Search results
1 – 10 of 23Jaw‐Ren Lin, Chi‐Ren Hung, Li‐Ming Chu, Wei‐Liang Liaw and Ping‐Hui Lee
In the present paper, the authors aim to analyze the non‐Newtonian effects of Rabinowitsch fluids on the squeeze film performances between wide parallel rectangular plates.
Abstract
Purpose
In the present paper, the authors aim to analyze the non‐Newtonian effects of Rabinowitsch fluids on the squeeze film performances between wide parallel rectangular plates.
Design/methodology/approach
Based on the cubic‐stress equation model, a nonlinear squeeze‐film Reynolds‐type equation has been derived. By using a small perturbation method, a closed‐form solution of the squeeze film characteristics is derived for the parallel plates considering the non‐Newtonian effects of cubic stresses.
Findings
Comparing with the Newtonian‐lubricant parallel plates, the effects of non‐Newtonian cubic‐stress flow rheology provide significant influences upon the squeeze film characteristics.
Originality/value
It is shown that the non‐Newtonian pseudoplastic behavior reduces the load capacity and the response time; however, the effects of non‐Newtonian dilatant lubricant provide an increase in the load‐carrying capacity and therefore lengthen the response time of parallel squeeze‐film plates.
Details
Keywords
N.B. Naduvinamani, Siddharam Patil and S.S. Siddapur
Nowadays, the use of Newtonian fluid as a lubricant is diminishing day by day, and the use of non-Newtonian fluids has gained importance. This paper presents an analysis of the…
Abstract
Purpose
Nowadays, the use of Newtonian fluid as a lubricant is diminishing day by day, and the use of non-Newtonian fluids has gained importance. This paper presents an analysis of the static characteristics of Rayleigh step slider bearing lubricated with non-Newtonian Rabinowitsch fluid, which has not been studied so far. The purpose of this paper is to derive the modified Reynolds equation for Rabinowitsch fluids for two regions and to obtain the optimum bearing parameters for the Rayleigh step slider bearings.
Design/methodology/approach
The governing equations relevant to the problem under consideration are derived. The modified Reynolds equation is derived, and it is found to be highly non-linear and hence small perturbation method is adopted to find solution.
Findings
From this study it is found that there is an increase in the load-carrying capacity, pressure and frictional coefficients for dilatant fluids as compared to the corresponding Newtonian case. Further, for dilatant lubricants the maximum load-carrying capacity is attained for the slightly larger values of entry region length of Rayleigh step bearing as compared to Newtonian and pseudoplastic lubricants.
Originality/value
Rabinowitsch fluid is used for the study of lubrication characteristics of Rayleigh step bearings. The author believes that the paper presents these results for the first time.
Details
Keywords
Cheng-Hsing Hsu, Jaw-Ren Lin, Lian-Jong Mou and Chia-Chuan Kuo
– The purpose of this paper is to present a theoretical study of non-Newtonian effects in conical squeeze-film plates that is based on the Rabinowitsch fluid model.
Abstract
Purpose
The purpose of this paper is to present a theoretical study of non-Newtonian effects in conical squeeze-film plates that is based on the Rabinowitsch fluid model.
Design/methodology/approach
A non-linear, modified Reynolds equation accounting for the non-Newtonian properties following the cubic stress law equation is derived. Through a small perturbation method, first-order closed-form solutions are obtained.
Findings
It is found that the non-Newtonian properties of dilatant fluids increase the load capacity and lengthen the response time as compared to the case using a Newtonian lubricant; however, the non-Newtonian behaviors of pseudoplastic lubricants result in reverse influences.
Originality/value
Numerical tables for squeeze-film loads of conical plates are also provided for engineering applications.
Details
Keywords
Pentyala Srinivasa Rao and Amit Kumar Rahul
This paper aims to investigate the effect of surface roughness (radial and azimuthal) and viscosity variation on a squeeze film of a conical bearing with a non-Newtonian lubricant…
Abstract
Purpose
This paper aims to investigate the effect of surface roughness (radial and azimuthal) and viscosity variation on a squeeze film of a conical bearing with a non-Newtonian lubricant by using Rabinowitsch fluid model.
Design/methodology/approach
The main objective is to determine the stochastic nonlinear modified Reynolds equation for rough conical bearing. Later, first-order closed-form solutions are obtained using a small perturbation method and are numerically solved using the Gauss quadrature method.
Findings
The findings of this paper, numerical calculations, are analyzed for pressure, load carrying capacity and response time. The simulated results indicate that the influence of surface roughness increases the pressure, load carrying capacity and response time, whereas the viscosity variation factor decreases the pressure, load and response time.
Originality/value
According to both types of surface roughness with viscosity variation, the performance of a squeeze film rough conical bearing was improved by using Rabinowitsch fluid model. As it is inevitable to consider viscosity variation for bearing designer, it leads to a long life period of conical bearing.
