Search results

Scatter in the outcome of repeated experiments is unavoidable due to measurement errors in addition to the non-linear nature of the output responses with unknown influential input parameters. It is a standard practice to select an orthogonal array in the Taguchi approach for tracing optimum input parameters by conducting a few number of experiments and confirm them through additional experimentation (if necessary). The purpose of this paper is to present a simple methodology and its validation with existing test results in finding the expected range of the output response by suggesting modifications in the Taguchi method.

The modified Taguchi approach is proposed to find the optimum process parameters and the expected range of the output response.

This paper presents a simple methodology and its validation with existing test results in finding the expected range of the output response by suggesting modifications in the Taguchi method.

Adequacy of this methodology should be examined by considering the test data on different materials and structures.

The introduction of Chauvenet’s criterion and opposing the signal-to-noise ratio transformation on repeated experiments of each test run will provide fruitful results and less computation burden.

This paper adopts a modified Taguchi approach to develop empirical relationships to the performance characteristics (output responses) in terms of process variables and demonstrated their validity through comparison of test data. The method suggests a few tests as per the orthogonal array and provides complete information for all combinations of levels and process variables. This method also provides the estimated range of output responses so that the scatter in the repeated tests can be assessed prior to the tests.

In order to obtain defect-free products meeting the required specifications, researchers have conducted extensive experiments using powder bed fusion (PBF) process measuring the performance indicators (namely, relative density, surface roughness and hardness) to specify a set of printing parameters (namely, laser power, scanning speed and hatch spacing). A simple and reliable multi-objective optimization method is considered in this paper for specifying a set of optimal process parameters with SS316 L powder. It was reported that test samples printed even with optimal set of input variables revealed irregular shaped, microscopic porosities and improper melt pool formation.

Finally, based on detailed analysis, it is concluded that it is impossible to express the performance indicators, explicitly in terms of equivalent energy density (E_0ˆ*), which is a combination of multiple sets of selective laser melting (SLM) process parameters, with different performance indicators. Empirical relations for the performance indicators are developed in terms of SLM process parameters. Test data are within/close to the expected range.

Based on extensive analysis of the SS316 L data using modified Taguchi approach, the optimized process parameters are laser power = 298 W, scanning speed = 900 mm/s and hatch distance = 0.075 mm, for which the results of surface roughness = 2.77 Ra, relative density = 99.24%, hardness = 334 Hv and equivalent energy density is 4.062. The estimated data for the same are surface roughness is 3.733 Ra, relative density is 99.926%, hardness is 213.64 Hv and equivalent energy density is 3.677.

Even though equivalent energy density represents the energy input to the process, the findings of this paper conclude that energy density should no longer be considered as a dependent process parameter, as it provides multiple results for the specified energy density. This aspect has been successfully demonstrated in this paper using test data.

The purpose of this paper is to adopt the multi-objective optimization technique for identifying a set of optimum abrasive water jet machining (AWJM) parameters to achieve maximum material removal rate (MRR) and minimum surface roughness.

Data of a few experiments as per the Taguchi’s orthogonal array are considered for achieving maximum MRR and minimum surface roughness (Ra) of the Inconel718. Analysis of variance is performed to understand the statistical significance of AWJM input process parameters.

Empirical relations are developed for MRR and Ra in terms of the AWJM process parameters and demonstrated their adequacy through comparison of test results.

The signal-to-noise ratio transformation should be applied to take in to account the scatter in the repetition of tests in each test run. But, many researchers have adopted this transformation on a single output response of each test run, which has no added advantage other than additional computational task. This paper explains the impact of insignificant process parameter in selection of optimal process parameters. This paper demands drawbacks and complexity in existing theories prior to use new algorithms.

Taguchi approach is quite simple and easy to handle optimization problems, which has no practical implications (if it handles properly). There is no necessity to hunt for new algorithms for obtaining solution for multi-objective optimization AWJM process.

This paper deals with a case study, which demonstrates the simplicity of the Taguchi approach in solving multi-objective optimization problems with a few number of experiments.

