Search results

Firefighter Personal Protective Equipment (PPE) is the only barrier between the firefighter and hazardous environment. Gloves are a crucial component of the multi-component PPE. Over time the gloves have reduced the intensity of hand injuries, yet further improvement in terms of material selection and glove design is required to strike the balance between protection and comfort. Focusing on the material aspect, the purpose of this study is to present literature analysis on material selection and testing for firefighter gloves.

The study conducted a literature analysis on material selection and characterization of firefighter PPE. The review summarizes and evaluates past work addressing the characterization of firefighter gloves in accordance with NFPA 1971 requirements and points out found research gaps to aid with foundation of future research.

The study summarizes several research works to inform readers about the material selection and characterization of firefighter gloves. Based on the analyzed literature, the study resulted in material specification sheets for firefighter gloves. The developed material specification sheets provide information in terms of crucial material properties to be incorporated for accurate functioning of firefighter gloves, testing methods to validate those material properties and materials from analyzed literature exhibiting desired properties.

With large research addressing firefighter PPE, only limited studies focus specifically on gloves. Thus, this study provides a literature analysis covering material selection and testing for gloves. A consolidated firefighter gloves material specification document, which does not appear to be available in the literature, will provide a foundation for the development and characterization of firefighter gloves to better serve the functions along with ensuring user comfort.

The purpose of this study is to predict the thermal protective performance (TPP) of flame-retardant fabric more economically using machine learning and analyze the factors affecting the TPP using model visualization.

A total of 13 machine learning models were trained by collecting 414 datasets of typical flame-retardant fabric from current literature. The optimal performance model was used for feature importance ranking and correlation variable analysis through model visualization.

Five models with better performance were screened, all of which showed R2 greater than 0.96 and root mean squared error less than 3.0. Heat map results revealed that the TPP of fabrics differed significantly under different types of thermal exposure. The effect of fabric weight was more apparent in the flame or low thermal radiation environment. The increase in fabric weight, fabric thickness, air gap width and relative humidity of the air gap improved the TPP of the fabric.

The findings suggested that the visual analysis method of machine learning can intuitively understand the change trend and range of second-degree burn time under the influence of multiple variables. The established models can be used to predict the TPP of fabrics, providing a reference for researchers to carry out relevant research.

The findings of this study contribute directional insights for optimizing the structure of thermal protective clothing, and introduce innovative perspectives and methodologies for advancing heat transfer modeling in thermal protective clothing.

Perspiration and heat are produced by the body and must be eliminated to maintain a stable body temperature. Sweat, heat and air must pass through the fabric to be comfortable. The cloth absorbs sweat and then releases it, allowing the body to chill down. By capillary action, moisture is driven away from fabric pores or sucked out of yarns. Convectional air movement improves sweat drainage, which may aid in body temperature reduction. Clothing reduces the skin's ability to transport heat and moisture to the outside. Excessive moisture makes clothing stick to the skin, whereas excessive heat induces heat stress, making the user uncomfortable. Wet heat loss is significantly more difficult to understand than dry heat loss. The purpose of this study is to provided a good compilation of complete information on wet thermal comfort of textile and technological elements to be consider while constructing protective apparel.

This paper aims to critically review studies on the thermal comfort of textiles in wet conditions and assess the results to guide future research.

Several recent studies focused on wet textiles' impact on comfort. Moisture reduces the fabric's thermal insulation value while also altering its moisture characteristics. Moisture and heat conductivity were linked. Sweat and other factors impact fabric comfort. So, while evaluating a fabric's comfort, consider both external and inside moisture.

The systematic literature review in this research focuses on wet thermal comfort and technological elements to consider while constructing protective apparel.

The purpose of this paper is to investigate the distribution characteristics of airflow in mine ventilation suits with different pipeline structures when the human body is bent at various angles. On this basis, the stress points are extracted to investigate the pressure variation of a ventilation suit under different ventilation rates and pipeline structures.

Based on the three-dimensional human body scanner, portable pressure test and other instruments, a human experiment was conducted in an artificial cabin. The study analyzed and compared the distribution characteristics of clearance under three different pipeline structures, as well as the pressure variation of the ventilation suit.

