Search results

This paper aims to define the effect of specimen mesostructure on the monotonic tensile behavior and tensile-fatigue life of layered acrylonitrile butadiene styrene (ABS) components fabricated by fused deposition modeling (FDM).

Tensile tests were performed on FDM dogbone specimens with four different raster orientations according to ASTM standard D638-03. Resulting ultimate tensile stresses (UTS) for each raster orientation were used to compute the maximum stress for fatigue testing, i.e. 90, 75, 60 and 50 or 45 per cent nominal values of the UTS. Multiple specimens were subjected to tension – tension fatigue cycling with stress ratio of R = 0.10 in accordance with ASTM standard D7791-12.

Both tensile strength and fatigue performance exhibited anisotropic behavior. The longitudinal (0°) and default (+45/−45°) raster orientations performed significantly better than the diagonal (45°) or transverse (90°) orientations in regards to fatigue life, as displayed in the resulting Wohler curves.

Raster orientation has a significant effect on the fatigue performance of FDM ABS components. Aligning FDM fibers along the axis of the applied stress provides improved fatigue life. If the direction of applied stresses is not expected to be constant in given application, the default raster orientation is recommended.

This project provides knowledge to the limited work published on the fatigue performance of FDM ABS components. It provides S-N fatigue life results that can serve as a foundation for future work, combining experimental investigations with theoretical principles and the statistical analysis of data.

The purpose of this study, most recent advancements in threedimensional (3D) printing have focused on the fabrication of components. It is typical to use different print settings, such as raster angle, infill and orientation to improve the 3D component qualities while fabricating the sample using a 3D printer. However, the influence of these factors on the characteristics of the 3D parts has not been well explored. Owing to the effect of the different print parameters in fused deposition modeling (FDM) technology, it is necessary to evaluate the strength of the parts manufactured using 3D printing technology.

In this study, the effect of three print parameters − raster angle, build orientation and infill − on the tensile characteristics of 3D-printed components made of three distinct materials − acrylonitrile styrene acrylate (ASA), polycarbonate ABS (PC-ABS) and ULTEM-9085 − was investigated. A variety of test items were created using a commercially accessible 3D printer in various configurations, including raster angle (0°, 45°), (0°, 90°), (45°, −45°), (45°, 90°), infill density (solid, sparse, sparse double dense) and orientation (flat, on-edge).

The outcome shows that variations in tensile strength and force are brought on by the effects of various printing conditions. In all possible combinations of the print settings, ULTEM 9085 material has a higher tensile strength than ASA and PC-ABS materials. ULTEM 9085 material’s on-edge orientation, sparse infill, and raster angle of (0°, −45°) resulted in the greatest overall tensile strength of 73.72 MPa. The highest load-bearing strength of ULTEM material was attained with the same procedure, measuring at 2,932 N. The tensile strength of the materials is higher in the on-edge orientation than in the flat orientation. The tensile strength of all three materials is highest for solid infill with a flat orientation and a raster angle of (45°, −45°). All three materials show higher tensile strength with a raster angle of (45°, −45°) compared to other angles. The sparse double-dense material promotes stronger tensile properties than sparse infill. Thus, the strength of additive components is influenced by the combination of selected print parameters. As a result, these factors interact with one another to produce a high-quality product.

The outcomes of this study can serve as a reference point for researchers, manufacturers and users of 3D-printed polymer material (PC-ABS, ASA, ULTEM 9085) components seeking to optimize FDM printing parameters for tensile strength and/or identify materials suitable for intended tensile characteristics.

Additive manufacturing or “3D printing” is a rapidly expanding sector and is moving from a prototyping service to a manufacturing service in its own right. With a significant increase in sales, fused deposition modelling (FDM) printers are now the most prevalent 3D printer on the market. The increase in commercial manufacturing necessitates an improved understanding of how to optimise the FDM printing process for various product mechanical properties. This paper aims to identify optimum print parameters for the FDM process to achieve maximum tensile strength through a review of recent studies in this field.

The effect of the governing printing parameters on the tensile strength of printed samples will be considered, including material selection, print orientation, raster angle, air gap and layer height.

The key findings include material recommendations, such as the use of emerging print materials like polyether-ether-ketone (PEEK), to produce samples with tensile strength over 200 per cent that of conventional materials such as acrylonitrile butadiene styrene (ABS). Amongst other parameters, it is shown that printing in the “upright” orientation should be avoided (samples can be up to 50 per cent weaker in this orientation) and air gap and raster width should be concurrently optimised to ensure good “inter-raster” bonding. The optimal choice of raster angle depends on print material; in ABS for example, selecting a 0° raster angle over a 90° angle can increase tensile strength by up to 100 per cent.

