Search results

The purpose of this paper is to identify factors resulting from climate change that could impact the cost-effectiveness and development of viticulture in Poland. Climate change is a crucial challenge for the global wine industry. It has the potential to shift the centre of gravity of viticulture from well-developed regions to new ones, including Poland.

Two main methods of data collection were applied: computer assisted telephone interviewing and computer assisted personal interview. A structured questionnaire was drafted, piloted and sent to farms randomly selected to represent wine producers from different wine regions of Poland. The linear probability model was used to determine the factors influencing cost-effectiveness in viticulture production. Data were calculated by using SAS software.

Current and future climate change factors could influence the cost-effectiveness and growth of viticulture in Poland. The exploitation of these opportunities will require the development and implementation of new policies and practices at the farm level, which could also promote innovation in the sector. Furthermore, wine growers according to the increased risk of the unfavourable abiotic and biotic production conditions would be forced to undertake the adaptation strategies to limit the risk of lowering the cost-effectiveness.

This study identifies viticulture and winemaking opportunities for new regions such as Poland. The challenges involved in managing this transition are discussed.

The electrical properties of piezoelectric vibrators have a crucial influence on the operating state of ultrasonic motors. In order to solve the problem that the current piezoelectric vibrator generates a large amount of heat during vibration to degrade its performance, which in turn affects the normal operation of ultrasonic motors, this paper prepares a novel piezoelectric vibrator and tests its maximum vibration velocity under the working condition, which is more than twice as much as that of the current commercial PZT-8.

The crystal structures of the samples were analyzed by using an X-ray diffractometer. For microstructure observation, samples were observed by scanning electron microscope (SEM). The quasi-static piezoelectric coefficient meter (ZJ-3AN) was used for piezoelectric measurement. Dielectric properties were measured by utilizing an impedance analyzer (Agilent 4294A) with a laboratory heating unit. Ferroelectric hysteresis loops were obtained using a ferroelectric analyzer (Radiant, Multiferroic 100). A Doppler laser vibrometer (Polytec PSV-300F, Germany) and a power amplifier were used for piezoelectric vibration measurements, during which the temperature rise was determined by an infrared radiation thermometer (Victor 303, China).

The ceramics exhibit enhanced piezoelectric performance at 0.1–0.4 mol% of Yb doping contents. The ceramic of 0.4 mol% Yb reaches the maximal internal bias field and presents a larger mechanical quality factor of 1,692 compared with that of 0.2 mol% Yb-doped ceramic, in spite of a slightly decreased dielectric constant of 439 pC/N, the unit of the piezoelectric constant, which is the ratio of the local charge (pC) to the frontal force (N) and electromechanical coupling coefficient of 0.63. The vibrator with this large mechanical quality factor ceramic displays a vibration velocity of up to 0.81 m/s under the constraint of 20 °C temperature rising, which is much higher than commercial high-power piezoelectric ceramics PZT-8.

The enhanced high-power properties of the piezoelectric vibrator by Yb doping may provide a potential application for the high-performance USM and offer the possibility of long-term stable operation under high power for special equipment like USM. In the subsequent phase of research, the novel PZT-based high-power piezoelectric vibrator can be utilized in the USM, and the motor's performance will be evaluated under aerospace conditions to objectively assess the reliability of the piezoelectric vibrator.

In fire resistance tests (FRTs) of building materials, a crucial criterion to pass the test procedure is to avoid the leakage of the hot flue gases caused by gaps and cracks occurring due to the thermal exposure. The present study's aim is to calculate the deformation of a steel door, which is embedded within a wall made of bricks, and qualitatively determine the flue gas leakage.

A computational fluid dynamics/finite element method (CFD/FEM) coupling was introduced representing an intermediate approach between a one-way and a full two-way coupling methodology, leading to a simplified two-way coupling (STWC). In contrast to a full two way-coupling, the heat transfer through the steel door was simulated based on a one-way approach. Subsequently, the predicted temperatures at the door from the one-way simulation were used in the following CFD/FEM simulation, where the fluid flow inside and outside the furnace as well as the deformation of the door were calculated simultaneously.

The simulation showed large gaps and flue gas leakage above the door lock and at the upper edge of the door, which was in close accordance to the experiment. Furthermore, it was found that STWC predicted similar deformations compared to the one-way coupling.

Since two-way coupling approaches for fluid/structure interaction in fire research are computationally demanding, the number of studies is low. Only a few are dealing with the flue gas exit from rooms due to destruction of solid components. Thus, the present study is the first two-way approach dealing with flue gas leakage due to gap formation.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

The purpose of this paper is to demonstrate the impact of the welding sequence on the substrate plate distortion during the wire and arc additive manufacturing (WAAM) process. This paper also aims to show the capability of finite element simulations in the prediction of those thermally induced distortions.

