Search results

Drug cryptomarkets increase information available to market actors, which should reduce information asymmetry and increase market efficiency. This study aims to determine whether cryptomarket listings accurately represent the advertised substance, weight or number and purity, and whether there are differences in products purchased from the same listing multiple times.

Law enforcement drug purchases – predominantly cocaine, methamphetamine, MDMA and heroin – from Australian cryptomarket vendors (n = 38 in 2016/2017) were chemically analysed and matched with cryptomarket listings (n = 23). Descriptive and comparative analyses were conducted.

Almost all samples contained the advertised substance. In most of these cases, drugs were either supplied as-advertised-weight or number, or overweight or number. All listings that quantified purity overestimated the actual purity. There was no consistent relationship between advertised purity terms and actual purity. Across the six listings purchased from multiple times, repeat purchases from the same listing varied in purity, sometimes drastically, with wide variation detected on listings purchased from only one month apart.

In this data set, cryptomarket listings were mostly accurate, but the system was far from perfect, with purity overestimated. A newer, larger, globally representative sample should be obtained to test the applicability of these findings to currently operating cryptomarkets.

This paper reports on the largest data set of forensic analysis of drug samples obtained from cryptomarkets, where data about advertised drug strength/dose were obtained.

This study assesses postreplanting oil palm farming risks, analyzes seed procurement parameters, investigates seed institutions' performance factors and develops a framework for improved sustainability.

Incorporating data from 219 smallholder farmers in designated replanting areas, our study comprehensively evaluates seed supply performance, examining the roles of stakeholders and identifying potential risks in seed management. We assess these risks using the Risk Priority Number (RPN) methodology and Multidimensional Scaling (MDS) techniques.

The results show that the timing and quantity of oil palm seed supply have a relatively small impact on postreplanting failure risk. To mitigate this risk, focus on monitoring seed purity using high-quality Tenera oil palm-type seeds and early detection technology. Encourage seed-producing cooperatives to become legal seed producers for an inclusive system and consider smallholders' variety preferences.

This study’s significance lies in its comprehensive assessment of the risks associated with oil palm replanting on smallholder plantations, detailed analysis of critical parameters in seed procurement, investigation into the performance of palm oil seed institutions across various dimensions and development of a strategic framework to strengthen inclusive seed institutions for sustainable oil palm farming. This strategy holds valuable potential for the development of oil palm in Indonesia, particularly in expediting the smallholders' replanting program.

The peer review history for this article is available at: https://publons.com/publon/10.1108/IJSE-10-2023-0811

Drawing on a larger study of coaches, parents, and children involved in nonelite sport in New Zealand, this chapter examines Jay Coakley's (2021) concept of the “Great Sport Myth” (GSM), whereby a strong belief in the innate purity and goodness of sport produces a reluctance to criticize it. This chapter emphasizes the developmental outcomes that parents and children believe are gained through sport and demonstrates the ways that parents relinquish control to coaches and reinforce the dominance of the coach as the decision-maker through their belief in the strength of the GSM. These findings are significant, given the large number of abuse cases that have come to light in sport in recent decades where the absence of parental intervention is marked. Not only are children socialized by their time in sport, but so too are parents, who are taught that they are “good” parents if they trust the work of the coach. The findings are also at odds with a prevailing neoliberal emphasis on individualization, especially in education policy and practice, where parents are more likely to intervene to assert the individualized needs of their children. This study is unique in addressing the relatively neglected experiences of those who play at the competitive, but not serious or elite, end of sport.

This study aims to prepare an imprinted composite membrane with grafted temperature-sensitive blocks for the efficient adsorption and separation of rhenium(Re) from aqueous solutions.

PVDF resin membrane was used as the substrate, dopamine and chitosan (CS) were used to modify the membrane surface and temperature-sensitive block PDEA was grafted on the membrane surface. Then acrylic acid (AA) and N-methylol acrylamide (N-MAM) were used as the functional monomers, ethyleneglycol dimethacrylate (EGDMA) as the cross-linker and ascorbic acid-hydrogen peroxide (Vc-H₂O₂) as the initiator to obtain the temperature-sensitive ReO4⁻ imprinted composite membranes.

