Search results

Electric motor heating during biomass recovery and its handling on conveyor is a serious concern for the motor performance. Thus, the purpose of this paper is to design and develop a hardware prototype of master–slave electric motors based biomass conveyor system to use the motors under normal operating conditions without overheating.

The hardware prototype of the system used master–slave electric motors for embedded controller operated robotic arm to automatically replace conveyor motors by one another. A mixed signal based embedded controller (C8051F226DK), fully compliant with IEEE 1149.1 specifications, was used to operate the entire system. A precise temperature measurement of motor with the help of negative temperature coefficient sensor was possible due to the utilization of industry standard temperature controller (N76E003AT20). Also, a pulse width modulation based speed control was achieved for master–slave motors of biomass conveyor.

As compared to conventional energy based mains supply, the system is self-sufficient to extract more energy from solar supply with an energy increase of 11.38%. With respect to conventional energy based \ of 47.31%, solar energy based higher energy saving of 52.69% was reported. Also, the work achieved higher temperature reduction of 34.26% of the motor as compared to previous cooling options.

The proposed technique is free from air, liquid and phase-changing material based cooling materials. As a consequence, the work prevents the wastage of these materials and does not cause the risk of health hazards. Also, the motors are used with their original dimensions without facing any leakage problems.

Occupational safety issues among employees remains a contemporary and omnipresent concern. In developing countries, safety-related problems are amplified, resulting in higher incidences of serious accidents and occupational diseases. This study aims to evaluate employees’ knowledge and attitudes toward occupational health and safety, and how these influence overall occupational health and safety compliance. Ghana’s oil and gas industry provides the contextual backdrop for this research, given it is characterized by high rates of injury.

A positivist and deductive research strategy was used to quantitatively analyze both primary and secondary data sources. A structured survey was administered to industry employees, and multiple linear regression was used to establish the effects of employee’s knowledge and attitude toward occupational health hazards on overall health and safety compliance.

The findings indicate that most employees had both a high level of knowledge and positive attitude toward mitigating occupational health hazards. Moreover, the study reveals that most employees complied with occupational health safety practices. However, the study also reveals that the effect of employees’ knowledge and attitude toward occupational health hazards does not translate into deployment of comprehensive safety practices. Interestingly, female employees were found to be more knowledgeable and compliant with occupational health and safety practices than their male counterparts.

Premised upon the findings, the study recommends: implementation of relevant education and training programs encompassing the proper usage of machinery and equipment, tailored hazard safety training appropriate to specific employee job requirements, effective dissemination of risk information and governance initiatives that enforce strict adherence to correct safety procedures.

The study uniquely examines the influence of employee’s knowledge of health and safety to overall compliance within the oil and gas industry. Cumulatively, the study’s findings and recommendations contribute to improving the occupational health and safety outcomes within the industry.

The construction industry is widely recognized as one of the most hazardous sectors in the world. Despite extensive research on safety management, a critical issue remains that insufficient attention is devoted to safety practices in rural areas. Notably, accidents frequently occur during the construction of rural self-built houses (RSH) in China. Safety management tends to be overlooked due to the perceived simplicity of the construction process. Furthermore, it is essential to acknowledge that China currently lacks comprehensive laws and regulations governing safety management in RSH construction. This paper aims to analyze the behavior of key stakeholders (including households, workmen, rural village committee and the government) and propose recommendations to mitigate safety risks associated with RSH construction.

This paper applies evolutionary game theory to analyze the symbiotic evolution among households, workmen and rural village committee, in situations with or without government participation. Additionally, numerical simulation is utilized to examine the outcomes of various strategies implemented by the government.

Without government participation, households, workmen, and rural village committee tend to prioritize maximizing apparent benefits, often overlooking the potential safety risks. Numerical simulations reveal that while government involvement can guide these parties towards safer decisions, achieving the desired outcomes necessitates the adoption of reasonable and effective strategies. Thus, the government needs to offer targeted subsidies to these stakeholders.

Considering that during the construction phase, stakeholders are the main administrators accountable for safety management. However, there exists insufficient research examining the impact of stakeholder behavior on RSH construction safety. This study aims to analyze the behavior of stakeholders about how to reduce the safety risks in building RSH. Thus, the authors intend to contribute to knowledge in this area by establishing evolutionary game model. Firstly, this study carried out a theoretical by using tripartite evolutionary game to reveal the reasons for the high safety risk during building RSH. Practically, this research points out the important role of households, workmen and rural village committee in improving safety management in rural areas. Besides, some suggestions are proposed to the government about how to reduce construction safety risks in rural areas.

This study empirically examines the impact of climate change and agricultural research and development (R&D) as well as their interaction on agricultural productivity in 12 selected Asian and Pacific countries over the period of 1990–2018.

Various estimation methods for panel data, including Fixed Effects (FE), the Feasible Generalized Least Squares (FGLS) and two-step System Generalized Method of Moments (SGMM) were used.

Results show that both proxies of climate change – temperature and precipitation – have negative impacts on agricultural productivity. Notably, agricultural R&D investments not only increase agricultural productivity but also mitigate the detrimental impact of climate change proxied by temperature on agricultural productivity. Interestingly, climate change proxied by precipitation initially reduces agricultural productivity until a threshold of agricultural R&D beyond which precipitation increases agricultural productivity.

The findings imply useful policies to boost agricultural productivity by using R&D in the context of rising climate change in the vulnerable continent.