The paper conclusions provide researchers and practitioners with an up-to-date, single point reference, highlighting a series of robust recommendations to optimise the tensile strength of FDM-printed samples. Improving the mechanical performance of FDM-printed samples will support the continued growth of this technology as a viable production technique.

The purpose of this study is to explore the dependence of material properties and failure criteria for fused deposition modeling (FDM) polycarbonate on raster orientation.

Tension, hardness and density measurements were conducted on a range of specimens at raster angles between 0 and 90° at 15° intervals. Specimens were manufactured so the raster angle was constant throughout each specimen (no rotation between adjacent layers). The yield strength, tensile strength, per cent elongation, elastic modulus, hardness and density of the material were measured as a function of raster angle. The orientation dependence of the properties was then analyzed and used to motivate a failure mechanism map for the material.

The properties of the material were found to be highly orientation-dependent. The variations in mechanical properties were explained to first order using a failure mechanism map similar to those generated for fiber-reinforced composites.

In addition to providing valuable experimental data for FDM polycarbonate, the study proposes micro-mechanisms of failure that appear to explain and capture the angular variation of strength with raster orientation. The fact that analysis methods which have been used for composites appear to apply to FDM materials suggests rich areas for future exploration.

This paper aims to present the methodology and results of the experimental characterization of three-dimensional (3D) printed acrylonitrile butadiene styrene (ABS) and polycarbonate (PC) parts utilizing digital image correlation (DIC).

Tensile and shear characterizations of ABS and PC 3D-printed parts were performed to determine the extent of anisotropy present in 3D-printed materials. Specimens were printed with varying raster ([+45/−45], [+30/−60], [+15/−75] and [0/90]) and build orientations (flat, on-edge and up-right) to determine the directional properties of the materials. Tensile and Iosipescu shear specimens were printed and loaded in a universal testing machine utilizing two-dimensional (2D) DIC to measure strain. The Poisson’s ratio, Young’s modulus, offset yield strength, tensile strength at yield, elongation at break, tensile stress at break and strain energy density were gathered for each tensile orientation combination. Shear modulus, offset yield strength and shear strength at yield values were collected for each shear combination.

Results indicated that raster and build orientations had negligible effects on the Young’s modulus or Poisson’s ratio in ABS tensile specimens. Shear modulus and shear offset yield strength varied by up to 33 per cent in ABS specimens, signifying that tensile properties are not indicative of shear properties. Raster orientation in the flat build samples reveals anisotropic behavior in PC specimens as the moduli and strengths varied by up to 20 per cent. Similar variations were observed in shear for PC. Changing the build orientation of PC specimens appeared to reveal a similar magnitude of variation in material properties.

This article tests tensile and shear specimens utilizing DIC, which has not been employed previously with 3D-printed specimens. The extensive shear testing conducted in this paper has not been previously attempted, and the results indicate the need for shear testing to understand the 3D-printed material behavior fully.

The purpose of this paper is to study the Mode I fracture behavior of polycarbonate (PC) parts produced using fused deposition modeling (FDM). The focus of this study is on samples printed along the out-of-plane direction with different raster angles.

Tensile and Mode I fracture tests were conducted. Semi-circular bend specimens were used for the fracture tests, which were printed in four different raster patterns of (0/90), (15/−75) (30/−60) and (45/−45). Moreover, the finite element method (FEM) was used to determine the applicability of linear elastic fracture mechanics (LEFM) for the printed PC parts. The fracture toughness results, as well as the fracture path and the fracture surfaces, were studied to describe the fracture behavior of the samples.

Finite element results confirm that the use of LEFM is allowed for the tested PC samples. The fracture toughness results show that changing the direction of the printed rasters can have an effect of up to 50% on the fracture toughness of the printed parts, with the (+45/−45) and (0/90) orientations having the highest and lowest resistance to crack propagation, respectively. Moreover, except for the (0/90) orientation, the other samples have higher crack resistance compared to the bulk material. The fracture toughness of the tested PC depends more on the toughness of the printed sample, rather than its tensile strength.

The toughness and the energy absorption capability of the printed samples (with different raster patterns) were identified as the main properties affecting the fracture toughness of the AM PC parts. Because the fracture resistance of almost all the samples was higher than that of the base material, it is evident that by choosing the right raster patterns for 3D-printed parts, very high resistance to crack growth may be obtained. Also, using FEM and comparing the size of the plastic zones, it was concluded that, although the tensile curves show nonlinearity, LEFM is still applicable for the printed parts.

This paper presents an experimental investigation in establishing the relationship between FDM process parameters and tensile strength of polycarbonate (PC) samples using the I-Optimal design.

I-optimal design methodology is used to plan the experiments by means of Minitab-17.1 software. Samples are manufactured using Stratsys FDM 400mc and tested as per ISO standards. Additionally, an artificial neural network model was developed and compared to the regression model in order to select an appropriate model for optimisation. Finally, the genetic algorithm (GA) solver is executed for improvement of tensile strength of FDM built PC components.