Details
Keywords
Jaw‐Ren Lin, Tsu‐Liang Chou and Ming‐Hsiung Ho
On the basis of the power‐law fluid model, the rheological effects of an isothermal incompressible non‐Newtonian laminar lubricating film on the steady and dynamic characteristics…
Abstract
Purpose
On the basis of the power‐law fluid model, the rheological effects of an isothermal incompressible non‐Newtonian laminar lubricating film on the steady and dynamic characteristics of finite slider bearings are presented in the absence of fluid inertia and cavitation.
Design/methodology/approach
To account for the motion that the pad undergoes prescribed small‐amplitude oscillations in a direction perpendicular to itself, the non‐Newtonian dynamic Reynolds equation including the squeezing‐action effect is obtained. Both the steady pressure and the perturbed pressure are numerically solved and used to evaluate the steady‐state performance and dynamic characteristics.
Findings
According to the results, higher steady load‐carrying capacity, dynamic stiffness and damping coefficients are predicted for the finite bearing with small wedge parameter and high viscosity‐shear rate index. In addition, the effects of non‐Newtonian power‐law lubricants on the bearing characteristics are more pronounced when the bearing width becomes large.
Originality/value
The paper provides useful information on the dynamic characteristics of finite bearings lubricated by a non‐Newtonian power‐law fluid.
Details
Keywords
Cheng Xiong, Bo Xu and Zhenqian Chen
This study aims to investigate the rarefaction effects on flow and thermal performances of an equivalent sand-grain roughness model for aerodynamic thrust bearing.
Abstract
Purpose
This study aims to investigate the rarefaction effects on flow and thermal performances of an equivalent sand-grain roughness model for aerodynamic thrust bearing.
Design/methodology/approach
In this study, a model of gas lubrication thrust bearing was established by modifying the wall roughness and considering rarefaction effect. The flow and lubrication characteristics of gas film were discussed based on the equivalent sand roughness model and rarefaction effect.
Findings
The boundary slip and the surface roughness effect lead to a decrease in gas film pressure and temperature, with a maximum decrease of 39.2% and 8.4%, respectively. The vortex effect present in the gas film is closely linked to the gas film’s pressure. Slip flow decreases the vortex effect, and an increase in roughness results in the development of slip flow. The increase of roughness leads to a decrease for the static and thermal characteristics.
Originality/value
This work uses the rarefaction effect and the equivalent sand roughness model to investigate the lubrication characteristics of gas thrust bearing. The results help to guide the selection of the surface roughness of rotor and bearing, so as to fully control the rarefaction effect and make use of it.
Details
Keywords
Li-Ming Chu, Jaw-Ren Lin and Cai-Wan Chang-Jian
The modified Reynolds equation for non-Newtonian lubricant is derived using the viscous adsorption theory for thin-film elastohydrodynamic lubrication (TFEHL) of circular…
Abstract
Purpose
The modified Reynolds equation for non-Newtonian lubricant is derived using the viscous adsorption theory for thin-film elastohydrodynamic lubrication (TFEHL) of circular contacts. The proposed model can reasonably calculate the phenomenon in the thin-film lubrication (TFL) unexplained by the conventional EHL model. The differences between classical EHL and TFEHL with the non-Newtonian lubricants are discussed.
Design/methodology/approach
The power-law lubricating film between the elastic surfaces is modeled in the form of three layers: two adsorption layers on each surface and one middle layer. The modified Reynolds equation with power-law fluid is derived for TFEHL of circular contacts using the viscous adsorption theory. The finite difference method and the Gauss–Seidel iteration method are used to solve the modified Reynolds equation, elasticity deformation, lubricant rheology equations and load balance equations simultaneously.
Findings
The simulation results reveal that the present model can reasonably calculate the pressure distribution, the film thickness, the velocity distribution and the average viscosity in TFL with non-Newtonian lubricants. The thickness and viscosity of the adsorption layer and the flow index significantly influence the lubrication characteristics of the contact conjunction.
Originality/value
The present model can reasonably predict the average viscosity, the turning point and the derivation (log film thickness vs log speed) phenomena in the TFEHL under constant load conditions.
Details
Keywords
Mauricio Pérez Giraldo, Mauricio Vasquez, Alejandro Toro, Robison Buitrago-Sierra and Juan Felipe Santa
This paper aims to develop a stable gel-type lubricant emulating commercial conditions. This encompassed rheological and tribological assessments, alongside field trials on the…
Abstract
Purpose
This paper aims to develop a stable gel-type lubricant emulating commercial conditions. This encompassed rheological and tribological assessments, alongside field trials on the Medellín tram system.
Design/methodology/approach
The gel-type lubricant with graphite and aluminum powder is synthesized. Rheological tests, viscosity measurements and linear viscoelastic regime assessments are conducted. Subsequently, tribological analyses encompassing four-ball and twin disc methods are executed. Finally, real-world testing is performed on the Medellín tram system.
