Search results
1 – 10 of over 5000Yaser Gamil and Ismail Abd Rahman
The purpose of this paper is to develop a structural relationship model to study the relationship between causes and effects of poor communication and information exchange in…
Abstract
Purpose
The purpose of this paper is to develop a structural relationship model to study the relationship between causes and effects of poor communication and information exchange in construction projects using Smart-PLS.
Design/methodology/approach
The first method of this research is to identify the causes and effects factors of poor communication in construction projects from the extant of literature. The data used to develop the model was collected using a questionnaire survey, which targeted construction practitioners in the Malaysian construction industry. A five-point Likert type scale was used to rate the significance of the factors. The factors were classified under their relevant construct/group using exploratory factor analysis. A hypothetical model was developed and then transformed into Smart-PLS in which the hypothetical model suggested that each group of the cause factors has a direct impact on the effect groups. The hypothesis was tested using t-values and p-values. The model was assessed for its inner and outer components and achieved the threshold criterion. Further, the model was verified by engaging 14 construction experts to verify its applicability in the construction project setting.
Findings
The study developed a structural equation model to clarify the relationships between causes and effects of poor communication in construction projects. The model explained the degree of relationships among causes and effects of poor communication in construction projects.
Originality/value
The published academic and non-academic literature introduced many studies on the issue of communication including the definitions, importance, barriers to effective communication and means of poor communication. However, these studies ended up only on the general issue of communication lacking an in-depth investigation of the causes and effects of poor communication in the construction industry. The study implemented advanced structural modeling to study the causes and effects. The questionnaire, the data and concluding results fill the identified research gap of this study. The addressed issue is also of interest because communication is considered one of the main knowledge areas in construction management.
Details
Keywords
A key factor adversely affecting contractor social networking performance is the improper handling and information management of contractor’s services delivery on websites…
Abstract
Purpose
A key factor adversely affecting contractor social networking performance is the improper handling and information management of contractor’s services delivery on websites. Contractor social networking is particularly problematic on industrialised building system (IBS) infrastructure maintenance projects where contractor’s certified quality product and firms are not matched with maintenance specialisation services. The paper aims to discuss this issue.
Design/methodology/approach
This paper reports on the early stages of research which is developing a new information and communications technology (ICT)-based approach to managing contractor social networking on IBS infrastructure maintenance schemes. As a precursor to this work, the paper reviews current contractor social networking websites practices on IBS infrastructure maintenance projects and explores the ICT tools and techniques currently being employed on such projects.
Findings
The findings reveal the need for more sophisticated contractor social networking websites solutions which accord with the needs of IBS infrastructure maintenance schemes.
Originality/value
The paper concludes by presenting a research framework for developing such a system in the future.
Details
Keywords
Oluseye Olugboyega and Abimbola Windapo
BIM research to date has in general zeroed in on featuring the significance of BIM-enabled integration and collaboration (BIMIC) rather than giving exact proof of its occurrence…
Abstract
Purpose
BIM research to date has in general zeroed in on featuring the significance of BIM-enabled integration and collaboration (BIMIC) rather than giving exact proof of its occurrence. Accordingly, this research quantitatively explored the determinants of BIMIC in South Africa.
Design/methodology/approach
This research conceptualized a four-pillar model of BIM-enabled integration and collaboration. The speculations in the model were examined using SEM-MLE.
Findings
The aftereffects of the SEM-MLE demonstrated that network communication, knowledge sharing, and transfer, information sharing and exchange and trust-based relationships are critical determinants of BIMIC. The model's prescient power demonstrates an acceptable validity, and the boundary gauges showed that all the hypotheses were measurably huge.
Research limitations/implications
This research gives a hypothetical premise for further investigation of BIMIC by supporting the postulations on the occurrence of collaboration and integrations among the BIM-SCM.
Practical implications
The idea investigated involving SEM in this research gives a holistic view to the BIM managers in arranging BIM-based activities and overseeing BIM cycles and supply chain members. It likewise offers rules and structures for accomplishing and overseeing integration and collaboration among the BIM supply chain members.
Originality/value
Despite 20 years of exploration on the BIM concept and adoption, no idea has been given to clarify the determinants of integration and collaboration as a BIM cycle. The four-pillar model of BIMIC created and tested in this research clarified BIMIC and contributed a new model to the current literature on the BIM process.
