Search results

The purpose of this study is to solve the issues of time-consuming and complicated computation of traditional measures, as well as the underutilization of two-dimensional (2D) phase-trajectory projection matrix, so a new set of features were proposed based on the projection of attractors trajectory to characterize the friction-induced attractors and to reveal the tribological behavior during the running-in process.

The frictional running-in experiments were conducted by sliding a ball against a static disk, and the friction coefficient was collected to reconstruct the friction-induced attractors. The projection of the attractors in 2D subspace was then mapped and the distribution of phase points was adapted to conduct the feature extraction.

The evolution of the proposed moment measures could be described as “initial rapid decrease/increase- midterm gradual decrease/increase- finally stable,” which could effectively reveal the convergence degree of the friction-induced attractors. Moreover, the measures could also describe the relative position of the attractors in phase–space domain, which reveal the amplitude evolution of signals to some extent.

The proposed measures could reveal the evolution of tribological behaviors during the running-in process and meet the more precise real-time running-in status identification.

This study aims to synthesize Prussian blue {Fe^III₄[Fe^II(CN)₆]₃} pigment by reacting ferric chloride with different ferrocyanides through the same procedure. The influence of the ferrocyanide used on resulting pigment properties is studied.

Prussian blue is commonly synthesized by direct or indirect methods, through iron salt and ferrocyanide/ferricyanide reactions. In this study, the direct, single-step process was pursued by dropwise addition of the ferrocyanide into ferric chloride (both as aqueous solutions). Two batches – (K-PB) and (Na-PB) – were prepared by using potassium ferrocyanide and sodium ferrocyanide, respectively. The development of pigment was confirmed by an identification test and characterized by spectroscopic techniques. Pigment properties were determined, and light fastness was observed for acrylic emulsion films incorporating dispersed pigment.

The two pigments differed mainly in elemental detection owing to the dissimilar ferrocyanide being used; IR spectroscopy where only (Na-PB) showed peaks indicating water molecules; and bleeding tendency where (K-PB) was water soluble whereas (Na-PB) was not. The pigment exhibited remarkable blue colour and good bleeding resistance in several solvents and showed no fading in 24 h of light exposure though oil absorption values were high.

This article is a comparative study of Prussian blue pigment properties obtained using different ferrocyanides. The dissimilarity in the extent of water solubility will influence potential applications as a colourant in paints and inks. K-PB would be advantageous in aqueous formulations to confer a blue colour without any dispersing aid but unfavourable in systems where other coats are water-based due to their bleeding tendency.

This study aims to explore how to overcome and address the loss of exploratory innovation, thereby achieving greater success in exploratory innovation. This phenomenon of loss occurs when enterprises decrease their investment in and engagement with exploratory innovation, ultimately leading to an insufficient amount of such innovation efforts. Drawing on dynamic capabilities, this study investigates the relationship between organizational foresight and exploratory innovation and examines the moderating role of breakthrough orientation/financial orientation.

This study used survey data collected from 296 Chinese high-tech companies in multiple industries and sectors.

The evidence produced by this study reveals that three elements of organizational foresight (i.e. environmental scanning capabilities, strategic selection capabilities and integrating capabilities) positively influence exploratory innovation. Furthermore, this positive effect is strengthened in the context of a high-breakthrough orientation. Moreover, the relationships among environmental scanning capabilities, strategic selection capabilities and exploratory innovation become weaker as an enterprise’s financial orientation increases, whereas a strong financial orientation does not affect the relationship between integrating capabilities and exploratory innovation.

Ambidexterity is key to successful enterprise innovation. Compared with exploitative innovation, it is by no means easy to engage in exploratory innovation, which is especially important in high-tech companies. While the loss of exploratory innovation has been observed, few empirical studies have explored ways to promote exploratory innovation more effectively. A key research implication of this study pertains to the role of organizational foresight in the improvement of exploratory innovation in the context of high-tech companies.

This paper contributes to the broader literature on exploratory innovation and organizational foresight and provides practical guidance for high-tech companies regarding ways of avoiding the loss of exploratory innovation and becoming more successful at exploratory innovation.

Research for the case study was conducted using a combination of semi-structured interviews and secondary data sources.

This case traces the international expansion of Sadowsky Guitars’ bass guitar product line. Roger Sadowsky is one of the most respected instrument makers in the world and gained early acclaim for his outstanding repair and restoration work on guitars and basses. Some of his early clients included Prince, Will Lee (The Tonight Show), Tom Hamilton of Aerosmith, Jason Newsted of Metallica, Eddie Van Halen and Marcus Miller. Roger’s reputation and the demand for his instruments led to some customers having to wait for more than a year to obtain the chance to purchase a Sadowsky instrument, while others were unable to do so due to financial constraints. In 2003, Roger made the decision to form Sadowsky Japan to begin the contract manufacturing of more affordable Sadowsky instruments in Tokyo, Japan. As the company grew in size, Roger realized he was becoming more focused on running a business than building instruments. Furthermore, his Japanese partners were only interested in serving the Japanese market. This required him to handle the sales and distribution in the remaining parts of the world. In December of 2019, he announced a new, exclusive licensing agreement and distribution partnership between Sadowsky Guitars and Warwick GmbH & Co Music Equipment KG. The new agreement allowed Roger to continue running the Sadowsky NYC Custom Shop while Warwick would take over building and distributing the Metro instruments and a less-expensive, Chinese-built version of the MetroExpress instruments.

