Search results

The purpose of this paper is to investigate the tensile strength, Young’s modulus, dimensional stability and porosity of acrylonitrile butadiene styrene (ABS)–oil palm fiber composite filament for fused deposition modeling (FDM).

A new feedstock material for FDM comprising oil palm fiber and ABS as a matrix was developed by a twin screw extruder. The composite filament contains 0, 3, 5 and 7 Wt.% of oil palm fiber in the ABS matrix. The tensile test is then performed on the fiber composite filament, and the wire diameter is measured. In this study, the Archimedes method was used to determine the density and the porosity of the filament. The outer surface of the wire composite was examined using an optical microscope, and the analysis of variance was used to assess the significance and the relative relevance of the primary factor.

The results showed that increasing the fiber loading from 0.15 to 0.4 MPa enhanced tensile strength by 60%. Then, from 16.1 to 18.3 MPa, the Young’s modulus rose by 22.8%. The density of extruded filament decreased and the percentage of porosity increased when the fiber loading was increased from 3 to 7 Wt.%. The diameter deviation of the extruded filaments varied from −0.21 to 0.04 mm.

This paper highlights a novel natural resource-based feedstock material for FDM. Its mechanical and physical properties were also discovered.

Shape memory materials are functional materials having a good number of applications due to their unique features of programmable material technology such as self-stretching, self-assembly and self-tightening. Advancements in today’s technology led to the easy fabrication of such novel materials using 3D printing techniques. When an external stimulus causes a 3D printed specimen to change shape on its own, this process is known as 4D printing. This study aims to investigate the effect of graphene nano platelet (GNPs) on the shape memory behaviour of shape memory photo polymer composites (SMPPCs) and to optimize the shape-changing response by using the Taguchi method.

SMPPCs are synthesized by blending different weight fractions (Wt.%) of flexible or soft photopolymer (FPP) resin with hard photopolymer (HPP) resin, then reinforced with GNPs at various Wt.% to the blended PP resin, and then fabricated using masked stereolithography (MSLA) apparatus. The shape memory test is conducted to assess the shape recovery time (T), shape fixity ratio (R_f), shape recovery ratio (R_r) and shape recovery rate (V_r) using Taguchi analysis by constructing an L9 orthogonal array with parameters such as Wt.% of a blend of FPP and HPP resin, Wt.% of GNPs and holding time.

SMPPCs with A3, B3 and C2 result in a faster T with 2 s, whereas SMPPCs with A1, B1 and C3 result in a longer T with 21 s. The factors A and B are ranked as the most significant in the Pareto charts that were obtained, whereas C is not significant. It can be seen from the heatmap plot that when factors A and B increase, T is decreasing and V_r is increasing. The optimum parameters for T and V_r are A3, B3 and C2 at the same time for R_f and R_r are A1, B3 and C1.

Faster shape recovery results from a higher Wt.% of FPP resin in a blend than over a true HPP resin. This is because the flexible polymer links in FPP resin activate more quickly over time. However, a minimum amount of HPP resin also needs to be maintained because it plays a role in producing higher R_f and V_r. The use of GNPs as reinforcement accelerates the T because nanographene conducts heat more quickly, releasing the temporary shape of the specimen more quickly.

The use of FPP and HPP resin blends, fabricating the 4D-printed SMPPCs specimens with MSLA technology, investigating the effect of GNPs and optimizing the process parameters using Taguchi and the work was validated using confirmation tests and regression analysis, which increases the originality and novelty.

Material extrusion technology is considered to be an effective way to realize the accurate and integrated manufacturing of high-performance metal diamond tools with complex structures. The present work aims to report the G4 binder that can be used to create metal composite filament loading high concentrations of large diamond particles through comparative experiments.

The quality of filaments was evaluated by surface topography observation and porosity measurement. And the printability of filaments was further studied by the tensile test, rheological test, shear analysis and printing test.

