Search results

1 – 10 of 57
Article
Publication date: 9 February 2023

Vipin Gupta, Rajesh Kumar, Rajneesh Kumar and M.S. Barak

This paper aims to study the energy ratios of plane waves on an interface of nonlocal thermoelastic halfspace (NTS) and nonlocal orthotropic piezothermoelastic half-space (NOPS).

Abstract

Purpose

This paper aims to study the energy ratios of plane waves on an interface of nonlocal thermoelastic halfspace (NTS) and nonlocal orthotropic piezothermoelastic half-space (NOPS).

Design/methodology/approach

The memory-dependent derivatives (MDDs) approach with a hyperbolic two-temperature (HTT), three-phase lag theory is used here to study how the energy ratios change at the interface with the angle of incidence.

Findings

Plane waves that travel through NTS and hit the interface as a longitudinal wave, a thermal wave, or a transversal wave send four waves into the NOPS medium and three waves back into the NTS medium. The amplitude ratios of the different waves that are reflected and transmitted are used to calculate the energy ratios of the waves. It is observed that these ratios are affected by the HTT, nonlocal and MDD parameters.

Research limitations/implications

The energy ratios correspond to four distinct models; nonlocal HTT with memory, nonlocal HTT without memory, local HTT with memory and nonlocal classical-two-temperature with memory concerning the angle of incidence from 0 degree to 90 degree.

Practical implications

This model applies to several fields, including earthquake engineering, soil dynamics, high-energy particle physics, nuclear fusion, aeronautics and other fields where nonlocality, MDD and conductive temperature play an important role.

Originality/value

The authors produced the submitted document entirely on their initiative, with equal contributions from all of them.

Details

International Journal of Numerical Methods for Heat & Fluid Flow, vol. 33 no. 6
Type: Research Article
ISSN: 0961-5539

Keywords

Article
Publication date: 12 August 2021

Pooja Rani, Rajneesh Kumar and Anurag Jain

Decision support systems developed using machine learning classifiers have become a valuable tool in predicting various diseases. However, the performance of these systems is…

Abstract

Purpose

Decision support systems developed using machine learning classifiers have become a valuable tool in predicting various diseases. However, the performance of these systems is adversely affected by the missing values in medical datasets. Imputation methods are used to predict these missing values. In this paper, a new imputation method called hybrid imputation optimized by the classifier (HIOC) is proposed to predict missing values efficiently.

Design/methodology/approach

The proposed HIOC is developed by using a classifier to combine multivariate imputation by chained equations (MICE), K nearest neighbor (KNN), mean and mode imputation methods in an optimum way. Performance of HIOC has been compared to MICE, KNN, and mean and mode methods. Four classifiers support vector machine (SVM), naive Bayes (NB), random forest (RF) and decision tree (DT) have been used to evaluate the performance of imputation methods.

Findings

The results show that HIOC performed efficiently even with a high rate of missing values. It had reduced root mean square error (RMSE) up to 17.32% in the heart disease dataset and 34.73% in the breast cancer dataset. Correct prediction of missing values improved the accuracy of the classifiers in predicting diseases. It increased classification accuracy up to 18.61% in the heart disease dataset and 6.20% in the breast cancer dataset.

Originality/value

The proposed HIOC is a new hybrid imputation method that can efficiently predict missing values in any medical dataset.

Details

International Journal of Intelligent Computing and Cybernetics, vol. 14 no. 4
Type: Research Article
ISSN: 1756-378X

Keywords

Article
Publication date: 14 November 2016

Rajneesh Kumar and Shaloo Devi

The purpose of this paper is to deal with the study of plane waves and fundamental solution in a modified couple stress generalized thermoelastic solid with three-phase-lag (TPL…

Abstract

Purpose

The purpose of this paper is to deal with the study of plane waves and fundamental solution in a modified couple stress generalized thermoelastic solid with three-phase-lag (TPL) model of thermoelasticity.