Introduction: With many new technologies requiring real-time data processing, cloud computing has become challenging to implement due to high bandwidth and high latency requirements.

Purpose: To overcome this issue, edge computing is used to process data at the network’s edge. Edge computing is a distributed computing paradigm that brings computation and data storage closer to the location where it is needed. It is used to process time-sensitive data.

Methodology: The authors implemented the model using Linux Foundation’s open-source platform EdgeX Foundry to create an edge-computing device. The model involved getting data from an on-board sensor (on-board diagnostics (OBD-II)) and the GPS sensor of a car. The data are then observed and computed to the EdgeX server. The single server will send data to serve three real-life internet of things (IoT) use cases: auto insurance, supporting a smart city, and building a personal driving record.

Findings: The main aim of this model is to illustrate how edge computing can improve both latency and bandwidth usage needed for real-world IoT applications.

As the world continues to urbanise, cities face increasing pressure to become more sustainable, efficient and livable. Sustainable smart cities are emerging as a promising solution to this challenge, leveraging technology and data to improve urban systems and services while reducing environmental impact. This chapter provides an overview of the concept of sustainable smart cities and its implications for urban development. It explores the key features of sustainable smart cities, including their focus on technology, data and citizen engagement and the challenges they are facing in terms of infrastructure, data management, social equity, environmental sustainability, governance and regulations. The chapter also highlights the implications of sustainable smart cities for urban planners, policymakers and other stakeholders, emphasising the need for collaborative approaches that engage citizens and stakeholders in the design and implementation of smart city initiatives.

In this study, experimental studies were carried out using different process parameters of the soft pneumatic gripper (SPG) fabricated by the fused deposition modeling method. In the experimental studies, the surface quality of the gripper was examined by determining four different levels and factors. The experiment was designed to estimate the surface roughness of the SPG.

The methodology consists of an experimental phase in which the SPG is fabricated and the surface roughness is measured. Thermoplastic polyurethane (TPU) flex filament material was used in the fabrication of SPG. The control factors used in the Taguchi L16 vertical array experimental design and their level values were determined. Analysis of variance (ANOVA) was performed to observe the effect of printing parameters on the surface quality. Finally, regression analysis was applied to mathematically model the surface roughness values obtained from the experimental measurements.

Based on the Taguchi signal-to-noise ratio and ANOVA, layer height is the most influential parameter for surface roughness. The best surface quality value was obtained with a surface roughness value of 18.752 µm using the combination of 100 µm layer height, 2 mm wall thickness, 200 °C nozzle temperature and 120 mm/s printing speed. The developed model predicted the surface roughness of SPG with 95% confidence intervals.

It is essential to examine the surface quality of parts fabricated in additive manufacturing using different variables. In the literature, surface roughness has been examined using different factors and levels. However, the surface roughness of a soft gripper fabricated with TPU material has not been examined previously. The surface quality of parts fabricated using flexible materials is very important.

Investors are called to be good stewards/trustees of their investments, often on behalf of third parties. In light of this fiduciary responsibility, and the conundrum of public criticism potentially impacting on share price, this paper aims to use the basis of the UK governance code to explore what important dialogue investors really have with their holdings to support good governance.

Semi-structured telephone interviews with eight institutional investors explore governance issues and investor company dialogue, giving insights into the aspects of the importance of their part in the UK corporate governance code.

Rather than being sleeping lions, investors positively engage with companies, with regular communication being high on their agenda and not always via the annual general meeting. There is a preference to engage directly with the company rather than in public view or via share dumptin. Thus, we often do not see their actions around their fiduciary duties as often they avoid public criticism or any visibility that could do reputational harm and decrease company value.

This dialogue was just before the point of the exposure of the financial crisis; however, it shows the importance that investors give to taking their responsibilities seriously. Importantly, it provides a springboard for further debate following the financial crises and the updates of the financial environment.

