Search results

Polyurethane (PUR) foam parts are traditionally manufactured using metallic molds, an unsuitable approach for prototyping purposes. Thus, rapid tooling of disposable molds using fused filament fabrication (FFF) with polylactic acid (PLA) and glycol-modified polyethylene terephthalate (PETG) is proposed as an economical, simpler and faster solution compared to traditional metallic molds or three-dimensional (3D) printing with other difficult-to-print thermoplastics, which are prone to shrinkage and delamination (acrylonitrile butadiene styrene, polypropilene-PP) or high-cost due to both material and printing equipment expenses (PEEK, polyamides or polycarbonate-PC). The purpose of this study has been to evaluate the ease of release of PUR foam on these materials in combination with release agents to facilitate the mulding/demoulding process.

PETG, PLA and hardenable polylactic acid (PLA 3D870) have been evaluated as mold materials in combination with aqueous and solvent-based release agents within a full design of experiments by three consecutive molding/demolding cycles.

PLA 3D870 has shown the best demoldability. A mold expressly designed to manufacture a foam cushion has been printed and the prototyping has been successfully achieved. The demolding of the part has been easier using a solvent-based release agent, meanwhile the quality has been better when using a water-based one.

The combination of PLA 3D870 and FFF, along with solvent-free water-based release agents, presents a compelling low-cost and eco-friendly alternative to traditional metallic molds and other 3D printing thermoplastics. This innovative approach serves as a viable option for rapid tooling in PUR foam molding.

AI-based robo-advisory (RA) represents a FinTech application that is already replacing retail investment advisors. In private banking (PB), clients also increasingly expect service provision across different digital channels, but with a higher degree of personalization. Hence, the present study investigates the impact of intelligent RA on the PB investment advisory process to derive both process (re)design knowledge and strategic guidance for artificial intelligence (AI) usage for PB investment advisory.

The present study applies an AI process impact analysis approach by decomposing AI-based RA into three AI application types: conversational agent, customer segmentation and predictive analytics. The analysis results along a reference PB investment advisory process reveal sub-process transformations which are applied for process redesign integrating AI.

The study results imply that AI systems (1) enable seamless client journeys, (2) increase advisor flexibility, (3) support the client–advisor relationship by applying an omnichannel approach and (4) demand advisor skills to be augmented with technical and statistical knowledge.

The research study contributes (1) an AI process impact analysis approach, (2) derives process (re)design knowledge for AI deployment and (3) develops strategic guidance for AI usage in PB investment advisory.

Risks are considered a significant obstacle to Green Building (GB) development and have recently received significant attention from both construction practitioners and academics. This study aimed to identify critical GB risks and explore the relationship between participants' characteristics and risk assessment.

Firstly, a list of GB risks was developed based on a comprehensive literature review and interviewing GB experts. After that, a survey of 207 construction professionals was then conducted to validate these GB risk factors. Finally, this research adopted the ANOVA test and hierarchical regression analysis to examine the relationship between participants' characteristics and risk assessment.

The results provided a list of GB risks classified and evaluated according to the GB project life cycle and, thus, may serve as a helpful reference for GB practitioners. Notably, the ANOVA analysis revealed that risk assessment negatively correlates with participants' GB experience, while their industry experience does not affect risk assessment. Furthermore, the hierarchical regression analysis proved that participant roles do not moderate the association between risk assessment and GB experience.

This study contributed to GB literature by implementing empirical research on GB risks in a developing country. The results implied the essential role of professionals with rich GB experience in risk management in GB projects. Furthermore, this research could help construction practitioners understand GB risks adequately and thereby have better risk-management strategies for future GB projects.

This study aims to investigate the effect of vibration on ceramic tools under dry cutting conditions and find the optimum cutting condition for the hardened steel machining process in a computer numerical control (CNC) lathe machine.

In this research, an integrated fuzzy TOPSIS-based Taguchi L9 optimization model has been applied for the multi-objective optimization (MOO) of the hard-turning responses. Additionally, the effect of vibration on the ceramic tool wear was investigated using Analysis of Variance (ANOVA) and Fast Fourier Transform (FFT).

The optimum cutting conditions for the multi-objective responses were obtained at 98 m/min cutting speed, 0.1 mm/rev feed rate and 0.2 mm depth of cut. According to the ANOVA of the input cutting parameters with respect to response variables, feed rate has the most significant impact (53.79%) on the control of response variables. From the vibration analysis, the feed rate, with a contribution of 34.74%, was shown to be the most significant process parameter influencing excessive vibration and consequent tool wear.