The study found that the clearance in front of two pipeline structures gradually increased in size as the degree of bending increased, and there was minimal clearance in the chest and back. The longitudinal structure exhibits a significant decrease in clearance compared to the spiral structure. The pressure value of the spiral pipeline structure with the same ventilation volume is low, followed by the transverse structure, while the longitudinal structure has the highest pressure value. The increase in clothing pressure value of a spiral pipeline structured ventilation suit with varying ventilation volumes is minimal.

The ventilation suit has a promising future as a type of personal protective equipment for mitigating heat damage in mines. It is of great value to study the pipeline structure of the ventilation suit for human comfort.

An increasing aging population and an increasing number of people suffering from musculoskeletal disorders have increased the demand for wearable robots. Comfortable, wearable robots that can be worn like clothing are currently being investigated. However, the embedded components may be displaced owing to the flexibility of the fabrics, which can lower the sensing accuracy and limit natural body movements. This study aims to develop clothing-type wearable platforms to minimize the displacement of embedded components such as sensors and actuators while maintaining comfort.

Four designs were developed using materials with different seam lines, that can serve as anchoring details, and flatlock stitches considering body movements and musculoskeletal structures. The wear evaluation experiment was filmed using a speed camera and analyzed using the TimeViewer software and SPSS 26.0. Based on these results, four clothing-type wearable platform designs were developed.

The variation in the location of a point in the armhole among the designs was marginal. Participants were satisfied with the functionality, practicality, wearability, efficiency and ease of use of the developed designs. A final clothing-type wearable platform was developed by applying a design with the least change in location, a suitable design for each area and wear comfort.

The results of this study contribute to the development of wearable robots by establishing clothing design data to minimize changes in sensor and actuator movements.

Personal Protective Equipment plays an inevitable part in the current scenario of pandemics in the world. A novel coronavirus, Severe Acute Respiratory Syndrome-Corona Virus-2 (SARS-Cov 2), began as an outbreak of pneumonia in Wuhan, China, in late December 2019, and quickly spread worldwide. It quickly escalated into an international public health crisis. This opened up the high demand for the innovation and research of new materials in the Personal Protective Equipment industry.

PubMed, Embase and Google Scholar were searched for relevant literature regarding personal protective equipment and the information was organized in a systematic way.

There are no adequate number of studies taken up in the field of use of textiles in medical applications especially with PPEs.

This structured review will generate a sense of the significance of using PPE for controlling pandemics and also awaken need for additional research and innovations in this area.

The authorities of the management should take timely intervention in choosing the right material for their PPE in their hospitals. Hence health care professionals teams have an inevitable role in preventing the adverse environmental impact due to the inadvertent disposal of PPEs.

There is a lack of systematic way of disposing contaminated single-use face masks in a safe, environmentally acceptable manner. The dumping of single-use PPE in domestic garbage has had an adverse effect on the environment. Mismanaged plastic waste endangers the health of ecosystems by polluting marine and terrestrial environments, posing a significant risk of ingestion or injury to animals and contaminating habitats.

This review article provides an in-depth review of the use of different materials in PPE and challenges regarding its long-term use and implications on the environment.

This study aims to develop a safe, wearable clothing system that combines visibility-enhancing and emergency–accident-responding functions for two-wheeled vehicle (TWV) users' safety assistance.

First, the wearable system (WS) allowing users to control turn signals, brake lights and emergency flasher only with head movements was developed. Second, multiconnected systems were developed between WSs and a smartphone application (AS), providing accident occurrence recognition, driving photo capture–storage and emergency notification functions. Third, usability testing in each function was performed to assess the operability of the systems.

The intuitive interface, which uses head movement as gesture commands, was effectively operated for controlling turn signals, brake lights and emergency flasher when driving, despite differences in user physique and boarding structure among TWVs. In addition, using Bluetooth low energy and Wi-Fi protocols simultaneously can establish automatic accident recognition–notification and driving photo capture–storage–display functions by linking two WSs with one AS.

This study presents a case using relatively accessible technologies within the fashion industry to improve users' safety and provide fundamental data for convergence education for smart fashion products, highlighting the significance of this study in this convergence era.