Findings
An achieved lubricant met the stipulated criteria, yielding innovative insights into the interaction of graphite and aluminum powder additives under varying tests.
Originality/value
Novel findings are unveiled regarding the interaction of graphite and aluminum powder additives in tribological, rheological and real-world trials. In addition, the wear behavior of polymers is observed, along with the potential utilization of such additives in tramway systems.
Details
Keywords
Lawrance G., P. Sam Paul and Varadarajan A.S.
In the internal turning process, tool life and work piece quality are greatly influenced by the generation of heat in the cutting zone. During machining, cutting fluids are…
Abstract
Purpose
In the internal turning process, tool life and work piece quality are greatly influenced by the generation of heat in the cutting zone. During machining, cutting fluids are applied at the cutting zones to reduce heat generation and enhance tribological properties. However, in the boring process, cutting fluids cannot be applied at cutting zone properly, and wastage of cutting fluid is a threat to the ecology and personnel health. Hence, application of semisolid lubricant in the boring process is considered as an innovative technique for temperature reduction in cutting zone because of its eco-friendly system, which also has a higher ability of biodegradability. This paper aims to study the influence of semisolid lubricants comprising of grease,graphite, aluminium oxide in different composition applied at a tool–chip,tool–work interface using a semisolid lubricant applicator applied with varying pressure.
Design/methodology/approach
In the present study, the cutting performance during boring of AISI4340 steel is enhanced through the application of semisolid lubricant with different composition of grease, graphite and aluminium oxide applied at tool-work and tool-chip interface with varying pressure using semisolid lubricant applicator.
Findings
The results show that use of semisolid lubricant like grease, graphite and nano aluminium oxide at tool-chip interface with maximum pressure reduces cutting temperature, tool vibration, cutting force and surface roughness.
Originality/value
Reduce cutting temperature, tool vibration, cutting force and surface roughness.
Details
Keywords
Thameem Basha Hayath, Sivaraj Ramachandran, Ramachandra Prasad Vallampati and O. Anwar Bég
Generally, in computational thermofluid dynamics, the thermophysical properties of fluids (e.g. viscosity and thermal conductivity) are considered as constant. However, in many…
Abstract
Purpose
Generally, in computational thermofluid dynamics, the thermophysical properties of fluids (e.g. viscosity and thermal conductivity) are considered as constant. However, in many applications, the variability of these properties plays a significant role in modifying transport characteristics while the temperature difference in the boundary layer is notable. These include drag reduction in heavy oil transport systems, petroleum purification and coating manufacturing. The purpose of this study is to develop, a comprehensive mathematical model, motivated by the last of these applications, to explore the impact of variable viscosity and variable thermal conductivity characteristics in magnetohydrodynamic non-Newtonian nanofluid enrobing boundary layer flow over a horizontal circular cylinder in the presence of cross-diffusion (Soret and Dufour effects) and appreciable thermal radiative heat transfer under a static radial magnetic field.
Design/methodology/approach
The Williamson pseudoplastic model is deployed for rheology of the nanofluid. Buongiorno’s two-component model is used for nanoscale effects. The dimensionless nonlinear partial differential equations have been solved by using an implicit finite difference Keller box scheme. Extensive validation with earlier studies in the absence of nanoscale and variable property effects is included.
Findings
The influence of notable parameters such as Weissenberg number, variable viscosity, variable thermal conductivity, Soret and Dufour numbers on heat, mass and momentum characteristics are scrutinized and visualized via graphs and tables.
Research limitations/implications
Buongiorno (two-phase) nanofluid model is used to express the momentum, energy and concentration equations with the following assumptions. The laminar, steady, incompressible, free convective flow of Williamson nanofluid is considered. The body force is implemented in the momentum equation. The induced magnetic field strength is smaller than the external magnetic field and hence it is neglected. The Soret and Dufour effects are taken into consideration.
Practical implications
The variable viscosity and thermal conductivity are considered to investigate the fluid characteristic of Williamson nanofluid because of viscosity and thermal conductivity have a prime role in many industries such as petroleum refinement, food and beverages, petrochemical, coating manufacturing, power and environment.
Social implications
This fluid model displays exact rheological characteristics of bio-fluids and industrial fluids, for instance, blood, polymer melts/solutions, nail polish, paint, ketchup and whipped cream.
Originality/value
The outcomes disclose that the Williamson nanofluid velocity declines by enhancing the Lorentz hydromagnetic force in the radial direction. Thermal and nanoparticle concentration boundary layer thickness is enhanced with greater streamwise coordinate values. An increase in Dufour number or a decrease in Soret number slightly enhances the nanofluid temperature and thickens the thermal boundary layer. Flow deceleration is induced with greater viscosity parameter. Nanofluid temperature is elevated with greater Weissenberg number and thermophoresis nanoscale parameter.
Details