Design/methodology/approach

It is found that for two-dimensional model, there exists two longitudinal waves, namely, longitudinal wave (P-wave), thermal wave (T-wave), and a set of coupled transverse waves (SV1 and SV2 waves). In addition, the fundamental solution for the system of differential equations for steady oscillations in terms of elementary functions has been constructed. Some properties of fundamental solution are also established. Various particular cases of interest are also deduced from the present investigations and compared with the known results.

Findings

The phase velocity, attenuation coefficient, specific loss and penetration depth are computed numerically and presented graphically to see the effect of TPL model, dual-phase-lag (DPL) model and GN-III model in the presence of couple stress parameter.

Originality/value

The results are compared with couple stress TPL model, couple stress DPL model and GN-III model.

Details

Multidiscipline Modeling in Materials and Structures, vol. 12 no. 4
Type: Research Article
ISSN: 1573-6105

Keywords

Article
Publication date: 14 August 2017

Rajneesh Kumar, Aseem Miglani and Rekha Rani

The purpose of this paper is to study the axisymmetric problem in a micropolar porous thermoelastic circular plate with dual phase lag model by employing eigenvalue approach…

Abstract

Purpose

The purpose of this paper is to study the axisymmetric problem in a micropolar porous thermoelastic circular plate with dual phase lag model by employing eigenvalue approach subjected to thermomechanical sources.

Design/methodology/approach

The Laplace and Hankel transforms are employed to obtain the expressions for displacements, microrotation, volume fraction field, temperature distribution and stresses in the transformed domain. A numerical inversion technique has been carried out to obtain the resulting quantities in the physical domain. Effect of porosity and phase lag on the resulting quantities has been presented graphically. The results obtained for Lord Shulman theory (L-S, 1967) and coupled theory of thermoelasticity are presented as the particular cases.

Findings

The variation of temperature distribution is similar for micropolar thermoelastic with dual (MTD) phase lag model and coupled theory of thermoelasticity. The variation is also similar for tangential couple stress for MTD and L-S theory but opposite to couple theory. The behavior of volume fraction field and tangential couple stress for L-S theory and coupled theory are observed opposite. The values of all the resulting quantities are close to each other away from the sources. The variation in tangential stress, tangential couple stress and temperature distribution is more uniform.

Originality/value

The results are original and new because the authors presented an eigenvalue approach for two dimensional problem of micropolar porous thermoelastic circular plate with dual phase lag model. A comparison of porosity, L-S theory and coupled theory of micropolar thermoelasticity is made. Such problem has applications in material science, industries and earthquake problems.

Details

Multidiscipline Modeling in Materials and Structures, vol. 13 no. 2
Type: Research Article
ISSN: 1573-6105

Keywords

Article
Publication date: 7 November 2017

Rajneesh Kumar, Priyanka Kaushal and Rajni Sharma

The purpose of this paper is to investigate a two dimensional problem of micropolar porous thermoelastic circular plate subjected to ramp type heating.

Abstract

Purpose

The purpose of this paper is to investigate a two dimensional problem of micropolar porous thermoelastic circular plate subjected to ramp type heating.

Design/methodology/approach

Three phase lag theory of thermoelasticity has been used to formulate the problem. A numerical inversion technique is applied to obtain the result in the physical domain. The numerical values of the resulting quantities are presented graphically to show the effect of porosity and dual phase lag model. Some particular cases are also presented.

Findings

The Laplace and Hankel transforms are employed followed by the eigen value approach to obtain the components of displacements, microrotation, volume fraction field, temperature distribution and stresses in the transformed domain.

Originality/value

This paper fulfils the need to study the two-dimensional problem of micropolar porous thermoelastic circular plate subjected to ramp type heating.

Details

Multidiscipline Modeling in Materials and Structures, vol. 13 no. 4
Type: Research Article
ISSN: 1573-6105

Keywords

Article
Publication date: 15 March 2023

M.S. Barak, Rajesh Kumar, Rajneesh Kumar and Vipin Gupta

This paper aims to study the energy ratios of plane waves on an imperfect interface of elastic half-space (EHS) and orthotropic piezothermoelastic half-space (OPHS).