The results show that the G4 binder exhibits the best capacity for loading diamonds among G1–G4. The L4 filament created with G4 has no defects such as pores, cracks and patterns on the surface and section, and has the lowest porosity, which is about 1/3 of the L1. Therefore, the diamond-containing composite filament based on G4 binder exhibits the best quality. On the other hand, the results of the tensile test of L5–L8 filaments reveal that as the diamond content increases from 10% to 30%, the tensile strength of the filament decreases by 29.52%, and the retention force coefficient decreases by 15.74%. This can be attributed to the formation of inefficient bonding areas of the clustered diamond particles inside the composite filament, which also leads to a weakening of the shear strength. Despite this, the results of the printing test show that the diamond-containing composite filament based on the G4 binder has reliable printability.

Therefore, the G4 binder is considered to solve the most critical first challenge in the development of diamond-containing filament.

This study aims to examine the factors influencing the effectiveness of zakat distribution to university students. Specifically, it examines technology improvement, procedural application and governance on Sarawak university students’ zakat distribution effectiveness.

This study used the questionnaire as a research instrument and divided it into five parts. Part A gathers demographic information of respondents. Part B measures the respondent’s opinion on current technology improvement. Part C measures university students’ opinion on zakat application procedures. Part D measures the governance concept of the zakat institution. Part E measures the effectiveness of zakat distribution.

This study found technology improvement and governance significantly influence the effectiveness of zakat distribution to university students. This study provides no significant influence of the procedural application on zakat distribution’s efficacy to university students.

This study suggested that technology plays an essential role in zakat distribution effectiveness by providing faster data processing, easier retrieval of information and time reduction to complete a task. The enforcement of good governance by zakat institutions allows them to be competitive, meets the stakeholders’ demand and serves them better.

This study provides understanding to the zakat institutions in developing appropriate zakat distribution strategies and strengthening their management and governance system.

This paper integrates technology improvement, procedural application and governance in zakat distribution.

The tear strength (Ts) is a significant property for any kind of soft polymeric material such as rubber, elastomer, viscoelastic material and its composites, to quantify the suitability of a material for any shape memory applications. Many times, the soft elastomeric polymer material has to be capable enough to deform to a maximum extent of displacement but at the same time, it has to withstand the maximum load without fail. Along with shape recovery properties (i.e. the ability to recover its shape from programmed to the original), the success of the shape memory cycle is mainly depending on its stiffness and strength. It has to resist tear during stretching (i.e. programming stage) as repeatedly subjected to deformation, and, hence, it is important to study the tear behaviour for shape memory polymers (SMPs) and their composites. The purpose of the work is to investigate the effect of parameters on Ts of 4D printed specimen using Taguchi method.

The objective of the work is to tailor the Ts of SMPs by reinforcing the graphene nano particles (GNPs) in a blended photopolymer (PP) resin with flexible PP and hard PP resin. In this study, a total of nine experiments were designed based on the L9 orthogonal array (OA) using the design of experiments (DOEs). All the shape memory photopolymer composite’s (SMPPCs) specimens are fabricated using masked stereolithography (MSLA), also known as resin three-dimensional printing (R3DP) technique.

Specimens are tested using universal testing machine (UTM) for maximum tear force (F_max) and displacement (δ) caused by tearing the specimen to evaluate the strength against the tear. The results showed that the Wt.% of resin blend highly influenced both F_max and δ, while GNPs also had an impact on δ. The specimens are offering more tear resistance for those specimens blended with less Wt.% of flexible PP at the same time the specimens enable more δ for those specimens reinforced with 0.3 Wt.% GNPs at 10-s exposure time. The optimum combinations are A1, B1 and C3 for the F_max and T_s and at the same time A1, B3 and C3 for δ.

To customise the tear resistance of SMPPCs using MSLA 3 D printing, this study suggested a blend of PP resins reinforced with GNPs. This opens up a new path for creating novel, inexpensive multi-functional 4-dimensional (4D) printed parts.

The use of flexible PP and hard PP resin blends, fabricating the SMPPCs specimens using 3 D printed MSLA technology, investigating the effect of GNPs, resin blend and exposure time, optimizing the process parameters using Taguchi and the work were all validated using confirmation tests and regression analysis using test train method, which increases the originality and novelty.