This study contributes to the literature in two ways. First, this study examines how climate change affects agricultural productivity in Asian and Pacific countries – those are most vulnerable to climate change. Second, this study assesses the role of R&D in improving agricultural productivity as well as its moderating effect in reducing the harmful impact of climate change on agricultural productivity.

Prefabricated columns connected by grouted sleeves are increasingly used in practical projects. However, seismic fragility analyses of such structures are rarely conducted. Seismic fragility analysis has an important role in seismic hazard evaluation. In this paper, the seismic fragility of sleeve connected prefabricated column is analyzed.

A model for predicting the seismic demand on sleeve connected prefabricated columns has been created by incorporating engineering demand parameters (EDP) and probabilities of seismic failure. The incremental dynamics analysis (IDA) curve clusters of this type of column were obtained using finite element analysis. The seismic fragility curve is obtained by regression of Exponential and Logical Function Model.

The IDA curve cluster gradually increased the dispersion after a peak ground acceleration (PGA) of 0.3 g was reached. For both columns, the relative displacement of the top of the column significantly changed after reaching 50 mm. The seismic fragility of the prefabricated column with the sleeve placed in the cap (SPCA) was inadequate.

The sleeve was placed in the column to overcome the seismic fragility of prefabricated columns effectively. In practical engineering, it is advisable to utilize these columns in regions susceptible to earthquakes and characterized by high seismic intensity levels in order to mitigate the risk of structural damage resulting from ground motion.

Every day, small and big incidents happen all over the world, and given the human, financial and spiritual damage they cause, proper planning should be sought to deal with them so they can be appropriately managed in times of crisis. This study aims to examine humanitarian supply chain models.

A new model is developed to pursue the necessary relations in an optimal way that will minimize human, financial and moral losses. In this developed model, in order to optimize the problem and minimize the amount of human and financial losses, the following subjects have been applied: magnitude of the areas in which an accident may occur as obtained by multiple attribute decision-making methods, the distances between relief centers, the number of available rescuers, the number of rescuers required and the risk level of each patient which is determined using previous data and machine learning (ML) algorithms.

For this purpose, a case study in the east of Tehran has been conducted. According to the results obtained from the algorithms, problem modeling and case study, the accuracy of the proposed model is evaluated very well.

Obtaining each injured person's priority using ML techniques and each area's importance or risk level, besides developing a bi-objective mathematical model and using multiple attribute decision-making methods, make this study unique among very few studies that concern ML in the humanitarian supply chain. Moreover, the findings validate the results and the model's functionality very well.

This study explores whether the unique organizational form of family firms helps to mitigate the negative effects caused by the announcement of product recalls.

The authors use an event study, for a sample of 2,576 product recalls in the United States (US) automobile industry, between January 2010 and June 2021.

The authors found that stock market's reaction to a product recall announcement is less negative for family firms. This superior performance is partially driven by the family firms' long-term investment horizons and higher strategic emphasis on product quality. However, the relationship between family ownership and cumulative abnormal returns around product recall announcements is nonlinear as the impact of family ownership starts by being positive but becomes negative for higher levels of family ownership. The authors also find that family firm's chief executive officer (CEO) and managerial ownership influence positively the stock market reaction to product recall announcements.

This work has several implications for family firms' management as well as for investors and financial analysts. First, as higher managerial ownership is associated with a greater emphasis on product quality, decreasing stock market losses when a product recall occurs, family firms should consider increasing equity-based compensation. Second, as there seems to exist an optimal proportion of family ownership, family firms should consider the risks of increasing too much their ownership share. Third, investors and financial analysts can use the results in the study to help them in their investment and trading decisions in the stock market.

The authors extend the knowledge of product recalls by studying the under-researched role of the flexible, internally focused culture of family businesses on the stock market reaction to product recalls.

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

Natural disasters profoundly influence agricultural trade sustainability. This study investigates the effects of natural disasters on agricultural production imports in China within 2002 and 2018. This exploration estimates the mediating role of transportation infrastructure and agriculture value-added and the moderating role of government effectiveness and diplomatic relations.

This investigation uses Probit, Logit, Cloglog and Ordinary Least Squares (OLS) models.

The results confirm the mediating role of transportation infrastructure and agriculture value-added and the moderating role of government effectiveness and diplomatic relations in China. According to the findings, natural disasters in trading partners heighten the risk to the agricultural imports. This risk raises, if disasters damage overall agricultural yield or transportation infrastructure. Moreover, governments’ effective response or diplomatic ties with China mitigate the risk. Finally, the effect of disasters varies by the developmental status of the country involved, with events in developed nations posing a greater risk to China’s imports than those in developing nations.

China should devise an early warning system to protect its agricultural imports by using advanced technologies such as data analytics, remote sensing and artificial intelligence. In addition, it can leverage this system by improving its collaboration with trading partners, involvement in international forums and agreement for mutual support in crisis.

The current chapter proposes a theoretical framework to assess the sustainability of economic growth in the Gulf Cooperation Council (GCC) States. The authors integrate insights from endogenous growth models and consider the unique socioeconomic characteristics of the GCC region to provide a comprehensive and tailored approach to understanding the determinants of economic growth and formulating effective policy measures to foster sustainable development and growth. This chapter highlights the environmental challenges faced by GCC; based on this, the authors suggested indicators to construct a theoretical framework (Economic Growth, Climatic Indicators, Energy Indicators, Social Indicators, and Economic Resources Indicators). The authors propose that policymakers and researchers in GCC States should take these factors into account when devising policies or conducting research aimed at fostering sustainable economic growth. Overall, this chapter presents significant insights for policymakers, researchers, and stakeholders involved in promoting the sustainable economic advancement of the GCC States.