Search results

A cross-domain intelligent software-defined network (SDN) routing method based on a proposed multiagent deep reinforcement learning (MDRL) method is developed.

First, the network is divided into multiple subdomains managed by multiple local controllers, and the state information of each subdomain is flexibly obtained by the designed SDN multithreaded network measurement mechanism. Then, a cooperative communication module is designed to realize message transmission and message synchronization between the root and local controllers, and socket technology is used to ensure the reliability and stability of message transmission between multiple controllers to acquire global network state information in real time. Finally, after the optimal intradomain and interdomain routing paths are adaptively generated by the agents in the root and local controllers, a network traffic state prediction mechanism is designed to improve awareness of the cross-domain intelligent routing method and enable the generation of the optimal routing paths in the global network in real time.

Experimental results show that the proposed cross-domain intelligent routing method can significantly improve the network throughput and reduce the network delay and packet loss rate compared to those of the Dijkstra and open shortest path first (OSPF) routing methods.

Message transmission and message synchronization for multicontroller interdomain routing in SDN have long adaptation times and slow convergence speeds, coupled with the shortcomings of traditional interdomain routing methods, such as cumbersome configuration and inflexible acquisition of network state information. These drawbacks make it difficult to obtain global state information about the network, and the optimal routing decision cannot be made in real time, affecting network performance. This paper proposes a cross-domain intelligent SDN routing method based on a proposed MDRL method. First, the network is divided into multiple subdomains managed by multiple local controllers, and the state information of each subdomain is flexibly obtained by the designed SDN multithreaded network measurement mechanism. Then, a cooperative communication module is designed to realize message transmission and message synchronization between root and local controllers, and socket technology is used to ensure the reliability and stability of message transmission between multiple controllers to realize the real-time acquisition of global network state information. Finally, after the optimal intradomain and interdomain routing paths are adaptively generated by the agents in the root and local controllers, a prediction mechanism for the network traffic state is designed to improve awareness of the cross-domain intelligent routing method and enable the generation of the optimal routing paths in the global network in real time. Experimental results show that the proposed cross-domain intelligent routing method can significantly improve the network throughput and reduce the network delay and packet loss rate compared to those of the Dijkstra and OSPF routing methods.

Prior research has extensively examined how bringing technology from work into the non-work life domain creates conflict, yet the reverse pathway has rarely been studied. The purpose of this study is to bridge this gap and examine how the non-work use of smartphones in the workplace affects work–life conflict.

Drawing from three literature streams: technostress, work–life conflict and role boundary theory, the authors theorise on how limiting employees' ability to integrate the personal life domain into work, by means of technology use policy, contributes to stress and work–life conflict. To test this model, the authors employ a natural experiment in a company that changed its policy from fully restricting to open smartphone access for non-work purposes in the workplace. The insights gained from the experiment were explored further through qualitative interviews.

Work–life conflict declines when a ban on using smartphones for non-work purposes in the workplace is revoked. This study's results show that the relationship between smartphone use in the workplace and work–life conflict is mediated by sensed stress. Additionally, a post-hoc analysis reveals that work performance was unchanged when the smartphone ban was revoked.

First, this study advances the authors' understanding of how smartphone use policies in the workplace spill over to affect non-work life. Second, this work contributes to the technostress literature by revealing how, in specific situations, engagement with ICT can reduce distress and strain.

This study aims to investigate what past scholars have learned about Muslim consumer compliance behaviour in Islamic banks and identify what future research is needed. In addition, it also explores the relationship model between the previously studied determining factors and the customer’s Sharia compliance behaviour.

This study used a bibliometric–systematic literature review analysis using the Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA) technique by reviewing the articles published from 2013 to 2023. The PRISMA procedures involved several stages, including identification, screening, eligibility, analysis and conclusion based on the findings.

The results found that customer Sharia compliance behaviour determinants in Islamic banks are attitude, subjective norms, perceived behavioural control, Islamic financial literacy, religiosity, consumer conformity, Islamic branding and behavioural intention. Interestingly, the results indicated that such factors as consumer conformity, Islamic branding and sustainable intentions are less discussed.

