Search results

For close to two decades, the West African Monetary Zone (WAMZ) has been preparing to launch a second monetary union within the ECOWAS region. This study aims to determine the impact such a unionised monetary regime will have on financial stability as represented by the nonperforming loan ratios of Ghana in a counterfactual framework.

This study models nonperforming loan ratios as dependent on the monetary policy rate and the business cycle. The study then used historical data to estimate the parameters of the nonperforming loan ratio response function using an Autoregressive Distributed Lag (ARDL) approach. The estimated parameters are further used to estimate the impact of several counterfactual unionised monetary policy rates on the nonperforming loan ratios and its volatility of Ghana. As robustness check, the Least Absolute Shrinkage Selection Operator (LASSO) regression is also used to estimate the nonperforming loan ratios response function and to predict nonperforming loans under the counterfactual unionised monetary policy rates.

The results of the counterfactual study reveals that the apparent cost of monetary unification is much less than supposed with a monetary union likely to dampen volatility in non-performing loans in Ghana. As such, the WAMZ members should increase the pace towards monetary unification.

The paper contributes to the existing literature by explicitly modelling nonperforming loan ratios as dependent on monetary policy and the business cycle. The study also settles the debate on the financial stability cost of a monetary union due to the nonalignment of business cycles and economic structures.

The number of young people using e-cigarettes (commonly referred to as vaping) has grown at an alarming rate, creating the need for urgent action. This paper demonstrates rapid step-by-step iterative application of the Co-create, Build and Engage (CBE) framework to showcase how marketing was applied in response to emerging trends that have negative health and environmental consequences. This paper aims to demonstrate how CBE is applied iteratively, ensuring student feedback leads module development.

In Study 1, a pure seven-step co-design implementation, 19 high school students were invited to co-design a vaping prevention approach that would work for them and other people like them. During the sensitisation phase of co-design, students completed one Blurred Minds Vaping module. Feedback grids were provided, with students identifying likes, dislikes and ideas. This likeability data was used, together with input from technical experts and pedagogical best practice, in a 12-week research and development project that aimed to develop a new online learning module focused on vaping and their environmental impacts for the Blurred Minds Academy. The new module was tested with 20 high school students. Feedback grids were provided once again, allowing a comparison of results.

Examination of feedback grid data demonstrates that the newly developed Vaping and the Environment module was improved. Considerations taken on board in the new module design (e.g. increased variability within the module) overcame criticisms expressed previously (e.g. it was boring and too long). Other criticisms remained evident, albeit at a much lower proportion suggesting the new Vaping and the Environment module, and future Blurred Minds module development, would benefit from iterative CBE application.

Conduit et al. (2022) note that marketing academia has been criticised for having an increasingly less relevant managerial agenda. This paper outlines a rapid step-by-step application of marketing in response to one of society’s most pressing health challenges – vaping. The iterative application of CBE is outlined, demonstrating that the student experience can be enhanced when marketing’s continual improvement mindset is used. This is the first vaping prevention programme that has included substantive information around the negative impacts of vaping on the environment.

Wage employees enter self-employment either directly or in a staged manner and may subsequently undertake multiple stints at self-employment. Extant research on the relationship between entry modes and the persistence and outcomes of self-employment is inconclusive. This study investigates the relationship between wage employees’ initial mode of entry into self-employment and the duration of the subsequent first two stints of self-employment.

This study used a matched longitudinal sample of 9,550 employees who became majority owners of incorporated firms from 2005 to 2016.

The findings demonstrate that the initial mode of entry into self-employment matters for the first two stints at self-employment. Staged entry into self-employment was associated with a shorter first stint and became insignificant for the second stint. Staged entry into self-employment was positively related to the odds of becoming self-employed for the second time in the same firm.

Using a comprehensive and reliable dataset, the paper shifts focus from the aggregated onward journey of novice entrepreneurs (survival as the outcome) to the duration of their self-employment stints. By doing so, the paper offers insights into the process of becoming self-employed and the patterns associated with success/failure in entrepreneurship associated with self-employment duration.

This study aims to gain a deeper understanding of the industry practice to guide the formation of support tools with a rigorous theoretical backing. Cross-functional teams are an essential component in new product development (NPD) of complex products to promote comprehensive coverage of product design, marketing, sales, support as well as many other activities of business. Efficient use of teams can allow for greater technical competency coverage, increased creativity, reduced development times and greater consideration of ideas from a variety of stakeholders. While academics continually aspire to propose methods for improved team composition, there exists a gap between research directions and applications found within industry practice.

Through interviewing product development managers working across a variety of industries, this paper investigates the common practices of team utilization in an organizational setting. Following these interviews, this paper proposes a conceptual two-dimensional management support model aggregating the primary drivers of team success and providing direction to systematically address features of team management and composition.

Based on this work, product managers are recommended to continually address the positioning of members throughout the entire NPD process. In the early stages, individuals are to be placed to work on project components with explicit consideration toward the perceived complexity of tasks and individual competency. Throughout the development process, individuals’ positions vary based on new information while continued emphasis is placed on maintaining a shared understanding.

Bridging the gap between theory and application within product development teams is a necessary step toward improved product develop. Industrial settings require practical solutions that can be applied economically and efficiently within their organization. Theoretical reflections postulated by academia support improved team design; however, to achieve true success, they must be applicable when considering product development.

Every business company deals with the dilemma of how much to invest in long-term (LT) versus short-term (ST) problem (LTvST problem). LT operations increase the reputation of the company, and revenue is rewarded in the future. In contrast, ST operations result in immediate rewards. Thus, every organization faces the dilemma of how much to invest in LT versus ST activities. The former deals with the “what” or effectiveness, and the latter deals with the “how” or efficiency. The role of managers is to solve this dilemma; however, they often fail to do so, mainly because of a lack of knowledge. This study aims to propose a dynamic optimal control model that formulates and solves the LTvST problem.

