Search results

The purpose of this paper is to present the investigation of the pressure-driven flow of aluminum oxide-water based nanofluid with the combined effect of entropy generation and radiative electro-magnetohydrodynamics filled with porous media inside a symmetric wavy channel.

The non-linear coupled differential equations are first converted into a number of ordinary differential equations with appropriate transformations and then analytical solutions are obtained by homotopic approach. Numerical simulation has been designed by the most efficient approach known homotopic-based Mathematica package BVPh 2.0 technique. The long wavelength approximation over the channel walls is taken into account. The obtained analytical results have been validated through graphs to infer the role of most involved pertinent parameters, whereas the characteristics of heat transfer and shear stress phenomena are presented and examined numerically.

It is found that the velocity profile decreases near to the channel. This is in accordance with the physical expectation because resistive force acts opposite the direction of fluid motion, which causes a decrease in velocity. It is seen that when the electromagnetic parameter increases then the velocity close to the central walls decreases whereas quite an opposite behavior is noted near to the walls. This happens because of the combined influence of electro-magnetohydrodynamics. It is perceived that by increasing the magnetic field parameter, Darcy number, radiation parameter, electromagnetic parameter and the temperature profile increases, and this is because of thermal buoyancy effect. For radiation and electromagnetic parameters, energy loss at the lower wall has substantial impact compared to the upper wall. Residual error minimizes at 20th order iterations.

The proposed prospective model is designed to explore the simultaneous effects of aluminum oxide-water base nanofluid, electro-magnetohydrodynamics and entropy generation through porous media. To the best of author’s knowledge, this model is reported for the first time.

The purpose of this paper is to present a novel model on the unsteady MHD flow of heat transfer in carbon nanotubes with variable viscosity over a shrinking surface.

The temperature-dependent viscosity makes the proposed model non-linear and coupled. Consequently, the resulting non-linear partial differential equations are first reformed into set of ordinary differential equations through appropriate transformations and boundary layer approximation and are then solved numerically by the Keller box method.

Graphical and numerical results are executed keeping temperature-dependent viscosity of nanofluid. It is noted that, for diverse critical points, it is found that at one side of these critical values, multiple solutions exist; on the other side, no solution exists. A comparison is also computed for the special case of existing study. The temperature and pressure profiles are also plotted for various effective parameters.

The work is original.

The purpose of this study is to discuss the Darcy–Forchheimer nanoliquid bio-convection flow by stretching cylinder/plate with modified heat and mass fluxes, activation energy and gyrotactic motile microorganism features.

The proposed flow model is based on flow rate, temperature of nanomaterials, volume fraction of nanoparticles and gyrotactic motile microorganisms. Heat and mass transport of nanoliquid is captured by the usage of popular Buongiorno relation, which allows us to evaluate novel characteristics of thermophoresis diffusion and Brownian movement. Additionally, Wu’s slip (second-order slip) mechanisms with double stratification are incorporated. For numerical and graphical results, the built-in bvp4c technique in computational software MATLAB along with shooting technique is used.

The influence of key elements is illustrated pictorially. Velocity decays for higher magnitude of first- and second-order velocity slips and bioconvection Rayleigh number. The velocity of fluid has an inverse relation with mixed convection parameter and local inertia coefficient. Temperature field enhances with the increase in estimation of thermal stratification Biot number and radiation parameter. A similar situation for concentration field is observed for mixed convection parameter and concentration relaxation parameter. Microorganism concentration profile decreases for higher values of bioconvection Lewis number and Peclet number. A detail discussion is given to see how the graphical aspects justify the physical ones.

To the best of the authors’ knowledge, original research work is not yet available in existing literature.

The purpose of this study is to investigate the monodisperse cavitation of bubbly mixture flow for water and hydrogen mixture flows through a nozzle having a stenosis on the wall.

Two flow regions, namely, quasi-statically stable and quasi-statically unstable increase in the bubble radius, are considered. Different oscillating periods of bubbles in downstream corresponding to various values of Reynolds number are taken into account. The Range–Kutta method is used to tackle nonlinear coupled system of governing equations.

It is observed that for the larger values of Reynolds number, the void fraction at the upstream section, even at small values, yields instabilities at the downstream. Consequently, owing to sudden increase in the velocity, the bubbles strike the wall with high speed that eventually remove the existing stenosis. This process can be considered as an effective cardiac surgery for arteries with semi-blockage.

Original research work and to the best of author’s knowledge, this model is reported for the first time.

The particle distribution in a fluid is mostly not homogeneous. The inhomogeneous dispersion of solid particles affects the velocity profile as well as the heat transfer of fluid. This study aims to highlight the effects of varying density of particles in a fluid. The fluid flows through a wavy curved passage under an applied magnetic field. Heat transfer is discussed with variable thermal conductivity.

The mathematical model of the problem consists of coupled differential equations, simplified using stream functions. The results of the time flow rate for fluid and solid granules have been derived numerically.

