Search results

The conventional project delivery (CPD) approach has been reported in the literature as the most widely used project delivery method in the construction industry globally compared to other delivery methods. However, researchers and practitioners have argued that the approach, specifically during the production of design documentation under the CPD, lacks certain capabilities that ensure quality and enhance project delivery. Therefore, this study aims to use the Ghanaian construction industry to identify the capabilities required of the CPD in practice, particularly during the production of design documentation.

The study design follows a pragmatist philosophy and uses mixed methods based on a deductive approach. Data collection involved a questionnaire survey, followed by semi-structured interviews. Quantitative data analysis used descriptive and inferential statistics, whereas qualitative data analysis used content analysis with the assistance of IBM SPSS and QSR Nvivo 12 Pro.

Findings indicate that there should be incentives for producing good design documentation quality; mandatory coordination of design documentation; improving collaboration among designers; and allowing contractors to make input during the design stage.

The results indicate the need for the identified capabilities to be introduced in the CPD approach to improve design documentation quality.

This study offers a significant insight into the specific capabilities that are required of the CPD approach in practice particularly, in the production of design documentation

Sustainable/Green building materials (SBMs/GBMs) offer a wide range of benefits which cut across the economic, social and environmental dimensions of sustainability. The incorporation of these materials in construction projects in most developing countries is still low owing to some factors. This study assessed the major barriers to the incorporation of SBMs in the delivery of construction projects in developing countries, with Nigeria as a case in point.

The well-structured quantitative questionnaire was used to gather data from the key players in the construction industry, using the snowball sampling method and electronic means of questionnaire administration. Frequencies, percentile, relative importance index, Kruskal–Wallis H test, Kendall's coefficient of concordance and exploratory factor analysis were used to analyse the gathered data.

The study revealed that the major constructs of barriers to SBM adoption in construction projects are: (1) resistance and information barriers (Eigenvalues = 5.237; % of V = 23.806), (2) regulation and funding of R&D (Eigenvalues = 2.741; % of V = 12.457), (3) cost and market barriers (Eigenvalues = 2.223; % of V = 10.105), (4) government incentive and suppliers' availability (Eigenvalues = 1.728; % of V = 7.852) and (5) GB experts and labour barriers (Eigenvalues = 1.307; % of V = 5.942).

This study assessed the view of construction experts in the five states of the south-eastern geo-political zone of Nigeria, particularly as regards the barriers to the incorporation of sustainable building materials in construction projects in the region.

This paper aims to identify and determine regional tourism axes in Hormozgan Province, Iran, as a region with significant potential

The research method is quantitative and uses the fuzzy accreditation tool and TOPSIS model; the identification, determination and ranking of regional tourism axes have been performed by analyzing the spatial distribution of tourism attractions in the GIS environment.

The results show that given the capacities of Hormozgan Province, at least 15 axes are recognizable. This paper highlights regional tourism planning as a tool for urban and rural socio-economic development in potential provinces such Hormozgan.

This study provides a number of practical implications for regional tourism development as follows: it identifies some of the most important potential axes in Hormozgan Province, which can be considered as investment areas in the national and regional tourism development strategy. The spatial results of this study could be embedded in all urban and rural developmental plans in the province. Tourism investment should shift its spatial concentration from the spot approach, especially islands and cities, to the axis approach while equipping those axes as comprehensive spatial strategic regional tourism plans. Sectoral tourism in each sector including sports, economy and nature could be planned as if sectoral institutions and organizations are going to develop their own tourism goals.

The purpose of this paper is to reveal the main causes of delays in the projects are from the client (relative importance index (RII)=0.716), labor and equipment (RII=0.701) and contractor (RII=0.698). Hence determining the contractual responsibility of delay is the most likely source of dispute in construction projects and many techniques have been used in the courts to demonstrate the criticalities of a delay event on the project schedule. Therefore, authors try to investigate all process-based techniques of delay claims and evaluated and conformed them with principles by Society of Construction Law (SCL) protocol and Association for the Advancement of Cost Engineering International (AACEI) in order to choose the best techniques based on the specific circumstances of each project.

This section is divided into two distinct parts: refers to the methods used to assess the perceptions of clients, consultants, and contractors on the relative importance of causes of delay in construction industry; and refers to advantages and disadvantages of various techniques used to analyze delays and their conform with SCL protocol. A questionnaire was developed to assess the perceptions of clients, consultants, and contractors on the relative importance of causes of delay in Iranian construction industry. The respondents were asked to indicate their response category on 78 well-recognized construction delay factors identified by authors.

In total, 78 causes of delay were identified through research. The identified causes are combined into seven groups. The field survey included 58 contractors, 55 consultants, and 62 client. Data collected were analyzed by RII and Statistical Package for Social Sciences (SPSS). The authors identified main causes of delay and ten most important causes, according to Table AII, from the perspective of three major groups of participants (clients, consultants and contractors). The ranking of categories of causes of delay, according to Table I, were: client-related causes (RII=0.716); labor and equipment category causes (RII=0.701); contractor-related causes (RII=0.698); material-related causes (RII=0.690); design-related causes (RII=0.666); external causes (RII=0.662); and consultant-related causes (RII=0.662). But according to the discussions and given that determining the contractual responsibility of delay is the most likely source of dispute in construction industry and many techniques have been used in the courts to demonstrate the criticalities of a delay event on the project schedule.

