Search results

This study aims to empirically validate five propositions about the benefits of three-dimensional (3D) visualizations for the management of subsurface utility projects. Specifically, the authors validate whether benefits from 3D in the literature of building construction project management also apply to subsurface utility projects and map them using a taxonomy of project complexity levels.

A multiple case study of three utility construction projects was carried out during which the first author was involved in the daily work practices at a utility contractor. 3D visualizations of existing project models were developed, and design and construction meetings were conducted. Practitioners' interactions with and reflections on these 3D visualizations were noted. Observational data from the three project types were matched with the five propositions to determine where benefits of 3D visualizations manifested themselves.

Practitioners found that 3D visualizations had most merit in crowded urban environments when constructing rigid pipelines. All propositions were validated and evaluated as beneficial in subsurface utility projects of complexity level C3. It is shown that in urban projects with rigid pipelines (project with the highest complexity level), 3D visualization prevents misunderstanding or misinterpretations and increases efficiency of coordination. It is recommended to implement 3D visualization approaches in such complex projects

There is only limited evidence on the value 3D visualizations in managing utility projects. This study contributes rich empirical evidence on this value based on a six-month observation period at a subsurface contractor. Their merit was assessed by associating 3D approaches with project complexity levels, which may help utility contractors in strategically implementing 3D applications.

Managing a project involves taking a number of critical decisions that can have a crucial impact on the success or failure of the initiative. The analytical definition and visualization of the main components of a project can support project managers engaged to address the right issues at the right time. This article aims to identify crucial crossroads in the management of a project and to provide a visual representation of knowledge involved into a system of project components and decisions.

A design science process is adopted to define the initial goals and requirements and to develop the knowledge visualization framework. Expert feedback is also gathered to obtain a preliminary validation of the framework.

Moving from a system view of project dimensions, we identify eight types of strategic decisions, i.e. growth, problem shifting, goals balancing, escalation, rewarding, resource allocation, problem fixing and cooperation. We then present a visualization map of project decision making addressing six categories of knowledge (i.e. “what-knowledge”, “how-knowledge”, “who-knowledge”, “why-knowledge”, “what for-knowledge”, “when-knowledge”).

The framework needs further theoretical refinement in terms of more fine-grained decision types, other determinants and the reciprocal influence in the management of project activities.

The article can support project managers attempting to build a comprehensive view of project decisions, and it can be a basis to develop novel types of knowledge management systems for project-related applications.

The article proposes a new approach to sustain strategic decision making in project management by adopting a knowledge visualization view. Moreover, it provides an operational tool for managers and analysts at different levels engaged into the management of a project.

This paper aims to describe the popular trends and methods and ICT tools used for mapping and visualization of scientific domains as a research methodology which is attracting more and more interest from scientific information and science studies professionals. Science mapping or bibliometric mapping is a spatial representation of how disciplines, fields, specialties and individual documents or authors. The researchers analysed Bibexel, Pajek, VOSViewer, programmes used for processing and visualization of bibliographic and bibliometric data, within the framework of the implementation of IRNet research network project and activities and presented several examples of visualisation.

Among the main indicators of research effectiveness – bibliometric indicators – is a powerful information tool to support the development of science. Practical research methods were prepared using the programs: Bibexel (metadata analyses), program Pajek: graph editing and visualization of the graph structure of co-authorship – using the method of Kamada-Kawai and VOSviewer: a computer program for creating maps based on network data and for visualizing and exploring these maps. The main features of VOSviewer can be summarized for creating maps based on network data, visualizing and exploring maps.

The cited references and keywords are used to analyse in particular the intellectual base used by the research field or to analyse documents that cite the same references.

The authors of the paper, who are researchers of the European IRNet project and international research network, described and analysed certain bibliographic results of these activities using methods of mapping and visualization of scientific domains.

