Search results

This chapter presented radio frequency identification (RFID) as a technological gadget used in various industries to improve information and tracking equipment. The adoption of RFID in the construction industry has been scarcely used due to the dissemination of its potential to construction professionals in the industry. RFID is generally used as a wireless device that transmits information using radio waves. The benefits associated with using RFID in the construction industry were discussed along with challenges, and its functions to the construction process.

This study aims to explore the critical application areas of radio frequency identification (RFID) technology for sustainable buildings.

The quantitative research approach was adopted through a structured questionnaire administered to relevant stakeholders of construction projects. The data collected were analysed with the exploratory factor analysis, relative importance index (RII) and fuzzy synthetic evaluation (FSE).

The study’s results have categorised the crucial areas of application where construction industry stakeholders should focus their attention. These areas are divided into four categories: management technologies, production technologies, sensing technologies and monitoring technologies. The findings from the FSE indicate that monitoring technologies represent the most significant category, whereas management technologies rank as the least significant. Moreover, the RII analysis highlights that tools management stands out as the most important application of RFID, while dispute resolution emerges as the least significant RFID application.

The study establishes the core areas of RFID application and their benefits to sustainable buildings. Consequently, it helps stakeholders (consultants, clients and contractors) to examine the RFID application areas and make informed decision on sustainable construction. Furthermore, it provides systematic proof that can aid the implementation of RFID in developing countries.

The study provides an insight into the possible application areas and benefits of RFID technology in the construction industry of developing countries. It also developed a conceptual frame for the critical application areas of RFID technology in the construction industry of developing countries.

The purpose of the research has been the primary consideration and evaluation of a cost effective, reliable, robust and simple process of radio frequency identification (RFID)-based stock control, asset management and monitoring of concrete safety bollards used in the road environment. Likewise, the consideration of the use of the same system and technology to other items in and around the general road infrastructure.

The research approach undertaken has been an evaluation of the use of currently available RFID technology, with a key emphasis on low cost, ease of use, reliability and convenience. Practical field exercises completed in considering the relevant RFID tags and readers and associated software and apps and necessary software integration and development have been undertaken. At the same time, evaluating the specific limits created in the specific environment is being applied. Of particular interest has been the use of a moving scan in a vehicle drive-through or pass-bye, type reading system. This has been determined to be viable and completely practical, drastically reducing the key issue of time-taken. Practical application of the system from idea to real life application has been undertaken. The integration of the use of the RFID tag and reader system with necessary and related software to database upload and storage has been established. The creation of an online facility to allow the appropriate use of the data and to include the convenient output of an asset report has been undertaken.

The findings have provided the necessary insight confirming the use of RFID technology as a simple yet reliable, cost effective and adaptable stock control, asset management and geo-locating system in the road environment. The use of such systems in this particular environment is in its infancy, and is perhaps novel and original in the specific aspect of using the system to stock control, manage and monitor road safety concrete bollards and other roadside objects in the road environment.

To establish if in fact, stock control geo-locating can be reliably undertaken with the use of RFID tags and readers in the specific road and road construction environment, particularly with the use of moving RFID reading of passive tags. To establish the minimum requirements of a field usable RFID tag and reader, specifically applicable to the concrete safety bollards, however to other roadside furniture. To identify the minimum requirements of a function, simple app to minimise general requirements of the overall stock control and monitoring of the RFID-tagged objects. To establish the possibility of reading the tag data, global positioning system (GPS) location and video imaging footage as a single operation function. To determine the basic parameters or limits of the GPS geo-locating, on the proposed products selected and overall system. To determine the current best practice in respect of reasonable accuracy and detail in relation to price considerations to a fully function stock control and monitoring system. To identify the minimum requirements of an online database to receive, house and provide ongoing access to and report on the data. To identify the key differences and benefits between traditional stock control and monitoring systems, against that of proposed RFID tag, read and geo-locating system.