An experiment was conducted in which solid aluminum blocks were manufactured using two different welding sequences. The distortion of the substrates was measured at predefined positions and converted into bending and torsion values. Subsequently, a weakly coupled thermo-mechanical finite element model was created using the Abaqus simulation software. The model was calibrated and validated with data gathered from the experiments.

The results of this paper showed that the welding sequence of a part significantly affects the formation of thermally induced distortions of the final part. The calibrated simulation model was able to capture the different distortion behavior attributed to the welding sequences.

Within this work, a simulation model was developed capable of predicting the distortion of WAAM parts in advance. The findings of this paper can be used to improve the design of WAAM welding sequences while avoiding high experimental efforts.

The paper seeks to bridge the already familiar benefits of 3D printing (3DP) to the rehabilitation of cultural heritage, still based on the use of complex and expensive handcrafted techniques and scarce materials.

A compilation of different information on frequent anomalies in cultural heritage buildings and commonly used materials is conducted; subsequently, some innovative techniques used in the construction sector (3DP and 3D scanning) are addressed, as well as some case studies related to the rehabilitation of cultural heritage building elements, leading to a reflection on the opportunities and challenges of this application within these types of buildings.

The compilation of information summarised in the paper provided a clear reflection on the great potential of 3DP for cultural heritage rehabilitation, requiring the development of new mixtures (lime mortars, for example) compatible with the existing surface and, eventually, incorporating some residues that may improve interesting properties; the design of different extruders, compatible with the new mixtures developed and the articulation of 3D printers with the available mapping tools (photogrammetry and laser scanning) to reproduce the component as accurately as possible.

This paper sets the path for a new application of 3DP in construction, namely in the field of cultural heritage rehabilitation, by identifying some key opportunities, challenges and for designing the process flow associated with the different technologies involved.

The purpose of this paper is as follows: First, understanding the nature of the relationship between corporate adoption of the concept of societal responsibility [availability of environmental awareness, clear vision of the impact of societal responsibility on financial performance, managers informing employees of the latest developments in societal responsibility programs, managers' response to their corporate social responsibility (CSR) proposals] in the form of an annual report that supports the success of the company's objectives, the company's management encourages employees to participate collectively in societal responsibility programs and to protect the environment from pollution in the petrochemical industry. Second, understand the nature of the relationship between the dimensions of corporate social responsibility concept (cultural, social, economic, ethical and legal) and protect the environment from pollution in the petrochemical industry. Third, the research also seeks to show the role of societal responsibility and its application in the petrochemical companies to protect the environment from pollution in The Governorate of Alexandria – Egypt, and come out with results and recommendations that could help protect the environment from the forms of environmental pollution resulting from the production processes of this industry.

The researcher has relied on each of the following approaches: Case study methodology is a research strategy aimed at solving a problem or facing a particular situation. It is based on preliminary hypotheses through full analysis of all data collected and recorded. Which depends on the study of a limited number of cases or vocabulary in-depth comprehensive study through the study of all or a large number of variables overlapping and interrelated and influential on the problem under consideration. Thus, it provides a deep and rich understanding of what is going on around the research and the processes that are related to it, and not only the external or apparent description of the situation or phenomenon; it cares about the total description and looks at the particles, in relation to the whole. Quantitative approach: by giving a numerical description indicating the size or size of the phenomenon or the degree of association with the phenomenon. Other phenomena. Accordingly, the role of the petrochemical companies in Alexandria Governorate, and the social responsibility programs carried out within the governorate in terms of importance, growth and requirements, and the most important characteristics and constraints and components and methods of work and developments have been described. Thus, the researcher can analyze the relationship between CSR and environmental protection from pollution in Alexandria Governorate.

There is paucity in the studies that dealt with the relationship between CSR and environmental protection against pollution in public organizations. There is agreement among the sample on the importance and feasibility of adopting the concept of social responsibility and placing it at the top of the top management concerns, especially in the field of petrochemical companies. With the need to take concrete implementation measures to support social responsibility programs aimed at serving the community among all stakeholders. The effective implementation of the mechanisms for the implementation of meaningful social responsibility programs requires fundamental changes in management practices, existing organizational structures and the quality of personnel working in the relevant departments, in general, and the social responsibility group, in particular, which may be difficult for political and economic reasons.

Time: The study period was set from 2015 to 2017. Place: The study focuses on the petrochemical companies operating in Alexandria. Humanity: The study focuses on the employees of the petrochemical companies operating in Alexandria Governorate.

The adoption of social responsibility positively affects the protection of the environment from pollution, and this effect shows that the adoption of the concept of corporate social responsibility is influenced by the following factors: increasing the participation of workers with healthy environmental contributions to the productive process; increasing the companies' economic and social activities toward protecting the environment from pollution; increasing the capacity of companies to pay greater costs to preserve the environment; increasing the awareness of green consumers with the products it offers Companies; development of continuous internal work environment companies; and clearly defined strategy followed in social responsibility programs.