Even though policy seeks engagement, the nuances of the investor dialogue are under explored compared to visible quantitative metrics. This dialogue assures that investors are active, even if their engagement is not public and can be deemed as hidden.

Complementing quantitative studies, this paper explores a qualitative approach, uniquely sharing insights into a hidden and little explored world of fiduciary dialogue.

Federation analytics approaches are a present area of study that has already progressed beyond the analysis of metrics and counts. It is possible to acquire aggregated information about on-device data by training machine learning models using federated learning techniques without any of the raw data ever having to leave the devices in the issue. Web browser forensics research has been focused on individual Web browsers or architectural analysis of specific log files rather than on broad topics. This paper aims to propose major tools used for Web browser analysis.

Each kind of Web browser has its own unique set of features. This allows the user to choose their preferred browsers or to check out many browsers at once. If a forensic examiner has access to just one Web browser's log files, he/she makes it difficult to determine which sites a person has visited. The agent must thus be capable of analyzing all currently available Web browsers on a single workstation and doing an integrated study of various Web browsers.

Federated learning has emerged as a training paradigm in such settings. Web browser forensics research in general has focused on certain browsers or the computational modeling of specific log files. Internet users engage in a wide range of activities using an internet browser, such as searching for information and sending e-mails.

It is also essential that the investigator have access to user activity when conducting an inquiry. This data, which may be used to assess information retrieval activities, is very critical. In this paper, the authors purposed a major tool used for Web browser analysis. This study's proposed algorithm is capable of protecting data privacy effectively in real-world experiments.

The purpose of this paper is to determine the role of service quality (SQ), trust and commitment to customer loyalty (CL) for telecom service users. Further, the moderating role of gender, marital status and connection type within the model was tested.

A measurement model was created based on valid 615 responses from Indian TSUs for SQ, trust, commitment and loyalty with the help of partial least squares structural equation modeling (PLS-SEM). Multi-group analysis (MGA) was conducted to understand the moderating effect of marital status, gender and connection type within the model.

The results suggest that, out of five dimensions of SQ, only responsiveness, assurance and empathy have a significant positive relationship with both commitment and trust. Tangibility has a significant positive relationship with trust only. Both commitment and trust have a significant impact on loyalty. It was noticed that both commitment and trust act as mediators between three SQ dimensions (assurance, empathy and responsiveness) and CL. MGA revealed that empathy and responsiveness positively induce trust in telecom users who are single. Whereas, assurance increases commitment toward telecom service providers in married users. Assurance and empathy significantly contribute toward commitment and trust, respectively, in male users as compared to females. Empathy was found important for postpaid users for trust-building, whereas trust was found to be more important for prepaid users to stay loyal to the service provider.

This article contributes toward understanding the role of SQ, trust and commitment to CL moderated by marital status, gender and connection type in an integrated model concerning telecom service.

The purpose of this paper is to explore the relationship between product innovativeness and the process of technology switching. This issue is important for two reasons: (1) in mature markets, the only way to increase market share is through consumers' switching from competitor firms and (2) it is essential to determine whether the product innovation strategy can meet users' needs in high-technology markets.

Research centers (university hospitals) specializing in magnetic resonance imaging (MRI) are the lead users of the MRI market. In this market, the technology switching process was tracked using an annual conference database. Interviews with industry experts and lead users were conducted in order to determine the relationship between product innovativeness and technology switching.

The findings reveal that in the lead users' segment, technology switching is occurring at a significant level. The interviews emphasized the influence of product innovativeness on technology switching in the global MRI market, as well as the importance of adopting an open innovation process as a strategy to enhance product innovativeness.

The results can be generalized to industries with similar characteristics, such as high rates of technological change and technology heterogeneity. In high-technology markets, managers should monitor switching behavior. They should also study the influence of product innovativeness on such behavior in order to determine the correct product innovation strategy and meet users' preferences effectively.

The literature reports considerable research that investigates switching behavior, but most publications use data from a short time period and cover a limited geographical region. This is the first study that uses data to track the switching behavior of high-technology products on a global scale over a 22-year period.