In the aftermath of disasters, humanitarian actors need to coordinate their activities based on accurate information about the disaster site, its surrounding environment, the victims and survivors and the supply of and demand for relief supplies. In this study, the authors examine the characteristics of radio frequency identification (RFID) technology and those of disaster relief operations to achieve information visibility and actor coordination for effective and efficient humanitarian relief operations.

Building on the contingent resource-based view (CRBV), the authors present a model of task-technology fit (TTF) that explains how the use of RFID can improve visibility and coordination. Survey data were collected from humanitarian practitioners in India, and partial least squares (PLS) analysis was used to analyze the model.

The characteristics of both RFID technology and disaster relief operations significantly influence TTF, and TTF predicts RFID usage in disaster relief operations, providing visibility and coordination. TTF is also a mediator between the characteristics of RFID technology and disaster relief operations and between visibility and coordination.

The many recent humanitarian disasters have demonstrated the critical importance of effective and efficient humanitarian supply chain and logistics strategies and operations in assisting disaster-affected populations. The active and appropriate use of technology, including RFID, can help make disaster response more effective and efficient.

Humanitarian actors value RFID technology because of its ability to improve the visibility and coordination of relief operations. This study brings a new perspective to the benefits of RFID technology and sheds light on its antecedents. The study thus expands the understanding of technology in humanitarian operations.

Tracking physical resources at the construction site can generate information to support effective decision-making and building production control. However, the methods for conventional tracking usually offer low reliability. This study aims to propose the integrated Smart Twins 4.0 to track and manage metallic formworks used in cast-in-place concrete wall systems using internet of things (IoT) (operationalized by radio frequency identification [RFID]) and building information modeling (BIM), focusing on increasing quality and productivity.

Design science research is the research approach, including an exploratory study to map the constructive system, the integrated system development, an on-site pilot implementation in a residential project and a performance evaluation based on acquired data and the perception of the project’s production team.

In all rounds of requests, Smart Twins 4.0 registered and presented the status from the formworks and the work progress of buildings in complete correspondence with the physical progress providing information to support decision-making during operation. Moreover, analyses of the system infrastructure and implementation details can drive researchers regarding future IoT and BIM implementation in real construction sites.

The primary contribution is the system proposal, centralized into a mobile app that contains a Web-based virtual model to receive data in real time during construction phases and solve a real problem. The paper describes Smart Twins 4.0 development and its requirements for tracking physical resources considering theoretical and practical previous research regarding RFID, IoT and BIM.

As an emerging technology, Radio Frequency IDentification (RFID) and blockchain have the potential to disrupt many areas of business and social structure. However, it is loaded with significant technical, social, legal, financial and ethical complications that bring difficulty in its widespread use within the public distribution system (PDS). This research aims to analyze the barriers to integrated RFID and blockchain adoption in developing countries' PDS. Furthermore, this study also aims to validate the proposed framework against the Indian PDS.

The proposed framework consists of 10 potential barriers to integrated RFID and blockchain adoption. To identify the barriers, this study referred to the extant literature followed by consultations with domain experts. This study prepared the DEMATEL-based questionnaires, collected the data from four domain experts and analyzed them using an integrated Grey-DEMATEL approach.

The obtained results provide a precise list of barriers and the correlations among them. From the results, it is concluded that the unavailability of a skilled workforce at affordable cost, lack of knowledge about privacy level and unclear return on investment and benefits are the most critical blockchain adoption barriers in the context of Indian PDS.

This research proposes a framework consisting of 10 integrated RFID and blockchain adoption barriers in relation to Indian PDS. It also proposes a method for analyzing causal interrelationships between the barriers while allowing for data input from domain experts. Consequently, the framework is capable of coping with experts' biases and data scarcity.

A real-time production scheduling method for semiconductor back-end manufacturing process becomes increasingly important in industry 4.0. Semiconductor back-end manufacturing process is always accompanied by order splitting and merging; besides, in each stage of the process, there are always multiple machine groups that have different production capabilities and capacities. This paper studies a multi-agent based scheduling architecture for the radio frequency identification (RFID)-enabled semiconductor back-end shopfloor, which integrates not only manufacturing resources but also human factors.