Decision-makers in Islamic banks must use digital technology to offer better service and make operations more reachable for customers to access information, complete transactions and manage their accounts by Sharia principles. Therefore, the bank needs to continually produce innovative products and services so that customers have a greater variety of options to suit their Sharia-compliant financial needs. Theoretically, this study has contributed by finding the main critical domains influencing customers’ Sharia compliance behaviour, such as attitudes, subjective norms, perceptions of behavioural control, knowledge of Islamic finance, religiosity, consumer conformity, Islamic branding and behavioural intentions. Then, it makes a theoretical contribution by establishing a model that explains how customers make decisions based on Sharia-related factors in the context of their purchases.

Past studies focused on the Sharia compliance behaviour in paying Zakat for takaful customers. Therefore, this study provides critical factors of Sharia compliance behaviour on conformity, Islamic branding and sustainable intention regarding unexplored consensus on the determinants and outcomes of customer Sharia compliance behaviour of Islamic banking.

With the rapid low-carbon transformation in China, the industrial approach and labor structure of mining enterprises are undergoing constant changes, leading to an increasing psychological dilemma faced by coal miners. This study aims to reveal the relationship and mechanism of factors influencing the psychological dilemma of miners, and to provide optimal intervention strategies for the safety and sustainable development of employees and enterprises.

To effectively address the complex issue of the psychological dilemma faced by miners, this study identifies and constructs five-dimensional elements, comprising 20 indicators, that influence psychological dilemmas. The relational mechanism of action of factors influencing psychological dilemma was then elucidated using an integration of interpretive structural modeling and cross-impact matrix multiplication.

Industry dilemma perception is a “direct” factor with dependent attributes. The perceptions of management response and relationship dilemmas are “root” factors with driving attributes. Change adaptation dilemma perception is a “susceptibility” factor with linkage attributes. Work dilemma perception is a “blunt” factor with both dependent and autonomous attributes.

The aforementioned findings offer a critical theoretical and practical foundation for developing systematic and cascading intervention strategies to address the psychological dilemma mining enterprises face, which contributes to advancing a high-quality coal industry and efficient energy development.

Credit risk evaluation is a crucial task for banks and non-bank financial institutions to support decision-making on granting loans. Most of the current credit risk methods rely solely on expert knowledge or large amounts of data, which causes some problems like variable interactions hard to be identified, models lack interpretability, etc. To address these issues, the authors propose a new approach.

First, the authors improve interpretive structural model (ISM) to better capture and utilize expert knowledge, then combine expert knowledge with big data and the proposed fuzzy interpretive structural model (FISM) and K2 are used for expert knowledge acquisition and big data learning, respectively. The Bayesian network (BN) obtained is used for forward inference and backward inference. Data from Lending Club demonstrates the effectiveness of the proposed model.

Compared with the mainstream risk evaluation methods, the authors’ approach not only has higher accuracy and better presents the interaction between risk variables but also provide decision-makers with the best possible interventions in advance to avoid defaults in the financial field. The credit risk assessment framework based on the proposed method can serve as an effective tool for relevant policymakers.

The authors propose a novel credit risk evaluation approach, namely FISM-K2. It is a decision support method that can improve the ability of decision makers to predict risks and intervene in advance. As an attempt to combine expert knowledge and big data, the authors’ work enriches the research on financial risk.

Experiments are the backbone of the development process of data-driven predictive models for scientific applications. The quality of the experiments directly impacts the model performance. Uncertainty inherently affects experiment measurements and is often missing in the available data sets due to its estimation cost. For similar reasons, experiments are very few compared to other data sources. Discarding experiments based on the missing uncertainty values would preclude the development of predictive models. Data profiling techniques are fundamental to assess data quality, but some data quality dimensions are challenging to evaluate without knowing the uncertainty. In this context, this paper aims to predict the missing uncertainty of the experiments.

This work presents a methodology to forecast the experiments’ missing uncertainty, given a data set and its ontological description. The approach is based on knowledge graph embeddings and leverages the task of link prediction over a knowledge graph representation of the experiments database. The validity of the methodology is first tested in multiple conditions using synthetic data and then applied to a large data set of experiments in the chemical kinetic domain as a case study.