This study demonstrates that the selected process parameters (raster angle, raster to raster air gap, build orientation about Y axis and the number of contours) had significant effect on tensile strength with raster angle being the most influential factor. Increasing the build orientation about Y axis produced specimens with compact structures that resulted in improved fracture resistance.

The fitted regression model has a p-value less than 0.05 which suggests that the model terms significantly represent the tensile strength of PC samples. Further, from the normal probability plot it was found that the residuals follow a straight line, thus the developed model provides adequate predictions. Furthermore, from the validation runs, a close agreement between the predicted and actual values was seen along the reference line which further supports satisfactory model predictions.

This study successfully investigated the effects of the selected process parameters - raster angle, raster to raster air gap, build orientation about Y axis and the number of contours - on tensile strength of PC samples utilising the I-optimal design and ANOVA. In addition, for prediction of the part strength, regression and ANN models were developed. The selected ANN model was optimised using the GA-solver for determination of optimal parameter settings.

The proposed ANN-GA approach is more appropriate to establish the non-linear relationship between the selected process parameters and tensile strength. Further, the proposed ANN-GA methodology can assist in manufacture of various industrial products with Nylon, polyethylene terephthalate glycol (PETG) and PET as new 3DP materials.

Fused deposition modelling (FDM) is the most economical additive manufacturing technique. The purpose of this paper is to describe a detailed review of this technique. Total 211 research papers published during the past 26 years, that is, from the year 1994 to 2019 are critically reviewed. Based on the literature review, research gaps are identified and the scope for future work is discussed.

Literature review in the domain of FDM is categorized into five sections – (i) process parameter optimization, (ii) environmental factors affecting the quality of printed parts, (iii) post-production finishing techniques to improve quality of parts, (iv) numerical simulation of process and (iv) recent advances in FDM. Summary of major research work in FDM is presented in tabular form.

Based on literature review, research gaps are identified and scope of future work in FDM along with roadmap is discussed.

In the present paper, literature related to chemical, electric and magnetic properties of FDM parts made up of various filament feedstock materials is not reviewed.

This is a comprehensive literature review in the domain of FDM focused on identifying the direction for future work to enhance the acceptability of FDM printed parts in industries.

This paper aims to present a hierarchical multiscale model to evaluate the effect of fused deposition modeling (FDM) process parameters on mechanical properties. Asymptotic homogenization mathematical theory is developed into two scales (micro and macro scales) to compute the effective elastic and shear modulus of the printed parts. Four parameters, namely, raster orientation, layer height, build orientation and porosity are studied.

The representative volume elements (RVEs) are generated by mimicking the microstructure of the printed parts. The RVEs subjected to periodic boundary conditions were solved using finite element. The experimental characterization according to ASTM D638 was conducted to validate the computational modeling results.

The computational model reports reduction (E1, ∼>38%) and (G12, ∼>50%) when porosity increased. The elastic modulus increases (1.31%–47.68%) increasing the orthotropic behavior in parts. Quasi-solids parts (100% infill) possess 10.71% voids. A reduction of 11.5% and 16.5% in elastic modulus with layer height is reported. In total, 45–450 oriented parts were highly orthotropic, and 0–00 parts were strongest. The order of parameters affecting the mechanical properties is porosity > layer height > raster orientation > build orientation.

This study adds value to the state-of-the-art terms of construction of RVEs using slicing software, discarding the necessity of image processing and study of porosity in FDM parts, reporting that the infill density is not the only measure of porosity in these parts.

This paper aims to provide an overview of the recent findings of the mechanical properties of parts manufactured by fused deposition modeling (FDM). FDM has become a widely used technique for the manufacturing of thermoplastic parts. The mechanical performance of these parts under service conditions is difficult to predict due to the large number of process parameters involved. The review summarizes the current knowledge about the process-property relationships for FDM-based three-dimensional printing.

The review first discusses the effect of material selection, including pure thermoplastics and polymer-matrix composites. Second, process parameters such as nozzle temperature, raster orientation and infill ratio are discussed. Mechanisms that these parameters affect the specimen morphology are explained, and the effect of each parameter on the strength of printed parts are systematically presented.

Mechanical properties of FDM-produced parts strongly depend on process parameters and are usually lower than injection-molded counterparts. There is a need to understand the effect of each parameter and any synergistic effects involved better.

Through the optimization of process parameters, FDM has the potential to produce parts with strength values matching those produced by conventional methods. Further work in the field will make the FDM process more suitable for the manufacturing of load-bearing components.

This paper presents a critical assessment of the current knowledge about the mechanical properties of FDM-produced parts and suggests future research directions.