The WSs and the AS of a TWV user visually evoke the attention of other drivers and pedestrians, reducing the risk of accidents; social contribution regarding public safety will be possible by allowing the system to autonomously inform emergencies and receive emergency medical treatment quickly when the accident occurred.

Inaccurate capturing and processing of customer requirements result in negative economic and ecological effects. Digital twins of customer demands promise to remedy these issues. However, successful implementation necessitates users' technology acceptance. This study contrasts three hierarchical digital twin levels with different degrees of user integration and examines determinants for their respective acceptance.

A structural equation model is applied in a comparative manner, considering different levels of digital twin radicalness. A multidimensional approach is used to measure attitudes towards usage. Data are collected in the context of organisational supply management.

Results show harmonious effects across digital twin levels. This indicates that technological radicality plays only a subordinate role when assessing acceptance determinants such as user perception on ease of use, usefulness, trust and risk.

Rather than focussing solely on technological factors, findings suggest that users prioritise the actual outcome and efficiency of the system. This perspective offers practical implications for organisations seeking to implement advanced systems and emphasises the significance of user perceptions beyond technological features.

The societal impact of this research are an appreciation of customer roles in the supply chain where an enhanced detection of customer needs and preferences aligns businesses with the dynamic and evolving demands of a diverse and a continuously environmentally-conscious consumer base.

This study applies a measurement model for technology acceptance in a unique and multidimensional manner. Thereby, a comparative analysis of user perceptions across different digital twin levels sheds more light on a nascent, promising and underexplored technological method. This interdisciplinary research combined knowledge from the supply chain management and management information systems fields by highlighting key factors for the adoption of complex technological methods.

Stab-resistant body armor (SRBA) is used to protect the body from sharp knives. However, most SRBA materials currently have the disadvantages of large weight and thickness. This paper aims to prepare lightweight and high-performance SRBA by 3D printing truss structure and resin-filling method.

The stab resistance truss structure was prepared by the fused deposition modeling method, and the composite structure was formed after filling with resin for dynamic and quasi-static stab tests. The optimized structural plate can meet the standard GA68-2019. Digital image correlation technology was used to analyze the local strain changes during puncture. The puncture failure mode was summarized by the final failure morphologies. The explicit dynamics module in ANSYS Workbench was used to analyze the design of the overlapped structure stab resistance process in this paper.

The stab resistance performance of the 3D-printed structural plate is affected by the internal filling pattern. The stab resistance performance of 3D-printed structural parts was significantly improved after resin filling. The 50%-diamond-PLA-epoxy, with a thickness of only 5 mm was able to meet the stab resistance standard. Resins are used to increase the strength and hardness of the material but also to increase crack propagation and reduce the toughness of the material. The overlapping semicircular structure was inspired by the exoskeleton structure of the demon iron beetle, which improved the stab resistance between gaps. The truss structure can effectively disperse stress for toughening. The filled resin was reinforced by absorbing impact energy.

The 3D-printed resin-filled truss structure can be used to prepare high-performance stab resistance structural plates, which balance the toughness and strength of the overall structure and ultimately reduce the thickness and weight of the SRBA.

The total defence (TD) concept constitutes a joint endeavour between the military forces and civil defence structures within a TD state. Logistics is essential for such joint collaboration to work; however, the mismatch between military and civil defence logistics structures poses challenges for such joint collaboration. The purpose of this paper is to identify logistics concept areas within the TD framework that allow for military and civil defence collaborations from a logistics operations perspective.

Pattern-matching analysis is used to compare patterns found in the investigated case with those prescribed from the literature and predicted to occur. The study seeks to identify logistics concepts within TD from the literature and from the events describing the Swedish response to the Covid-19 pandemic. Pattern matching thus allows for the reconciliation of logistics concepts from the literature to descriptions of how the response was handled, albeit under a TD framework.

Findings show quite distinct foci between the theoretical and observational realms in terms of logistics applications. While the theoretical realm identifies four main logistics concepts, the observational realm identifies five logistics conceptual themes. This goes on to show an incongruence between the military and civil parts of the TD.

This study provides basis for further research into the applications and management of logistics activity within TD and emergency response.

Logistics applications within TD have not, until now, received much attention in the literature. Given this knowledge gap, this study is of original value.