The MOO of response parameters at the optimum cutting parameter settings can significantly improve productivity in the dry turning of hardened steel and control over the input process parameters during machining.

Most studies on optimizing responses in dry hard-turning performed in CNC lathe machines are based on single-objective optimization. Additionally, the effect of vibration on the ceramic tool during MOO of hard-turning has not been studied yet.

This study aims to investigate the role of work–family conflict (WFC) and work engagement (WE) and its influence on role stressors and turnover intention among medical doctors in Malaysian public hospitals. Doctors who experience higher work stress will inevitably experience WFC, consequently triggering their intention to quit.

A total of 202 structured questionnaire responses were collected from medical doctors in four Malaysian public hospitals. The study used partial least squares structural equation modeling (SmartPLS 3.0) for hypotheses testing.

As hypothesized, WFC encourages turnover intention while WE mitigate the relationship between role ambiguity (RA)-TI. RA is also observed to reduce WE, which, in turn, increases the intention to quit. Findings showed that both role conflict and WFC share a positive relationship with TI while WE and TI are negatively related. Furthermore, it was found that WE and WFC are significant mediators in the RA and TI relationship. WFC is also reported to be a significant mediator between the RC and TI relationship.

The causality effects remain limited due to the nature of the cross-sectional design. Future studies should use a longitudinal approach to gauge a better understanding of these relationships.

This study provides insights for policymakers in resolving the increase of turnover issues by providing support and relieving medical doctors’ stress levels. Health directors should be encouraged to focus on the key aspects that may directly affect the well-being of medical doctors and eventually reduced staff turnover.

The study contributes to existing knowledge by measuring variables such as job demand (RS and WFC), personal resources (WE) and job outcomes (TI) in the public health care sector. Additionally, research involving COR theory in Asian countries like Malaysia remains relatively underexplored.

One of the major challenges in the design of thermal equipment is to minimize the entropy production and enhance the thermal dissipation rate for improving energy efficiency of the devices. In several industrial applications, the structure of thermal device is cylindrical shape. In this regard, this paper aims to explore the impact of isothermal cylindrical solid block on nanofluid (Ag – H₂O) convective flow and entropy generation in a cylindrical annular chamber subjected to different thermal conditions. Furthermore, the present study also addresses the structural impact of cylindrical solid block placed at the center of annular domain.

The alternating direction implicit and successive over relaxation techniques are used in the current investigation to solve the coupled partial differential equations. Furthermore, estimation of average Nusselt number and total entropy generation involves integration and is achieved by Simpson and Trapezoidal’s rules, respectively. Mesh independence checks have been carried out to ensure the accuracy of numerical results.

Computations have been performed to analyze the simultaneous multiple influences, such as different thermal conditions, size and aspect ratio of the hot obstacle, Rayleigh number and nanoparticle shape on buoyancy-driven nanoliquid movement, heat dissipation, irreversibility distribution, cup-mixing temperature and performance evaluation criteria in an annular chamber. The computational results reveal that the nanoparticle shape and obstacle size produce conducive situation for increasing system’s thermal efficiency. Furthermore, utilization of nonspherical shaped nanoparticles enhances the heat transfer rate with minimum entropy generation in the enclosure. Also, greater performance evaluation criteria has been noticed for larger obstacle for both uniform and nonuniform heating.

The current numerical investigation can be extended to further explore the thermal performance with different positions of solid obstacle, inclination angles, by applying Lorentz force, internal heat generation and so on numerically or experimentally.

A pioneering numerical investigation on the structural influence of hot solid block on the convective nanofluid flow, energy transport and entropy production in an annular space has been analyzed. The results in the present study are novel, related to various modern industrial applications. These results could be used as a firsthand information for the design engineers to obtain highly efficient thermal systems.

The wide application of metal material extrusion (MEX) has been hampered by the practicalities associated with the resulting shrinkage of the final parts when commercial three-dimensional (3D) printing equipment is used. The shrinkage behaviour of MEX metal parts is a very important aspect of the MEX metal production process, as the parts must be accurately oversized to compensate for shrinkage. This paper aims to investigate the influence of primary 3D printing parameters, namely, print speed, layer height and print angle, on the shrinkage behaviour of MEX Steel 316L parts.

Two groups of dog-bone and rectangular-shape specimens were produced with the BASF Ultrafuse Steel 316L metal filament. The length, width and thickness of the specimens were measured pre- and post-debinding and sintering to calculate the percentile shrinkage rates. Analysis of variance (ANOVA) was used to evaluate and rank the significance of each manufacturing parameter on shrinkage. Typical main print quality issues experienced in this analysis are also reported.