Malaysia’s industrialised building system (IBS) has been increasingly adopted for sustainable development by the country’s construction industry. However, although it has been used for commercial building projects, its application to sustainable infrastructure development has been limited to date. This study aims to examine the drivers and challenges involved.

A preliminary conceptual framework was initially developed based on a systematic literature review. Semi-structured interviews involving 20 participants were undertaken to gain insightful thoughts from the construction practitioners to discover the perception towards IBS application in the construction industry, the applicability of IBS, particularly in infrastructure projects, the strategies of IBS delivery and the sustainable potential of its application. A two-round Delphi study was conducted with 15 experienced and knowledgeable panellists to further identify, verify and prioritise factors developed from the literature review and interview findings. Then, the results were synthesised and triangulated to demonstrate a holistic insight.

The results show the main drivers to be better productivity, quality, environmental, safety and health, constructability design and cost, policy and requirements, with the main challenges being project planning and cost-related issues, inexperience and industry capacity.

The study’s main contribution is in systematically determining the practical implications involved in applying the IBS to sustainable infrastructure developments in Malaysia and other similar developing countries.

The increasing number of papers on zakah shows that it has become an important research topic. However, few studies attempt to analyze the evolution of zakah studies which might be helpful as guidance for policymakers in creating zakah management systems and policies, for zakah management organizations administering zakah funds, for future research on related subjects and for academic actors to construct a zakah study curriculum. This study aims to conduct a bibliometric analysis of the evolution of zakah theme publications from 1964 to 2021.

This study uses bibliometric analysis to analyze the evolution of zakah research. This study compared all Scopus-indexed journal papers to Zakah publications regarding research flow, themes, abstracts and titles. The relationships between researchers, the titles of the papers and keywords associated with “zakah” are analyzed in these publications published between 1964 and 2021. A total of 632 scientific contributions were discovered using RStudio and VOSviewer to analyze the bibliometric metadata.

Based on the results, the theme of zakah has evolved from 1964 to 2021. The author emphasizes the zakah publication theme. Each affiliation and country have its conditions, management method, data sources and characteristics. The theme “zakah institutions and zakah collecting” grew in popularity between 2010 and 2021 and is projected to grow in the following years. Malaysia, Indonesia and Pakistan can be used as zakah development research models. In spans of zakah publications, the author with the most global citations is Wahab N.A., and the author with the most productive is Saad Raj.

Zakah publications are analyzed using the Scopus database. This study applied only Scopus index data, excluding non-Scopus, and most studies conducted in non-English languages. This conclusion indicates the issue’s importance among academic researchers and practitioners, notably on the subject of zakah. Thus, a comprehensive picture of zakah theme publications assists researchers and zakah fund institutions in making assessments, focusing on the unstudied fraction of the zakah theme.

This research is planned to serve as a reference for future research, particularly examining the theme’s novelty. It is intended to have implications for policymakers, particularly zakah institutions, regarding funding the several zakah research issues and concentrations.

This research can guide future researchers and is expected to include parameters such as author, year and data source while analyzing zakah publications to generate new findings.

This is probably one of few comprehensive studies that examined the evolution of the zakah theme using the Scopus-indexed database. The relevance of this paper is to provide suggestions and projections for future zakah research. Scholars should examine zakah publications by author, year and data source to gain fresh insights. Search for data sources with high-impact factors and objective metrics, then clear out irrelevant documents to improve the analysis’ quality and findings.

This study aims to explore the possibility of using magnetic biochar composite (MBCC) derived from Heglig tree bark (HTB) powder (agricultural solid waste) and cobalt ferrite (CoFe₂O₄, CFO) for oil spill removal from seawater surface.

One-pot co-precipitation route was used to synthesize MBCC. The prepared materials were characterized by X-ray diffraction, scanning electron microscopy-energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy. The densities of the prepared materials were also estimated. Crude, diesel engine and gasoline engine oils were used as seawater pollutant models. The gravimetric oil removal (GOR) method was used for removing oil spills from seawater using MBCC as a sorbent material.