Abstract

Purpose

This paper aims to study the energy ratios of plane waves on an imperfect interface of elastic half-space (EHS) and orthotropic piezothermoelastic half-space (OPHS).

Design/methodology/approach

The dual-phase lag (DPL) theory with memory-dependent derivatives is employed to study the variation of energy ratios at the imperfect interface.

Findings

A plane longitudinal wave (P) or transversal wave (SV) propagates through EHS and strikes at the interface. As a result, two waves are reflected, and four waves are transmitted, as shown in Figure 2. The amplitude ratios are determined by imperfect boundaries having normal stiffness and transverse stiffness. The variation of energy ratios is computed numerically for a particular model of graphite (EHS)/cadmium selenide (OPHS) and depicted graphically against the angle of incidence to consider the effect of stiffness parameters, memory and kernel functions.

Research limitations/implications

The energy distribution of incident P or SV waves among various reflected and transmitted waves, as well as the interaction of waves for imperfect interface (IIF), normal stiffness interface (NSIF), transverse stiffness interface (TSIF), and welded contact interface (WCIF), are important factors to consider when studying seismic wave behavior.

Practical implications

The present model may be used in various disciplines, such as high-energy particle physics, earthquake engineering, nuclear fusion, aeronautics, soil dynamics and other areas where memory-dependent derivative and phase delays are significant.

Originality/value

In a variety of technical and geophysical scenarios, wave propagation in an elastic/piezothermoelastic medium with varying magnetic fields, initial stress, temperature, porosity, etc., gives important information regarding the presence of new and modified waves.

Details

Multidiscipline Modeling in Materials and Structures, vol. 19 no. 3
Type: Research Article
ISSN: 1573-6105

Keywords

Article
Publication date: 18 September 2017

Rajneesh Kumar and Shaloo Devi

The purpose of this paper is to investigate the thermoelastic functionally graded beam in a modified couple stress theory subjected to a dual-phase-lag model.

Abstract

Purpose

The purpose of this paper is to investigate the thermoelastic functionally graded beam in a modified couple stress theory subjected to a dual-phase-lag model.

Design/methodology/approach

The governing equations are solved by using the Euler-Bernoulli beam assumption and the Laplace transform technique. The lateral deflection, temperature change, displacement component, axial stress and thermal moment of the beam are obtained by ramp type heating in the transformed domain. A general algorithm of the inverse Laplace transform is developed to recover the results in a physical domain.

Findings

The lateral deflection, temperature change, displacement component, axial stress and thermal moment of the beam are computed numerically and presented graphically to show the effect of ramp time parameter and phase lags of heating.

Originality/value

Comparisons are made in the absence and presence of coupled dual-phase-lag thermoelastic and coupled thermoelastic L-S theories and also different values of ramp type parameter.

Details

Multidiscipline Modeling in Materials and Structures, vol. 13 no. 3
Type: Research Article
ISSN: 1573-6105

Keywords

Article
Publication date: 10 August 2023

Rajneesh Kumar and Pradeep Kumar Jha

The purpose of this study is to explore how a time-varying electromagnetic stirring (EMS) affects the fluid flow and solidification behavior in a slab caster continuous casting…

Abstract

Purpose

The purpose of this study is to explore how a time-varying electromagnetic stirring (EMS) affects the fluid flow and solidification behavior in a slab caster continuous casting mold. Further, the study of inclusion movements in the mold is carried out under the effect of a time-varying electromagnetic field.

Design/methodology/approach

A three-dimensional coupled numerical model of solidification and magnetohydrodynamics has been developed for slab caster mold to investigate the inclusions transport by discrete phase model with the use of user-defined functions. Enthalpy porosity and the Lagrangian approach are applied to analyze the behavior of solidification and inclusion.