The shrinkage rates of the tested specimens ranged from 15.5 to 20.4% along the length and width axis and 18.5% to 23.1% along the thickness axis of the specimens. Layer height and raster angle were the most statistically significant parameters influencing shrinkage, while print speed had very little influence. Three types of defects were observed, including surface roughness, surface deformation (warping and distortion) and balling defects.

This paper bridges an existing gap in MEX Steel 316L literature, with a focus on the relationship between MEX manufacturing parameters and subsequent shrinkage behaviour. This study provides an in-depth analysis of the relationship between manufacturing parameters – layer height, raster angle and print speed and subsequent shrinkage behaviour, thereby providing further information on the relationship between the former and the latter.

Risks in implementing green building (GB) projects have emerged as a significant obstacle for GB development, especially in developing countries. In recent years, both academics and construction practitioners have paid considerable attention to the risks associated with GB. In this study, the authors aimed to create a comprehensive risk assessment model that considers three crucial risk features: impact level, probability of occurrence and risk manageability.

In the research, authors adopted the mean scoring and fuzzy synthetic evaluation method to assess GB risks. Based on expert assessments, this model can determine the significance of risk factors, risk groups and overall risk. Notably, this research applied the proposed model to assess GB risks in Vietnam by surveying 58 GB experienced professionals.

The findings revealed that GB risks are relatively high in Vietnam, implying that risk management is essential for GB projects to succeed. The results also showed that “lack of experience of GB designers” is the most critical factor, and “human resources risk in the design phase” is the top crucial risk group.

This study contributes a novel and practical model to help practitioners assess risks in GB projects. In addition, this research offers detailed GB risk evaluations in Vietnam and thus could be a valuable reference for construction practitioners and future studies.

Different from manufacturing resources allocation problems, the prices and amounts of limited public service resources could not be changed with the consumers’ requirements and social fairness is the most important objective for improving allocation efficiency. To measure social fairness reasonably, the purpose of this paper is fourfold: first, divide social fairness into longitudinal comparative fairness and crosswise comparative fairness, therefore providing their calculation formula and describing the comprehensive fair degree by using the interval numbers. Second, the comparison regulations of interval numbers are given and the corresponding features are also described. Third, an extension of VIKOR method is put forward for evaluating social fairness of different allocation alternatives with interval numbers. Finally, a numerical example illustrates the proposed method and clarifies the main results developed in the paper.

In this paper, the author depicts the social fair degree as an interval number, and thus proposes the comparison method between any two interval numbers. Based on the basis procedure of the VIKOR method, the paper proposes an extension of the fuzzy VIKOR method with the interval numbers to rank and select the compromise allocation alternatives. Finally, a numerical example illustrates the practicability of the proposed method.

The comparison of interval numbers is very important when the author evaluates the decision alternatives. Through analyzing the present comparison methods, the paper proposes the simple method of comparing the interval numbers, which can obtain the same results with the above two methods. The fuzzy VIKOR method, a popular multi-criteria decision-making method, focusses on ranking and selecting from a set of alternatives in a fuzzy environment. For the fuzzy value, the paper also proposes the extension of the VIKOR method to perform an evaluation and get the compromise alternatives.

According to the huge customers’ requirement, how to improve their social fair degree has become the focus in public service resources allocation, where the social fair degree may be a comprehensive concept which includes the fair degree compared with all the other allocation alternatives and the fair degree compared with the other small group under the same allocation alternative. In the paper, the author defines the above two types of fair degree and then depicts the comprehensive fair degree as their integration, which will be interval numbers.

This study aims to explore the relationship between risk governance characteristics (chief risk officer [CRO], chief financial officer [CFO] and senior directors [SENIOR]) and regulatory adjustments (RAs) in Organization for Economic Cooperation and Development public commercial banks.

Using principal component analysis (PCA) and regression models, the research analyzes a representative data set of these banks.

A significant negative correlation between risk governance characteristics and RAs is found. Sensitivity analysis on the regulatory Tier 1 capital ratio and the total capital ratio indicates mixed outcomes, suggesting a complex relationship that warrants further exploration.

The study’s limited sample size calls for further research to confirm findings and explore risk governance’s impact on banks’ capital structures.

Enhanced risk governance could reduce RAs, influencing banking policy.

The study advocates for improved banking regulatory practices, potentially increasing sector stability and public trust.

This study contributes to understanding risk governance’s role in regulatory compliance, offering insights for policymaking in banking.