The architecture includes a task management (TM) agent, a staff instruction (SI) agent, a task scheduling (TS) agent, an information management center (IMC), machine group (MG) agent and a production monitoring (PM) agent. Then, based on the architecture, the authors developed a scheduling method consisting of capability & capacity planning and machine configuration modules in the TS agent.

The authors used greedy policy to assign each order to the appropriate machine groups based on the real-time utilization ration of each MG in the capability & capacity (C&C) planning module, and used a partial swarm optimization (PSO) algorithm to schedule each splitting job to the identified machine based on the C&C planning results. At last, we conducted a case study to demonstrate the proposed multi-agent based real-time production scheduling models and methods.

This paper proposes a multi-agent based real-time scheduling framework for semiconductor back-end industry. A C&C planning and a machine configuration algorithm are developed, respectively. The paper provides a feasible solution for semiconductor back-end manufacturing process to realize real-time scheduling.

This study examines academic librarians' perceptions and attitudes toward Internet of Things (IoT) applications in Hong Kong academic libraries and the problems and possible improvements in using IoT technologies to strengthen library services.

This qualitative research used video conferencing software for semi-structured, one-on-one interviews. Participants were given introductory material about the IoT and asked to complete an interview. The data were analyzed using inductive theme clustering for this study.

The analysis identified three themes: perception about applying IoT technology to the library, problems and improvements in using IoT. Participants were generally optimistic about the potential benefits of IoT for improving library operations and providing personalized services. However, they also expressed concerns about privacy and security, errors and extra efforts for information literacy training. They suggested improvements such as incorporating facial recognition technology, advanced RFID technology and collections identification technology to enhance user experience.

Most studies examined users' views rather than librarians' on IoT applications, which few studies cover, especially in East Asia.

The fourth industrial revolution and digital transformation have caused paradigm changes in the procedures of goods production and services through disruptive technologies, and they have formed new methods for business models. Health and medicine fields have been under the effect of these technology advancements. The concept of smart hospital is formed according to these technological transformations. The aim of this research, other than explanation of smart hospital components, is to present a model for evaluating a hospital readiness for becoming a smart hospital.

This research is an applied one, and has been carried out in three phases and according to design science research. Based on the previous studies, in the first phase, the components and technologies effecting a smart hospital are recognized. In the second phase, the extracted components are prioritized using type-2 fuzzy analytic hierarchical process based on the opinion of experts; later, the readiness model is designed. In the third phase, the presented model would be tested in a hospital.

The research results showed that the technologies of internet of things, robotics, artificial intelligence, radio-frequency identification as well as augmented and virtual reality had the most prominence in a smart hospital.

The innovation and originality of the forthcoming research is to explain the concept of smart hospital, to rank its components and to provide a model for evaluating the readiness of smart hospital. Contribution of this research in terms of theory explains the concept of smart hospital and in terms of application presents a model for assessing the readiness of smart hospitals.

Earned value management (EVM)–based models for estimating project actual duration (AD) and cost at completion using various methods are continuously developed to improve the accuracy and actualization of predicted values. This study primarily aimed to examine natural gradient boosting (NGBoost-2020) with the classification and regression trees (CART) base model (base learner). To the best of the authors' knowledge, this concept has never been applied to EVM AD forecasting problem. Consequently, the authors compared this method to the single K-nearest neighbor (KNN) method, the ensemble method of extreme gradient boosting (XGBoost-2016) with the CART base model and the optimal equation of EVM, the earned schedule (ES) equation with the performance factor equal to 1 (ES1). The paper also sought to determine the extent to which the World Bank's two legal factors affect countries and how the two legal causes of delay (related to institutional flaws) influence AD prediction models.

In this paper, data from 30 construction projects of various building types in Iran, Pakistan, India, Turkey, Malaysia and Nigeria (due to the high number of delayed projects and the detrimental effects of these delays in these countries) were used to develop three models. The target variable of the models was a dimensionless output, the ratio of estimated duration to completion (ETC(t)) to planned duration (PD). Furthermore, 426 tracking periods were used to build the three models, with 353 samples and 23 projects in the training set, 73 patterns (17% of the total) and six projects (21% of the total) in the testing set. Furthermore, 17 dimensionless input variables were used, including ten variables based on the main variables and performance indices of EVM and several other variables detailed in the study. The three models were subsequently created using Python and several GitHub-hosted codes.