The construction industry produces voluminous quantitative data. Much of this data is created during the controls phase of projects and relates to cost, schedule, and administrative information. Recent storage and processing advances in computers as well as display capabilities afforded by computer graphics increase the opportunity to monitor projects fundamentally different from existing project control systems. However, changes in project control methods have been slow to evolve. The lack of a fundamental model of project control data representation contributes to the inadequate application and implementation of visual tools in project control methods. Difficulties associated with the graphical representation of data can be traced to the diversity of skills required in creating visual information displays. Owing to the reality that not all engineers/constructors possess these attributes in great strength, streamlining the process of how to best visualize data is important. Visual representations of data hold great potential for reducing communication difficulties fostered by industry fragmentation. However, without information structure, organization, and visual explanations, the massive amount of data available to project managers results in information overload. Therefore, improved information displays are needed to overcome the possibility of information overload with the capability of human perception. This paper discusses research to create a framework for visual representation of construction project data. Underlying visualization theory, the visual framework, and a detailed implementation are provided.

New computer-assisted techniques for visualizing data are evolving in a number of areas in transportation. For example, in engineering, 3D visualization and microsimulation techniques are being applied for the identification and evaluation of geometric and operational solutions for improving visually impaired pedestrian access to roundabouts and channelized turn lanes. For planning, visualization is being used for corridor analysis. Data visualization is being used as a tool for improving decision-making within transit agencies, as well as a tool for understanding truck trip generation on highways. Many of these new techniques take advantage of archived intelligent transportation systems (ITS) data. Examples of other innovative data sources include global positioning systems (GPS), geographic information systems (GIS), computer-aided design (CAD), and a variety of visualization tools available for use with travel survey data. As these various techniques and software applications move forward, consideration needs to be given to how the “lessons learned” from these applications can facilitate the use of data visualization techniques for travel survey data analysis and decision-making.

In recent years, augmented reality (AR) has shown its potential to assist various construction activities. Its use commonly requires additional refinement to be integrated into the building information modeling (BIM) process. Nevertheless, few studies have investigated AR implementation in BIM-enabled projects because of numerous challenges related to its implementation. This study aims to investigate the implementation of AR in construction and identify the critical mechanisms for implementing BIM-AR successfully.

A mixed methodology was adopted for this study. First, this work presents a bibliometric analysis covering articles obtained from Scopus database published between 2000 and 2022. A sample size of 65 research papers pertinent to AR in construction was analyzed using VOSviewer software. Second, a participatory case study was conducted for a BIM-enabled project in China to gain insight into how BIM-AR implementation in construction is achieved.

The findings from the bibliometric analysis show an increasing interest in AR research within construction. The results indicate that AR research focuses on four clusters: real-time communication, project management, construction activities and education. Findings from the case study provide an empirical experience of AR application scenarios in a BIM-enabled project. Concomitantly, 15 critical success factors that influence BIM-AR implementation were finally identified and demonstrated.

This study provides a rich insight into the understanding and awareness of implementing AR. First, the findings are beneficial to construction practitioners and researchers because they provide a concentrated perspective of AR for emerging activities in the construction industry. Second, the results obtained from the case study could provide a useful guide for effectively implementing AR in a BIM-enabled construction project. Overall, this study may stimulate further research on AR-related studies in construction, such as BIM integration, factor analysis and construction education.

Urban renewal is a multifaceted activity that involves numerous actors, software, and types of data. Design communication tools play an important role in this process. Visual information helps to outline, understand, and choose sustainable solutions for problems in the design, while visual tools should be able to diminish professional differences and establish a common language. Recent 3D geo-technologies offer a great variety of new tools that significantly enrich visualisation possibilities and allow for flexible switching between different 3D representations. However, studies have indicated that particular representations create different perceptions in professional compared to non-professional individuals. This paper discusses the specifics of urban renewal processes in the Netherlands and investigates recently developed 3D geo-information technology, and more specifically multiple 3D representations, that can support this task. The concept of LOD, which uses five levels of information, was evaluated as a very promising approach to agree on abstractions and representations in the different renewal phases. The study did not reveal a lack of digital possibilities for visualisation, but instead showed that the simultaneous visualisation of the proposed alternatives should be a priority. This investigation did reveal that different levels of interactivity could be used for the presentation and communication of project alternatives.