The social responsibility of the public organizations derives their strength through, first, the keenness of these organizations to analyze the variables of the ethical dimension of social responsibility and their availability, which will lead the organizations to provide their services with the highest quality and sincerity. That this analysis (ethics of individuals) as training members of the social responsibility team to solve problems using brainstorming and provide employees with official data related to improving work (ethics of leadership), such as the identification of business objectives through the participation of managers with subordinates, and the punishment of workers who exhibit immoral behaviors (ethics of productive processes) as a decision-making process to ethical standards regardless of the costs involved. When there is an immoral behavior and managers are responsible for implementing the changes needed to reach the targeted outcomes), second, promote partnerships with other relevant sectors for community service.

According to the results of the previous studies and the applied study results, the researcher would like to submit a mechanism to the directors and heads of the boards of directors of the Egyptian petrochemical companies under study.

The purpose of this study is to verify how the carbon doping of the WC-Co cemented carbide (CC) affected their structure before their processing by hot isostatic pressing (HIP) technology.

The samples for this experiment were fabricated by selective laser melting technology (SLM) using a YAG fiber laser with a power of P = 40 W and a scanning speed of 83 mm/s. The subsequent carbon doping process was performed in a chamber furnace at 900 0 C for 1, 4 and 12 h. The HIP was performed at 1,390°C and pressures of 40 MPa, 80 MPa and 120 MPa. The changes induced in the structures were evaluated using X-ray diffraction and various microscopic methods.

X-ray diffraction analysis showed that the structure of the samples after SLM consisted of WC, W₂C, Co₄W₂C and Co phases. As a result of the increase in the carbon content in the structure of the samples, the transition carbide W₂C and structural phase Co₄W₂C decayed. Their decay was manifested by the coarsening of the minor alpha phase (WC), which occurred both during the carburizing process and during the subsequent processing using HIP. In the samples in which the structure was carburized prior to HIP, only the structural phases WC and Co were observed in most cases.

The results confirm that it is possible to increase the homogeneity of the CC structure and thus its applicability in practice by additional carburization of the sample structure with subsequent processing by HIP technology.

This study reviews the extent of application of artificial intelligence (AI) tools in the construction industry.

A thorough literature review (based on 165 articles) was conducted using Elsevier's Scopus due to its simplicity and as it encapsulates an extensive variety of databases to identify the literature related to the scope of the present study.

The following items were extracted: type of AI tools used, the major purpose of application, the geographical location where the study was conducted and the distribution of studies in terms of the journals they are published by. Based on the review results, the disciplines the AI tools have been used for were classified into eight major areas, such as geotechnical engineering, project management, energy, hydrology, environment and transportation, while construction materials and structural engineering. ANN has been a widely used tool, while the researchers have also used other AI tools, which shows efforts of exploring other tools for better modelling abilities. There is also clear evidence of that studies are now growing from applying a single AI tool to applying hybrid ones to create a comparison and showcase which tool provides a better result in an apple-to-apple scenario.

The findings can be used, not only by the researchers interested in the application of AI tools in construction, but also by the industry practitioners, who are keen to further understand and explore the applications of AI tools in the field.

There are no studies to date which serves as the center point to learn about the different AI tools available and their level of application in different fields of AEC. The study sheds light on various studies, which have used AI in hybrid/evolutionary systems to develop effective and accurate predictive models, to offer researchers and model developers more tools to choose from.

Healthcare policies around the globe are aimed at achieving patient-centeredness. The patient is understood as a prosumer of healthcare, wherein healthcare service co-production and value co-creation take center stage. The article endeavors to unpack the state of the literature on the innovations promoting the transition toward patient-centeredness, informing policy and management interventions fostering the reconceptualization of the patient as a prosumer of healthcare services.

A hybrid review methodology consisting of a bibliometric-interpretive review following the Scientific Procedures and Rationales for Systematic Literature Reviews (SPAR-4-SLR) protocol is used. The bibliometric component enabled us to objectively map the extant scientific knowledge into research streams, whereas the interpretive component facilitated the critical analysis of research streams.

Patient-centeredness relies on a bundle of innovations that are enacted through a cycle of patients' activation, empowerment, involvement and engagement, wherein the omission of any steps arrests the transition toward service co-production and value co-creation. Institutional, organizational and cognitive barriers should be overcome to boost the transition of patients from consumers to prosumers in a patient-centered model of healthcare.

The article delivers the state of the art of the scientific literature in the field of innovations aimed at sustaining the transition toward patient-centeredness and provides some food for thoughts to scholars and practitioners who wish to push forward service co-production and value co-creation in healthcare.