The obtained results revealed that the prepared materials (CFO and MBCC) were able to remove the crude oil and its derivatives from the seawater surface. Besides, when the absorbent amount was 0.01 g, the highest GOR values for crude oil (31.96 ± 1.02 g/g) and diesel engine oil (14.83 ± 0.83 g/g) were obtained using MBCC as an absorbent. For gasoline engine oil, the highest GOR (27.84 ± 0.46 g/g) was attained when CFO was used as an absorbent.

Oil spill removal using MBCC derived from cobalt ferrite and HTB. Using tree bark as biomass (eco-friendly, readily available and low-cost) for magnetic biochar preparation also is a promising method for minimizing agricultural solid wastes (e.g. HTB) and obtaining value-added-products.

Long COVID is a complex and highly heterogeneous condition with a variable symptom profile, and calls have been made for an integrated care approach to be taken for its management. To date, no studies have explored speech and language therapy services or needs associated with long COVID. This service evaluation aimed to gauge the level of demand on speech and language therapy services for individuals with long COVID in the UK; their clinical needs, the organisational arrangements of services and the barriers and facilitators of delivering quality care.

A service evaluation was undertaken via distribution of an online survey to speech and language therapists (SLTs) receiving referrals for individuals with long COVID. Analysis was completed using descriptive statistics, with thematic analysis to evaluate qualitative data.

One hundred and eleven SLTs responded. Eighty-six percent were seeing individuals with long COVID in their “everyday” service, in uni- or multi-disciplinary teams, without any “dedicated” resource. Dysphagia and dysphonia were the most reported symptoms. Most respondents (66.7%) indicated the individuals they were seeing were of working age, and that an individuals' speech and language therapy needs were impacting their wellbeing. Perceived barriers to quality care included fragmented and non-integrated care pathways. Multi-disciplinary and integrated working was a key enabler.

This study provides novel insights into the current speech and language therapy needs of and care pathways for individuals with long COVID in the UK SLTs have unique expertise and are integral to supporting individuals with long COVID and should be a part of integrated care teams.

Previous studies described the professional zakat had been limited. Generally, the past authors conducted a quantitative method with general results and did not focus on the behaviour of people who pay the professional zakat. As a result, the purpose of this study is to provide a comprehensive understanding of how the general public can pay their zakat using Bloom’s theory.

This research uses primary data with in-depth interviews from five informants, including civil servants (PNS) and private employees. Spiral analysis was used to analyse the data, arrange it, read it frequently, take brief notes, find categories, interpret and summarise it.

The results show Bloom’s theory can accommodate muzakki’s behaviour by paying professional zakat. It can be seen from the following conclusions: firstly, in the cognitive domain, muzakki’s behaviour of paying the professional zakat was motivated by their memories (experiences), the ability to interpret, the ability to understand the principles of zakat, the ability to understand the relations and the ability to understand the role of zakat from its norms. Secondly, in the affective domain, muzakki’s behaviour in paying the professional zakat was motivated by their ability to receive, give positive value, call others and dare to take risks. Thirdly, in the psychomotor domain, guided practice, mechanised practice and adoption drive muzakki’s behaviour of paying zakat.

This study has limitations regarding the number of samples (informants). In addition, the results of the research are designed to be very subjective so that they cannot be generalised to phenomena that exist in other places and countries that also require zakat in the profession. In the future, the results of this study can be used as a variable development with quantitative methods so that it can involve more samples to get maximum and a broader result.

This research has a valuable managerial impact on the zakat management institutions, particularly in Langsa, Aceh, Indonesia and all zakat institutions worldwide. Therefore, the central government can evaluate the zakat gap through various socialisation activities by promoting the cognitive, affective and psychomotor domains. Socialisation should improve people’s behaviour to pay zakat so that the amount of zakat collected will be higher and will reduce the gap between the potency of zakat and the zakat in reality which has been unequal so far.

This research will contribute to the significant development of zakat in terms of studying the behaviour of muzakki paying the professional zakat. Although the theory of planned behaviour was dominated by previous research, this research reveals other aspects of muzakki behaviour using Bloom’s model by elaborating on cognitive, affective and psychomotor domains.