All process-based techniques of delay analysis have been present in this paper and categorized in 11 groups. In order to understand the advantages and disadvantages of them by clients, contractor and consultant, a thorough review conducted to reveal the nature of techniques. In the next step, given that selecting the most appropriate technique based on constraints and specific conditions of each project is one of the most important steps to carry out a successful delay analysis. The authors conformed, all process-based techniques of delay analysis, by SCL protocol and AACEI principles. Finally, the result of this match was brought in order to choose the best technique based on the specific circumstances of each project.

The purpose of this study is to look at the United Arab Emirates’ (UAE's) progress toward economic diversification and becoming a knowledge-based economy.

The World Development Indicators (WDI) and GlobalEconomy websites provided all secondary data for this paper. The data are largely used to highlight the UAE's current level of diversification and, consequently, the atmosphere for a knowledge economy transition necessary for sustainable development. Additionally, the study conducts a nonparametric estimation using DEA to identify the condition of four variables pertaining to the UAE's knowledge economy. The Herfindahl-Hirschman index (HHI) was utilized empirically in this study to determine the current state of diversity.

According to this research, the UAE economy was reasonably diverse until recently. The number of patents and journal papers published per resident both add to the UAE's GDP. Furthermore, the UAE's information and communication technology (ICT) exports are inconsistent; a declining trend in the number of researchers and the education sector's continuous struggles are major concerns. Furthermore, Figure 1 in the introduction reinforces this conclusion by noting that construction and building remained the greatest employer of labor throughout the time period. This is a significant finding because, as illustrated in this research, low labor force participation in the education sector, combined with lower citizen participation in advanced education in the UAE, results in low scientific research and publications, with low knowledge output as patent applications. In general, the majority of the UAE's population is expat, and the extent to which locals and expats contribute to the overall advancement of education remains an open question. According to the data envelopment analysis (DEA) model, three variables in the knowledge economy are productive, and they are economic incentive and institutional regime, innovation systems and ICT. The findings of this article will aid policymakers in the UAE, and more generally in the Gulf Cooperation Council (GCC) region, in developing more successful policies that help in the growth of a knowledge- and innovation-based economy.

This study is appropriate for UAE economic policymakers to monitor the state and policies required for the UAE's transition to a knowledge economy.

This issue has rarely been addressed by the use of robust parametric and nonparametric processes, as well as robust data visualization tools.

This paper aims to introduce a crowd-based method for theorizing. The purpose is not to achieve a scientific theory. On the contrary, the purpose is to achieve a model that may challenge current scientific theories or lead research in new phenomena.

This paper describes a case study of theorizing by using a crowd-based method. The first section of the paper introduces what do the authors know about crowdsourcing, crowd science and the aggregation of non-expert views. The second section details the case study. The third section analyses the aggregation. Finally, the fourth section elaborates the conclusions, limitations and future research.

This document answers to what extent the crowd-based method produces similar results to theories tested and published by experts.

From a theoretical perspective, this study provides evidence to support the research agenda associated with crowd science. The main limitation of this study is that the crowded research models and the expert research models are compared in terms of the graph. Nevertheless, some academics may argue that theory building is about an academic heritage.

This paper exemplifies how to obtain an expert-level research model by aggregating the views of non-experts.

This study is particularly important for institutions with limited access to costly databases, labs and researchers.

Previous research suggested that a collective of individuals may help to conduct all the stages of a research endeavour. Nevertheless, a formal method for theorizing based on the aggregation of non-expert views does not exist. This paper provides the method and evidence of its practical implications.

The paper investigates whether Granger causal relationships exist between bond market development, stock market development, economic growth and two other macroeconomic variables, namely, inflation rate and real interest rate. The study aims to expand the domain of economic growth by including a more in-depth analysis of the possible impact that bond market and stock market development has on economic growth than is normally found in the literature.

This paper uses a panel data set of the G-20 countries for the period 1991-2016. It uses a panel vector auto-regression model to reveal the nature of any Granger causality among the five variables.

The paper provides empirical insights that both bond market development and stock market development are cointegrated with economic growth, inflation rate and real interest rate. The most robust result from the panel Granger causality test is that bond market development, stock market development, inflation rate and real interest rate are demonstrable drivers of economic growth in the long run.

Because of the chosen research approach, the research results may lack theoretical foundations. Therefore, perhaps the more fully grounded interactive findings of this study can inspire theorists to fill the missing gap.

This paper includes lessons for policymakers in the G-20 countries seeking to stimulate economic growth in the long run and how they need to ensure greater stability of the interest rate and inflation rate as well as fully developing their financial markets, as both bond markets and stock markets are obvious drivers of economic growth.

This paper fulfills an identified need to study causal relationships between bond market development, stock market development, economic growth and two other macroeconomic variables, i.e. inflation rate and real interest rate.