For the testing set of the optimal model (NGBoost), the better percentage mean (better%) of the prediction error (based on projects with a lower error percentage) of the NGBoost compared to two KNN and ES1 single models, as well as the total mean absolute percentage error (MAPE) and mean lags (MeLa) (indicating model stability) were 100, 83.33, 5.62 and 3.17%, respectively. Notably, the total MAPE and MeLa for the NGBoost model testing set, which had ten EVM-based input variables, were 6.74 and 5.20%, respectively. The ensemble artificial intelligence (AI) models exhibited a much lower MAPE than ES1. Additionally, ES1 was less stable in prediction than NGBoost. The possibility of excessive and unusual MAPE and MeLa values occurred only in the two single models. However, on some data sets, ES1 outperformed AI models. NGBoost also outperformed other models, especially single models for most developing countries, and was more accurate than previously presented optimized models. In addition, sensitivity analysis was conducted on the NGBoost predicted outputs of 30 projects using the SHapley Additive exPlanations (SHAP) method. All variables demonstrated an effect on ETC(t)/PD. The results revealed that the most influential input variables in order of importance were actual time (AT) to PD, regulatory quality (RQ), earned duration (ED) to PD, schedule cost index (SCI), planned complete percentage, rule of law (RL), actual complete percentage (ACP) and ETC(t) of the ES optimal equation to PD. The probabilistic hybrid model was selected based on the outputs predicted by the NGBoost and XGBoost models and the MAPE values from three AI models. The 95% prediction interval of the NGBoost–XGBoost model revealed that 96.10 and 98.60% of the actual output values of the testing and training sets are within this interval, respectively.

Due to the use of projects performed in different countries, it was not possible to distribute the questionnaire to the managers and stakeholders of 30 projects in six developing countries. Due to the low number of EVM-based projects in various references, it was unfeasible to utilize other types of projects. Future prospects include evaluating the accuracy and stability of NGBoost for timely and non-fluctuating projects (mostly in developed countries), considering a greater number of legal/institutional variables as input, using legal/institutional/internal/inflation inputs for complex projects with extremely high uncertainty (such as bridge and road construction) and integrating these inputs and NGBoost with new technologies (such as blockchain, radio frequency identification (RFID) systems, building information modeling (BIM) and Internet of things (IoT)).

The legal/intuitive recommendations made to governments are strict control of prices, adequate supervision, removal of additional rules, removal of unfair regulations, clarification of the future trend of a law change, strict monitoring of property rights, simplification of the processes for obtaining permits and elimination of unnecessary changes particularly in developing countries and at the onset of irregular projects with limited information and numerous uncertainties. Furthermore, the managers and stakeholders of this group of projects were informed of the significance of seven construction variables (institutional/legal external risks, internal factors and inflation) at an early stage, using time series (dynamic) models to predict AD, accurate calculation of progress percentage variables, the effectiveness of building type in non-residential projects, regular updating inflation during implementation, effectiveness of employer type in the early stage of public projects in addition to the late stage of private projects, and allocating reserve duration (buffer) in order to respond to institutional/legal risks.

Ensemble methods were optimized in 70% of references. To the authors' knowledge, NGBoost from the set of ensemble methods was not used to estimate construction project duration and delays. NGBoost is an effective method for considering uncertainties in irregular projects and is often implemented in developing countries. Furthermore, AD estimation models do fail to incorporate RQ and RL from the World Bank's worldwide governance indicators (WGI) as risk-based inputs. In addition, the various WGI, EVM and inflation variables are not combined with substantial degrees of delay institutional risks as inputs. Consequently, due to the existence of critical and complex risks in different countries, it is vital to consider legal and institutional factors. This is especially recommended if an in-depth, accurate and reality-based method like SHAP is used for analysis.