The effect of the preparation process on the performance of CS–Re–TIICM was investigated in detail, and the optimal preparation conditions were as follows: the molar ratios of AA–NH₄ReO₄, N-MAM and EGDMA were 0.13, 0.60 and 1.00, respectively. The optimal temperature and time of the reaction were 40 °C and 24 h. The maximum adsorption capacity of CS–Re–TIICM prepared under optimal conditions was 0.1071 mmol/g, and the separation was 3.90 when MnO4⁻ was used as the interfering ion. The quasi first-order kinetics model and Langmuir model were more suitable to describe the adsorption process.

With the increasing demand for Re, the recovery of Re from Re-containing secondary resources becomes important. This study demonstrated a new material that could be separated and recovered Re in a complex environment, which could effectively alleviate the conflict between the supply and demand of Re.

This contribution provided a new material for the selective separation and purification of ReO4⁻, and the adsorption capacity and separation of CS–Re–TIICM were increased with 1.673 times and 1.219 time compared with other Re adsorbents, respectively. In addition, when it was used for the purification of NH₄ReO₄ crude, the purity was increased from 91.950% to 99.999%.

Electrical characteristics of transformer oil (TO) have been studied during normal and thermal aging conditions. In this paper, breakdown voltage (BDV), partial discharge (PD), heat transfer results and the physical mechanisms considering the impact of varying the diameter of Al₂O₃ nanoparticles (NPs) have been investigated. Different quantities of the two sizes of Al₂O₃ were added to the oil using a two-step method to determine the positive effect of NPs on the electrical and thermal properties of TO. Finally, the physical mechanisms related to the obtained experimental results have been performed.

The implementation of nanoparticles in this paper was provided by US Research Nanomaterials, Inc., USA. The provided Al₂O₃ NPs have an average particle size of 20–80 nm and a specific surface area of 138 and 58 m²/g, respectively, which have a purity of over 99%. Thermal aging has been done. The IEC 60156 standard has been implemented to calculate the BDV, and a 500-mL volume test cell (Apar TO 1020) has been used. PD test is performed according to Standard IEC 60343, and a JDEVS-PDMA 300 device was used for this test.

BDV tests indicate that 20 nm Al₂O₃ is more effective at improving BDV than 80 nm Al₂O₃, with an improvement of 113% compared to 99% for the latter. The analysis of Weibull probability at BDV indicates that 20 nm Al₂O₃ performs better, with improvements of 141%, 125% and 112% at probabilities of 1, 10 and 50%, respectively. The results of the PD tests using the PDPR pattern also show that 20 nm Al₂O₃ is superior. For the heat transfer test, 0.05 g/L of both diameters were used to ensure fair conditions, and again, the advantage was with 20 nm Al₂O₃ (23% vs 18%).

The effect of Al₂O₃ NP diameter (20 and 80 nm) on various properties of virgin and aged TO has been investigated experimentally in this paper to examine the effect of proposed NP on electrical improvement of TO.

The aim of this study is to report the effect of different content of calcium oxide on the process of electromelting magnesia.

The process of molten magnesia was analyzed by finite element simulation and proved by scanning electron microscope.

The results show that with the increase of CaO content, the maximum temperature appreciation increases from 3,616°C To 3,729°C, showing an approximate nonlinear evolution. Low thermal conductivity and low specific heat of CaO result in higher temperature. With the increase of CaO content and temperature, the maximum flow velocity of MgO slag increases from 0.043 to 1.34 mm/s. Under different initial CaO contents, the distribution trend of CaO volume fraction is basically the same, and the CaO volume fraction is evenly distributed between 50 and 225 mm in the furnace.

The influence of different contents of impurity calcium oxide on the process of electromelting magnesia was analyzed and a theoretical system was established.