The analysis results of different test case scenarios suggest that knowledge graph embedding can be used to predict the missing uncertainty of the experiments when there is a hidden relationship between the experiment metadata and the uncertainty values. The link prediction task is also resilient to random noise in the relationship. The knowledge graph embedding outperforms the baseline results if the uncertainty depends upon multiple metadata.

The employment of knowledge graph embedding to predict the missing experimental uncertainty is a novel alternative to the current and more costly techniques in the literature. Such contribution permits a better data quality profiling of scientific repositories and improves the development process of data-driven models based on scientific experiments.

Kriging surrogate model has demonstrated a powerful ability to be applied to a variety of engineering challenges by emulating time-consuming simulations. However, when it comes to problems with high-dimensional input variables, it may be difficult to obtain a model with high accuracy and efficiency due to the curse of dimensionality. To meet this challenge, an improved high-dimensional Kriging modeling method based on maximal information coefficient (MIC) is developed in this work.

The hyperparameter domain is first derived and the dataset of hyperparameter and likelihood function is collected by Latin Hypercube Sampling. MIC values are innovatively calculated from the dataset and used as prior knowledge for optimizing hyperparameters. Then, an auxiliary parameter is introduced to establish the relationship between MIC values and hyperparameters. Next, the hyperparameters are obtained by transforming the optimized auxiliary parameter. Finally, to further improve the modeling accuracy, a novel local optimization step is performed to discover more suitable hyperparameters.

The proposed method is then applied to five representative mathematical functions with dimensions ranging from 20 to 100 and an engineering case with 30 design variables.

The results show that the proposed high-dimensional Kriging modeling method can obtain more accurate results than the other three methods, and it has an acceptable modeling efficiency. Moreover, the proposed method is also suitable for high-dimensional problems with limited sample points.

This study aims to offer a comprehensive exploration of the potential and challenges associated with sensor fusion-based virtual reality (VR) applications in the context of enhanced physical training. The main objective is to identify key advancements in sensor fusion technology, evaluate its application in VR systems and understand its impact on physical training.

The research initiates by providing context to the physical training environment in today’s technology-driven world, followed by an in-depth overview of VR. This overview includes a concise discussion on the advancements in sensor fusion technology and its application in VR systems for physical training. A systematic review of literature then follows, examining VR’s application in various facets of physical training: from exercise, skill development and technique enhancement to injury prevention, rehabilitation and psychological preparation.

Sensor fusion-based VR presents tangible advantages in the sphere of physical training, offering immersive experiences that could redefine traditional training methodologies. While the advantages are evident in domains such as exercise optimization, skill acquisition and mental preparation, challenges persist. The current research suggests there is a need for further studies to address these limitations to fully harness VR’s potential in physical training.

The integration of sensor fusion technology with VR in the domain of physical training remains a rapidly evolving field. Highlighting the advancements and challenges, this review makes a significant contribution by addressing gaps in knowledge and offering directions for future research.

This study aims to empirically explore several factors that encourage muzakki (zakat payers) to pay their zakat through institutions by elaborating on their extrinsic and intrinsic motivations as the composite factors regarding the attitude and intention improvement of muzakki. This study specifically studies zakat payment via digital means and categorizes the muzakki groups into two (urban and suburban) to be considered in the results.

Overall, this study gathers the data from 298 muzakki using a partial least squares technique the multigroup analysis to compare the analysis.

This study found that different sociodemographic aspects will result in varied performances of motivation in using technology between the two groups. Furthermore, positive preference aspects, such as muzakki’s attitude, can be a catalyst in improving their motivation to pay zakat through institutions.

The findings of this study can be used as a foundation to improve the technology-based services that will be more accessible and reachable. Provision of technical follow-ups regarding the utilization of technology, including community-based digital platform socializations, availability of online customer service that will respond to muzakki’s needs and synergy between stakeholders, are the primary obligations that a zakat institution must fulfill.

As far as the researchers are concerned, the studies focusing on the motivational factors and attitude of muzakki as an intervention in paying zakat via institutions are limited in numbers, especially studies on digital payment. In this study, however, classifying the groups into two will help gain a deeper understanding of this topic.