This study proposes a dynamic optimal control model that formulates and solves the dilemma whether to invest in short- or LT operations.

This model is illustrated as an example of an academic institute that wants to maximize its reputation. Investing in effectiveness in the academy translates into investing in research, whereas investing in efficiency translates into investing in teaching. Universities and colleges with a good reputation attract stronger candidates and benefit from higher tuition fees. Steady-state conditions and insightful observations were obtained by studying the optimal solution and performing a sensitivity analysis.

To the best of the authors’ knowledge, this paper is the first one to explore the optimal strategy when trying to maximize the short and LT activities of a company and solve the LTvST problem. Furthermore, it is applied on universities where teaching is the ST activity and research the LT activity. The insights gleaned from the application are relevant to many different fields. The authors believe that the paper makes a significant contribution to academic literature and to business managers.

Practitioners and academics are starting to recognize the benefits of green IT/IS practices. Despite these benefits, this study aims to know more regarding the factors that would drive organizations to use green IT/IS practices within their IT function and across the enterprise. To further understanding in this area, this study applies a strategic cognition framework of firm responsiveness and institutional theory to determine the extent to which an organization uses green IT/IS practices in response to stakeholder concerns. This study investigates the extent to which two organizational logics – expressive and instrumental – and three institutional pressures – coercive, mimetic and normative – jointly affect an organization's use of both green IT practices and green IS practices.

This study tested the hypotheses with survey data collected from 306 organizations. Structural equation modeling was used for data analysis.

Findings support four joint effects: (1) individualistic identity orientation and coercive pressure positively affect green IT practices; (2) collectivistic identity orientation and normative pressure positively influence green IS practices; (3) cost reduction orientation and mimetic pressure positively affect green IT practices; and (4) revenue expansion orientation and normative pressure positively influence green IS practices.

This study contributes to the literature by providing evidence for joint drivers of green IT and green IS practices. Green IT and IS practices represent organizations' different levels of commitment to environmental sustainability and responsiveness to stakeholders (i.e. green IT/IS practices). Organizations of different expressive and instrumental orientations are attuned to institutional pressures to various degrees, which leads to different green IT/IS practices.

Managers must make numerous strategic decisions in order to initiate and implement a business model innovation (BMI). This paper examines how managers perceive the management team interacts when making BMI decisions. The paper also investigates how group biases and board members’ risk willingness affect this process.

Empirical data were collected through 26 in-depth interviews with German managing directors from 13 companies in four industries (mobility, manufacturing, healthcare and energy) to explore three research questions: (1) What group effects are prevalent in BMI group decision-making? (2) What are the key characteristics of BMI group decisions? And (3) what are the potential relationships between BMI group decision-making and managers' risk willingness? A thematic analysis based on Gioia's guidelines was conducted to identify themes in the comprehensive dataset.

First, the results show four typical group biases in BMI group decisions: Groupthink, social influence, hidden profile and group polarization. Findings show that the hidden profile paradigm and groupthink theory are essential in the context of BMI decisions. Second, we developed a BMI decision matrix, including the following key characteristics of BMI group decision-making managerial cohesion, conflict readiness and information- and emotion-based decision behavior. Third, in contrast to previous literature, we found that individual risk aversion can improve the quality of BMI decisions.

This paper provides managers with an opportunity to become aware of group biases that may impede their strategic BMI decisions. Specifically, it points out that managers should consider the key cognitive constraints due to their interactions when making BMI decisions. This work also highlights the importance of risk-averse decision-makers on boards.

This qualitative study contributes to the literature on decision-making by revealing key cognitive group biases in strategic decision-making. This study also enriches the behavioral science research stream of the BMI literature by attributing a critical influence on the quality of BMI decisions to managers' group interactions. In addition, this article provides new perspectives on managers' risk aversion in strategic decision-making.

This study is intended to investigate the relationship between supervisor bottom-line mentality (BLM) and employee workplace well-being. In addition, this study discusses the mediating roles of perception of organizational politics and job anxiety in this relationship.

Data were gathered from a two-wave survey of 301 full-time employees in southern China. The PROCESS macro in SPSS was applied to test the hypotheses.

Results showed that supervisor BLM was negatively related to employee workplace well-being. Moreover, perceptions of organizational politics and job anxiety played multiple mediating roles in the relationship between supervisor BLM and employee workplace well-being.

Drawing on the conservation of resource (COR) theory and cognitive-affective personality system (CAPS) theory, this study proposes a multiple mediation model to advance our understanding of how supervisor BLM affects employee workplace well-being.

The purpose of this study is to investigate how consumer brand engagement (CBE) promotes brand love and eWOM within the influence of brand interactivity and consumer involvement, especially in the context of the smartphone industry and Chinese social media marketing. This study also examines the important role of brand love and gender in this relationship.

Data from 403 participants who are followers of the smartphone brand’s social media page was collected via an online survey. PLS-SEM was also used for examining the research model.

The findings of this research reveal that the (perceived) brand interactivity, and consumer involvement, are key factors influence CBE. As expected, brand love and consumers’ eWOM intention are significant outcomes of CBE. In particular, the relationship between CBE and consumers’ eWOM intention is mediated by brand love. However, gender did not moderate the proposed relationships.

By integrating social exchange theory and attribution theory, this study deepens the understanding of CBE and brand love by examining the relationship between brand interactivity, consumer involvement, CBE, brand love and eWOM in the context of smartphone and Chinese social media marketing.