This study analyzes the effects of competition and risk-taking behavior on the stability of commercial banks in Kenya.

An unbalanced panel dataset of 36 licensed commercial banks in Kenya for 2001–2020 was extracted from the published financial statements. A dynamic panel data analysis model, a two-step system generalized method of moments (GMM), was employed.

The results indicate that competition reinforces bank stability, whereas banks’ risk-taking behavior has an inverse relationship with strength.

The study confirms the competition-stability nexus, implying that measures may be implemented to foster competition among banks with reduced concentration. These measures may include, but are not limited to, reduced entry barriers and optimal capital requirements. Second, efforts should be made to ensure excessive risk-taking by banks. Employing an elaborate exposure monitoring system with clear warning signs is recommended.

This study is unique in several ways. First, it employs structural and nonstructural measures of competition and ex post standards of banks’ risk-taking behavior. Second, contrary to past studies, this study uses various firm-level measures of bank stability. Lastly, it provides essential empirical evidence from the context of a developing economy, whose institutional and macroeconomic environments differ significantly from those of a developed economy.

The purpose of this study is to introduce a new type of sensor which uses microwave metamaterials and direct-coupled split-ring resonators (DC-SRRs) to measure the dielectric properties of solid materials in real time. The sensor uses a transmission line with a bridge-type structure to measure the differential frequency, which can be used to calculate the dielectric constant of the material being tested. The study aims to establish an empirical relationship between the dielectric properties of the material and the frequency measurements obtained from the sensor.

In the proposed design, the opposite arm of the bridge transmission line is loaded by DC-SRRs, and the distance between DC-SRRs is optimized to minimize the mutual coupling between them. The DC-SRRs are loaded with the material under test (MUT) to perform differential permittivity sensing. When identical MUT is placed on both resonators, a single transmission zero (notch) is obtained, but non-identical MUTs exhibit two split notches. For the design of differential sensors and comparators based on symmetry disruption, frequency splitting is highly useful.

The proposed structure is demonstrated using electromagnetic simulation, and a prototype of the proposed sensor is fabricated and experimentally validated to prove the differential sensing principle. Here, the sensor is analyzed for sensitivity by using different MUTs with relative permittivity ranges from 1.006 to 10 and with a fixed dimension of 9 mm × 10 mm ×1.2 mm. It shows a very good average frequency deviation per unit change in permittivity of the MUTs, which is around 743 MHz, and it also exhibits a very high average relative sensitivity and quality factor of around 11.5% and 323, respectively.

The proposed sensor can be used for differential characterization of permittivity and also as a comparator to test the purity of solid dielectric samples. This sensor most importantly strengthens robustness to environmental conditions that cause cross-sensitivity or miscalibration. The accuracy of the measurement is enhanced as compared to conventional single- and double-notch metamaterial-based sensors.

Mohammad Azharuddin's arrival in professional cricket served, to quote Karl Marx, as a reform of consciousness that awakened the sport ‘from its dream about itself’. His expertise with the bat invoked the wide expanse of human sensorium, provoking reactions of shock and admiration among observers. In this chapter, I examine Azharuddin's life in cricket and public through a dialectical probing of the relationship between shock and aesthetics. Azhar and cricket appear as a productive terrain to carry out the analysis, as it pushes the possibility of what or who can be considered as a valid subject for theoretical scrutiny. Taking cues from Walter Benjamin and CLR James, I theorise the shock effects created by a cricketer most unusual. From his wristy wizardry with the bat to his appointment as captain of the Indian men's cricket team during the rise of Hindu nationalism in the country, Azharuddin's presence and popularity extended beyond the boundaries that are often imposed on a sportsperson. Through his involvement in the match-fixing scandal that was exposed at the turn of the 21st century, Azhar (the name by which he was popularly known) challenged the mores of a game that had emphasised Victorian notions of purity on and off the field. For the purposes of this chapter, I discuss how Azhar constructed a bodily discourse that pushes us to reassess our very notions of art and aesthetics.