Search results

The vibration of the rails is a significant source of railway rolling noise, often forming the dominant component of noise in the important frequency region between 400 and 2000 Hz. The purpose of the paper is to investigate the influence of the ground profile and the presence of the train body on the sound radiation from the rail.

Two-dimensional boundary element calculations are used, in which the rail vibration is the source. The ground profile and various different shapes of train body are introduced in the model, and results are observed in terms of sound power and sound pressure. Comparisons are also made with vibro-acoustic measurements performed with and without a train present.

The sound radiated by the rail in the absence of the train body is strongly attenuated by shielding due to the ballast shoulder. When the train body is present, the sound from the vertical rail motion is reflected back down toward the track where it is partly absorbed by the ballast. Nevertheless, the sound pressure at the trackside is increased by typically 0–5 dB. For the lateral vibration of the rail, the effects are much smaller. Once the sound power is known, the sound pressure with the train present can be approximated reasonably well with simple line source directivities.

Numerical models used to predict the sound radiation from railway rails have generally neglected the influence of the ground profile and reflections from the underside of the train body on the sound power and directivity of the rail. These effects are studied in a systematic way including comparisons with measurements.

The purpose of this paper is to investigate the effect of remelting each layer on the homogeneity of nickel-titanium (NiTi) parts fabricated from elemental nickel and titanium powders using laser powder bed fusion (LPBF). In addition, the influence of manufacturing parameters and different melting strategies, including multiple cycles of remelting, on printability and macro defects, such as pore and crack formation, have been investigated.

An LPBF process was used to manufacture NiTi alloy from elementally blended powders and was evaluated with the use of a remelting scanning strategy to improve the homogeneity of fabricated specimens. Furthermore, both single melt and up to two remeltings were used.

The results indicate that remelting can be beneficial for density improvement as well as chemical and phase composition homogenization. Backscattered electron mode in scanning electron microscope showed a reduction in the presence of unmixed Ni and Ti elemental powders in response to increasing the number of remelts. The microhardness values of NiTi parts for the different numbers of melts studied were similar and ranged from 487 to 495 HV. Nevertheless, it was observed that measurement error decreases as the number of remelts increases, suggesting an increase in chemical and phase composition homogeneity. However, X-ray diffraction analysis revealed the presence of multiple phases regardless of the number of melt runs.

For the first time, to the best of the authors’ knowledge, elementally blended NiTi powders were fabricated via LPBF using remelting scanning strategies.

Adolescents being in a stage of growth need good sleep, but, today, they suffer from sleep deprivation due to such extrinsic factor as a smartphone which they enjoy spending time using the device. However, the effects of smartphone output power (SOP) on the duration of good sleep remains unclear. The purpose of this paper is to investigate the correlation of the SOP and sleep loss in high school students.

The time-series study was conducted among 145 high school students in Chiang Mai Province who completed a sleep diary which applied by the Pittsburg Sleep Quality Index. The SOP was corrected by a smartphone application and transmitted by e-mail to a researcher every day. The completed data set contains 12,969 entries. Headache, anxiety and depression were also assessed. Data were analyzed using the generalized estimating equation adjusted for demographic data, smartphone use and other factors.

Most of the study subjects are female, 17.4 years old on average. The prevalence of sleep loss (<8 h) was 52.9 percent with averagely 7.4 ±1.7 h of sleep duration and poor sleep at 32.1 percent. Anxiety, depression, headache had relationships with sleep loss. The daily dose, evening and nocturnal SOP in the range of ≥ 2.00 × 10^‒5 mW had stronger relationships with sleep loss than their effects in the range of ≤ 1.79 × 10^‒5 mW (OR_adj1.32; 95% CI: 1.26–1.76, OR_adj1.34; 95% CI: 1.07–1.17 and OR_adj1.41; 95% CI: 1.07–1.17, respectively). Meanwhile, morning Lag_2 and daytime Lag_1 in the range of ≥ 2.00 × 10^‒5 mW appeared to have a strong relationship with sleep loss (OR_adj1.60; 95% CI: 1.26–1.76, OR_adj1.36; 95% CI: 1.07–1.17). The relationship between Lag_4 daily dose and sleep loss took the form of a reverse dose-response.

Sleep loss in adolescents has an increasing trend of prevalence and has been found to be correlated with the highest SOP group (≥ 2.00 × 10^‒5 mW range). These results confirmed that increased and longer smartphone use result in reduced sleep time. This causes them to be exposed to smartphone electromagnetic radiation and smartphone screen lighting. This disturbs brain waves and nervous system controlling sleep balance mechanisms. The findings recommended parents setting time and boundaries around technology use at home to reduce contact with electromagnetic radiation and smartphone screen lighting, thereby increasing sleeping time in order to create good sleep quality.