Findings

The study shows that the magnetic field density distribution has a radial symmetry in relation to the stirrer’s center. As the EMS current intensity increases, the strength of the lower recirculation zone gradually decreases and nearly disappears at higher intensities. Additionally, the area of localized remelting zone expands in the solidification front with rising current intensity. The morphology of inclusions and EMS current intensity have a significant impact on the behavior and movement of inclusions within the molten steel.

Practical implications

By using the model, one can optimize the EMS parameter to enhance the quality of steel casting through the elimination of impurities and by improving the microstructure of cast that mainly depend on solidification and flow patterns of molten steel.

Originality/value

Until now, the use of time-varying EMS in the slab caster mold to study solidification and inclusion behavior has not been explored.

Details

International Journal of Numerical Methods for Heat & Fluid Flow, vol. 33 no. 11
Type: Research Article
ISSN: 0961-5539

Keywords

Article
Publication date: 3 November 2022

Rajneesh Kumar and Pradeep Kumar Jha

The purpose of this article is to numerically investigate the effect of casting speed on the fluid flow, solidification and inclusion motion under the influence of electromagnetic…

Abstract

Purpose

The purpose of this article is to numerically investigate the effect of casting speed on the fluid flow, solidification and inclusion motion under the influence of electromagnetic stirring (EMS) in the bloom caster mold with bifurcated submerged entry nozzle (SEN).

Design/methodology/approach

The electromagnetic field obtained by solving Maxwell’s equation is coupled with the fluid flow, solidification and discrete phase model using the in-house user-defined functions. An enthalpy porosity approach and Lagrangian approach are applied for the solidification analysis and non-metallic inclusions motion tracking, respectively.

Findings

Investigation shows that the casting speed and EMS significantly affect the steel flow, solidification and inclusion behavior inside the mold. Investigations are being conducted into the complex interplay between the induced flow and the SEN’s inertial impinging jet. In low and medium casting speeds, the application of EMS significantly increases the inclusion removal rate. Inclusion removal is studied for its different size and density and further effect of EMS is also reported on cluster formation and distribution of inclusion in the domain.

Practical implications

The model may be used to optimize the process parameter (casting speed and EMS) to improve the casting quality of steel by removing the impurities.

Originality/value

The effect of casting speed on the solidification and inclusion behavior under the influence of time-varying EMS in bloom caster mold with bifurcated nozzle has not been investigated yet. The findings may assist the steelmakers in improving the casting quality.

Details

International Journal of Numerical Methods for Heat & Fluid Flow, vol. 33 no. 3
Type: Research Article
ISSN: 0961-5539

Keywords

Article
Publication date: 2 August 2021

Mayur Pratap Singh, Pavan Kumar Meena, Kanwer Singh Arora, Rajneesh Kumar and Dinesh Kumar Shukla

This paper aims to measure peak temperatures and cooling rates for distinct locations of thermocouples in the butt weld joint of mild steel plates. For experimental measurement of…

Abstract

Purpose

This paper aims to measure peak temperatures and cooling rates for distinct locations of thermocouples in the butt weld joint of mild steel plates. For experimental measurement of peak temperatures, K-type thermocouples coupled with a data acquisition system were used at predetermined locations. Thereafter, Rosenthal’s analytical models for thin two-dimensional (2D) and thick three-dimensional (3D) plates were adopted to predict peak temperatures for different thermocouple positions. A finite element model (FEM) based on an advanced prescribed temperature approach was adopted to predict time-temperature history for predetermined locations of thermocouples.

Design/methodology/approach

Comparing experimental and Rosenthal analytical models (2D and 3D) findings show that predicted and measured peak temperatures are in close agreement, while cooling rates predicted by analytical models (2D, 3D) show significant variation from measured values. On the other hand, 3D FEM simulation predicted peak temperatures and cooling rates for different thermocouple positions are close to experimental findings.

Findings

The inclusion of filler metal during simulation of welding rightly replicates the real welding situation and improves outcomes of the analysis.

Originality/value

The present study is an original contribution to the field of welding technology.

1 – 10 of 57