The purpose of this research is to develop a generic framework of a digital twin (DT)-based automated construction progress monitoring through reality capture to extended reality (RC-to-XR).

IDEF0 data modeling method has been designed to establish an integration of reality capturing technologies by using BIM, DTs and XR for automated construction progress monitoring. Structural equation modeling (SEM) method has been used to test the proposed hypotheses and develop the skill model to examine the reliability, validity and contribution of the framework to understand the DRX model's effectiveness if implemented in real practice.

The research findings validate the positive impact and importance of utilizing technology integration in a logical framework such as DRX, which provides trustable, real-time, transparent and digital construction progress monitoring.

DRX system captures accurate, real-time and comprehensive data at construction stage, analyses data and information precisely and quickly, visualizes information and reports in a real scale environment, facilitates information flows and communication, learns from itself, historical data and accessible online data to predict future actions, provides semantic and digitalize construction information with analytical capabilities and optimizes decision-making process.

The research presents a framework of an automated construction progress monitoring system that integrates BIM, various reality capturing technologies, DT and XR technologies (VR, AR and MR), arraying the steps on how these technologies work collaboratively to create, capture, generate, analyze, manage and visualize construction progress data, information and reports.

The development of smart cities (SCs) is a costly process as it requires the implementation of physical infrastructure to meet the demand for data collection. On the other hand, there are open government data (OGD) that are open and free, and can be a first step from the current city evolution to SCs at a more affordable cost. However, these data are available in a decentralized way, in different formats and granularities. To date, the authors have not found any literature work that performs the centralization of OGDs on a single platform. The purpose of this paper is provide a centralized OGD platform.

This work investigates the state-of-the-art literature from the OGD, establishes the research question, design and develop the platform for OGD and accomplish the validation of the platform.

Through the validations of the platform, advantages were observed in relation to productivity gain for the development of solutions, in the SC context, using the proposed platform.

The data have been collected in a manual way but for future works, the authors will use the web-crawler for the collection of data.

One town hall (Sorocaba) is interested in using the platform to analyze the data usage in the simple way and compare with the other nearby towns.

It is a recent work in literature using OGD, and there is no work that centralizes the information about several town halls to provide comparison between them and improve the decision-making.

This research aims to identify and measure the correlations between building information modelling (BIM) and lean construction (LC) principles at the design and construction phases.

The study investigates BIM-LC principles correlations using the Istanbul Grant Airport (IGA) as a case study. The Delphi technique, performed quantitatively, contributes to the identification and quantification of a set of correlations between 11 selected BIM uses and 13 LC principles, which are supported with practical examples from the case study.

Together, the two research methods provide an evidence-based approach to understand the correlations between BIM and LC. The correlation analysis results in 46 correlations, and the correlations between the LC principles and BIM uses are intensified with the LC principles.

A quantitative understanding BIM use and LC principles correlations and appreciation of their specific uses can guide the practical implementation of BIM and LC, especially in large and mega projects.

BIM and LC practices represent approaches to improve performance in construction projects. While BIM has both information technology (IT) and process perspectives, the LC approach is mainly a process and product-oriented philosophy for project efficiency, effectiveness and the elimination of non-value-adding activities and waste. Many studies have investigated how the two approaches complement each other and concluded that their combined implementation in projects can improve efficiency and effectiveness. However, to date an analytical and granular investigation identifying and measuring correlations between BIM and LC based on empirical data is lacking. This paper fills that gap with an evidence-based analysis of the tightness of coupling and correlations between BIM uses and LC principles.