The fluid and dust particle velocity profiles are being presented graphically to analyze the effects of density of solid particles, magnetohydrodynamics, curvature and slip parameters. Heat transfer analysis is also performed for magnetic parameter, density of dust particles, variable thermal conductivity, slip parameter and curvature. As the number of particles in the fluid increases, heat conduction becomes slow through the fluid. Increase in temperature distribution is noticed as variable thermal conductivity parameter grows. The discussion of variable thermal conductivity is of great concern as many biological treatments and optimization of thermal energy storage system’s performance require precise measurement of a heat transfer fluid’s thermal conductivity.

This study of heat transfer with inhomogeneous distribution of the particles in a fluid has not yet been reported.

The purpose of present communication is to analyze Darcy–Forchheimer flow of viscous nanofluid by curved stretchable surface. Flow in porous medium is characterized by Darcy–Forchheimer relation. Brownian diffusion and thermophoresis are considered. Convective heat and mass boundary conditions are also used at the curved stretchable surface.

The resulting nonlinear system is solved through shooting technique.

Skin friction coefficient is enhanced for larger porosity parameter and inertia coefficient while reverse trend is noticed for curvature parameter. Local Nusselt number is enhanced for higher Prandtl number and thermal Biot number, whereas the opposite trend is seen via curvature parameter, porosity parameter, inertia coefficient, thermophoresis parameter and Brownian motion parameter. Local Sherwood number is enhanced for Schmidt number, Brownian motion parameter and concentration Biot number, while reverse trend is noticed for curvature parameter, porosity parameter, inertia coefficient and thermophoresis parameter.

To the best of author’s knowledge, no such consideration has been given in the literature yet.

This paper aims to deal with the heat transmission of Sutterby fluid-containing gyrotactic microorganism by incorporating non-Darcy resistance law. The mathematical modeling is based on nanoparticle concentration, energy, momentum and motile microorganism equations.

The governing nonlinear coupled equations are first rendered into nonlinear ordinary equations using appropriate transformation and are then solved analytically by using the optimal homotopy.

Graphical illustration of results depict the behavior of flow involved physical parameters on temperature, gyrotactic microorganism, concentration and velocity. Additionally, local Nusselt number and skin friction coefficient are computed numerically and validated through comparison with existing literature as a special case of proposed model. It is found that the temperature profile decreases by increasing values of Brownian-motion parameter and Prandtl number. An increase in thermophoresis parameter and Schmidt number results in decrease in concentration of nanoparticles. Bioconvection Peclet number corresponds to decreasing behavior of nondimensional gyrotactic microorganism field is observed. Finally, a comparison with the existing literature is made, and an excellent agreement is seen.

To the best of the authors’ knowledge, this study is reported for the first time.

This study aims to investigate the effect of two-dimensional Darcy-Forchheimer flow over second-grade fluid with linear stretching. Heat transfer through convective boundary conditions is taken into account.

Nonlinear coupled governing equations are tackled with a homotopy algorithm, while for numerical computation the computer software package BVPh 2.0 is used. The convergence analysis is also presented for the validation of analytical and numerical results.

Valuation for the impact of key parameters such as variable thermal conductivity, Dufour and Soret effects and variable magnetic field in an electrically conducted fluid on the velocity, concentration and temperature profiles are graphically illustrated. It is observed from the results that temperature distribution rises by Dufour number whereas concentration distribution rises by Soret number. The Forchheimer number and porosity parameter raise the skin friction coefficient. The permeable medium has a vital impact and can help in reining the rate of heat transfer.

The permeable medium has a vital impact and can help in reining the rate of heat transfer.

To the best of the authors’ knowledge, this study is reported for the first time.

The purpose of this study is to examine the impact of activation energy with binary chemical reaction for unsteady flow on permeable stretching surface.

The simultaneous effects of multiple slip and magneto-hydrodynamic effects at the boundary are taken into account. The thermal buoyancy parameter and thermal radiation are included in both energy and momentum equations, while expression of activation energy is considered in concentration equation. Three-stage Lobatto IIIa finite difference collocation technique with bvp4c MATLAB package is used to obtained numerical results.

The influence of key elements (Schmidt number, buoyancy force ratio factor, factor of radiation, magnetic element, unsteadiness factor, suction/injection parameter, Prandtl number, activation energy, chemical reaction rate parameter, heat source and sink parameters, velocity, thermal and concentration slips, porosity parameter and temperature difference parameter) on velocity, temperature and concentration profiles are illustrated pictorially. A detailed discussion is presented to see how the graphical aspects justify the physical prospect.

In the best of author’s knowledge, this work is yet not available in existing literature.

The purpose of this study is to examine the simultaneous effects of Hafnium particles and partially submerged metallic particles for the flow of bi-phase coupled stress fluid over an inclined flat plane.

An unflinching free stream flow that stretches far from the surface of the plane with the possibility of containing some partially submerged metallic particles is considered. Innovative model has been proposed and designed using Runge–Kutta–Fehlberg method.

The findings show that the drag force resists the couple stress fluid, whereas the Newtonian flow is supported by increasing the velocity. For both types of flows, movement of the particle is retarded gradually against the drag force coefficient.

To the best of the authors’ knowledge, this model is reported for the first time.