This case is appropriate for undergraduate and graduate-level courses related to marketing and consumer behavior. The case walks students through a real-life scenario when the founder of a well-known musical brand sought to expand internationally as a way to meet growing market demand. Students are asked to consider the advantages and disadvantages of the five key international market entry strategies: exporting, licensing, contract manufacturing, joint ventures and investment (equity/acquisition).

The case works well in the classroom, even if people are unfamiliar with the musical instrument retail industry. Participants are most likely aware of some of the artists and musicians mentioned in the case. Some may also be or know musicians. The instructor should be able to quickly engage participants in a lively discussion about Roger Sadowsky’s vision for his instruments and the opportunities and challenges of expanding product offerings and increasing market share.

Teaching notes are available for educators only.

There has been a recently growing interest by architects in practice-based research and the impact of research. At the same time, several post-graduate architecture programmes with practice-led research agendas were founded. This shift towards architectural design research is analysed using the notions of “process-driven research”, “output-driven research” and “impact”. The study aims to investigate and unveil the link between graduate programmes and graduates with a research interest and to test the tripartite model of “process-driven research”, “output-driven research” and “impact” in the context of small architectural practices.

The study uses a qualitative and exploratory research approach that includes 11 in-depth interviews conducted in 2020, during the first nationwide COVID-19 lockdown in the United Kingdom (UK) selected interviews were architects representing (1) members or alumni of practice-related graduate architecture programmes in London and (2) founders of London-based small architectural practices within the last decade.

While focussing on the London context, the paper offers transferable insights for the key potentials of practice-led design research in small architectural practices and the actions that might improve research practice.

This paper addresses a lack of studies on how design research differs between diverse types and sizes of architectural firms, why emerging small architectural practices increasingly engage with research and how this shapes their practice. This knowledge is important to fully understanding architectural design research and its strengths or weaknesses.

Recently, both researchers and practitioners have been very interested in the impact of leadership on employee engagement. Thus, I aimed to examine the relationship between spiritual leadership and work engagement through the mediating role of spiritual well-being at work.

I assessed spiritual leadership, engagement, and well-being in an empirical study based on a sample of 223 employees. I collected data through a survey-based method and analyzed them using structural equation modeling (SEM).

The present study contributes to the existing knowledge in the leadership field, especially spiritual leadership. The results revealed that spiritual leadership impacts employees’ work engagement by indirectly influencing employees’ spiritual well-being.

Theoretically, the findings imply that spiritual well-being can be one of the factors considered in enhancing work engagement through spiritual leadership.

Finding evidence that spiritual leadership, like other leadership styles, can foster employee engagement. Therefore, leaders should take care of employees’ spiritual needs.

Many researchers have indicated that well-being is associated with employee engagement. However, they overlooked employees’ spiritual well-being in the research. The study confirmed the unexplored mediating role of spiritual well-being between spiritual leadership and employee engagement.

Barriers to adequate healthcare in rural areas remain a grand challenge for local healthcare systems. In addition to patients' travel burdens, lack of health insurance, and lower health literacy, rural healthcare systems also experience significant resource shortages, as well as issues with recruitment and retention of healthcare providers, particularly specialists. These factors combined result in complex change management-focused challenges for rural healthcare systems. Change management initiatives are often resource intensive, and in rural health organizations already strapped for resources, it may be particularly risky to embark on change initiatives. One way to address these change management concerns is by leveraging socio-technical simulation models to estimate techno-economic feasibility (e.g., is it technologically feasible, and is it economical?) as well as socio-utility feasibility (e.g., how will the changes be utilized?). We present a framework for how healthcare systems can integrate modeling and simulation techniques from systems engineering into a change management process. Modeling and simulation are particularly useful for investigating the amount of uncertainty about potential outcomes, guiding decision-making that considers different scenarios, and validating theories to determine if they accurately reflect real-life processes. The results of these simulations can be integrated into critical change management recommendations related to developing readiness for change and addressing resistance to change. As part of our integration, we present a case study showcasing how simulation modeling has been used to determine feasibility and potential resistance to change considerations for implementing a mobile radiation oncology unit. Recommendations and implications are discussed.

The purpose of this paper is to explore the importance of personalisation in the relationship between the architectural design of homes and inhabitants’ psychological well-being.

This interdisciplinary mixed-method study first investigates the existence of a link between personalisation and users’ association with home through a quantitative study (n = 101) and then explores the nature of this relationship through qualitative interviews (n = 13) in a sequential explanatory approach.

The main findings of the study highlight the significance of personalisation in relation to the way people perceive home. A direct link was established between participants’ involvement in the transformation of the home and their satisfaction with the residence, as well as satisfaction with life in general. Further thematic analysis of the qualitative study revealed further conceptualisations of personalisation, which together form an umbrella concept called transformability.

The findings underscore the need for embedding flexibility as an architectural concept in the design of residential buildings for improving the well-being of occupants.

The design of homes has a great impact on inhabitants’ psychological well-being. This is becoming of greater importance in light of the global COVID-19 pandemic that has led to an increase in the amount of time spent in homes. This research contributes to this debate by proposing concepts for a deeper understanding of architectural influences on the psychology of the home.