed models simulate the preloading and loading up to failure with/without CFRP strengthening for the investigated beams. Moreover, the models were validated against the experimental results of 12 beams in terms of crack pattern as well as load, deflection and strain.

India generates around two million tonnes of e-waste every year, and it is increasing at a very high rate of 30%. However, due to inefficient handling of infrastructure and limited number of collection centres along with the absence of proper incentive structure for producer and recyclers, 95% of e-waste reaches to unorganized sector for disposal. Consumers are not aware of the need of proper e-waste disposal and in absence of proper motivation and they are not inclined towards recycling process. Therefore, this paper aims to identify the best practices of e-waste take adopted all over the world to implement effective policy interventions for e-waste management in India and other emerging economies.

This paper has recommended preventive as well as curative policy interventions on the basis of best e-waste management practices of Germany, Italy and Japan; life cycle assessment of e-waste; and SWOT analysis of Indian electronic product industry.

Preventive measures include a deposit refund scheme wherein a consumer will be responsible for depositing a refundable fees during the purchase of the product. The amount should be arrived at keeping in mind cost involved in handling e-waste and ensure some motivation for the consumers to give back used product. To ensure proper tracking of the product, Radio frequency identification (RFID) tags can be used which will be activated at the time of sale of product and remain so until product reaches some designated recycling space or recycler and consumer is returned back his deposit fee. Subsidy to the producers and recyclers can also be provided by the government to further incentivize the whole process. An example of mobile phones has been used to understand the proposed deposit fees and associated cost structure. Curative measures to reduce the generation of e-waste in long run for managing the discussed issue have also been proposed.

This study is an initiative for proposing and implementing best e-waste take back techniques in a developing economy like India by acquiring learnings from best/advanced economies in terms of e-waste take back.

This study aims to investigate the determinants of household behavioural intention towards household reducing, reusing and recycling behaviour of food waste management.

The data were collected from 670 households in Malaysia and analysed by using the partial least square method.

The findings reveal that motivation to participate, ability to participate and perceived benefits are the crucial factors that significantly influence households’ attitudes. Household attitude has a significant impact on household behavioural intention, whilst social influence and perceived behavioural control are not associated with it. Government support is positively related to perceived behavioural control. The result also indicates that household behavioural intention has a significant impact on household reducing, reusing and recycling behaviour.

The participants of this study were involved in home planning and food preparation in Malaysia. The individuals in charge of the household might have more awareness of food planning and waste control. Thus, it is recommended to adopt findings from other countries and learn from the experience of the local and international communities.

The households’ behavioural intentions can lead to the reducing, reusing and recycling behaviour of food waste management. The government policy mechanisms and households’ awareness can work effectively against food waste reduction because evaluations of the food waste programme were found to be scarce.

Food insecurity is one of the major social problems. Many people are not aware of the food waste impacts and consequences; thus, motivation, knowledge and information should be provided to the consumer through forums and campaigns.

The findings contribute to new insights of household behavioural intention towards food waste reduction management by assessing the determinants of household attitude and government support for food waste reduction management programmes towards household reducing, reusing and recycling behaviours.

Polymer laser powder bed fusion (PBF-LB/P) is an additive manufacturing technology that is sustainable due to the possibility of recycling the powder multiple times and allowing the fabrication of gears without the aid of support structures and subsequent assembly. However, there are constraints in the process that negatively affect its adoption compared to other additive technologies such as material extrusion to produce gears. This study aims to demonstrate that it is possible to overcome the problems due to the physics of the process to produce accurate mechanism.

Technological aspects such as orientation, wheel-shaft thicknesses and degree of powder recycling were examined. Furthermore, the evolving tooth profile was considered as a design parameter to provide a manufacturability map of gear-based mechanisms.

Results show that there are some differences in the functioning of the gear depending on the type of powder used, 100% virgin or 50% virgin and 50% recycled for five cycles. The application of a groove on a gear produced with 100% virgin powder allows the mechanism to be easily unlocked regardless of the orientation and wheel-shaft thicknesses. The application of a specific evolutionary profile independent of the diameter of the reference circle on vertically oriented gears guarantees rotation continuity while preserving the functionality of the assembled mechanism.

In the literature, there are various studies on material aging and reuse in the PBF-LB/P process, mainly focused on the powder deterioration mechanism, powder fluidity, microstructure and mechanical properties of the parts and process parameters. This study, instead, was focused on the functioning of gears, which represent one of the applications in which this technology can have great success, by analyzing the two main effects that can compromise it: recycled powder and vertical orientation during construction.