Details
Keywords
Sepehr Alizadehsalehi and Ibrahim Yitmen
The purpose of this research is to develop a generic framework of a digital twin (DT)-based automated construction progress monitoring through reality capture to extended reality…
Abstract
Purpose
The purpose of this research is to develop a generic framework of a digital twin (DT)-based automated construction progress monitoring through reality capture to extended reality (RC-to-XR).
Design/methodology/approach
IDEF0 data modeling method has been designed to establish an integration of reality capturing technologies by using BIM, DTs and XR for automated construction progress monitoring. Structural equation modeling (SEM) method has been used to test the proposed hypotheses and develop the skill model to examine the reliability, validity and contribution of the framework to understand the DRX model's effectiveness if implemented in real practice.
Findings
The research findings validate the positive impact and importance of utilizing technology integration in a logical framework such as DRX, which provides trustable, real-time, transparent and digital construction progress monitoring.
Practical implications
DRX system captures accurate, real-time and comprehensive data at construction stage, analyses data and information precisely and quickly, visualizes information and reports in a real scale environment, facilitates information flows and communication, learns from itself, historical data and accessible online data to predict future actions, provides semantic and digitalize construction information with analytical capabilities and optimizes decision-making process.
Originality/value
The research presents a framework of an automated construction progress monitoring system that integrates BIM, various reality capturing technologies, DT and XR technologies (VR, AR and MR), arraying the steps on how these technologies work collaboratively to create, capture, generate, analyze, manage and visualize construction progress data, information and reports.
Details
Keywords
Jelle Koolwijk, Clarine van Oel and Mirjam Bel
To explore how and why the social structures of strategic partnerships are shaped by actors and how these interrelate with a team's interpersonal relationships over time. Grasping…
Abstract
Purpose
To explore how and why the social structures of strategic partnerships are shaped by actors and how these interrelate with a team's interpersonal relationships over time. Grasping the complexity of this interplay is essential if we want to comprehend what actually goes on in these partnerships and understand why actors often disengage from them.
Design/methodology/approach
In three cases, 14 in-depth interviews were held with knowledgeable actors about important events and activities that influenced the relationships between partners. Interview data were triangulated with journals kept by the lead author, who participated as an engaged scholar in the three cases. Because this study took an interdisciplinary approach, new insights could evolve from the multi-level analysis.
Findings
Trust has a moderating effect on the relation between open-book accounting and the degree of control a dominant party wants to exercise. When the level of control is raised, this can signal distrust to the other partners, which can harm the relationship. When partners feel more dependent on each other's capabilities to reach their long-term goals, the parties seem to be less likely to put the blame on one of the partners in the case of undesirable events.
Practical implications
Managers should be aware of their power position and acknowledge the effects of power on their relationships. If long-term and close collaboration does not emerge in their partnership, it may be due to how they use their power position.
Originality/value
Thanks to the interdisciplinary approach, this is the first study that shows the significance of trust and power in maintaining strategic partnerships in the construction industry, and how trust can affect the financial rules of actors.
Details
Keywords
Taryn Jane Bond-Barnard, Lizelle Fletcher and Herman Steyn
The purpose of this paper is to emphasise the importance of high levels of trust and collaboration for increasing the likelihood of project management (PM) success. However, the…
Abstract
Purpose
The purpose of this paper is to emphasise the importance of high levels of trust and collaboration for increasing the likelihood of project management (PM) success. However, the link between these three constructs remains unclear.
Design/methodology/approach
In this study, the authors use structural equation modelling (SEM) based on the findings from an international survey of 151 project practitioners to demonstrate the significance of project team trust and collaboration for increasing the likelihood of PM success.
Findings
The results indicate that PM success becomes more likely as the degree of collaboration improves which, in turn, is influenced by an increase in the level of trust between team members. The two factors of PM success are project performance and knowledge integration and innovation. The six factors of the degree of collaboration that were studied are physical proximity, commitment, conflict, coordination, relationships and incentives. The three factors of the level of trust investigated are expectations, knowledge exchange and imported trust.
Practical implications
The results of the study are expected to provide insight for project practitioners to increase the likelihood of PM success by taking cognisance of the factors that influence collaboration and trust. The results of the study may also provide insight into teaching and learning in tertiary education, in terms of professionalism and integrity issues.
Originality/value
This paper presents a new perspective for investigating PM success. SEM techniques are used to determine the likelihood of PM success by promoting trust and collaboration in the project team. This unique approach highlights the “human factors” that influence perceived PM success which should benefit both researchers and practitioners.
Details
Keywords
Laura-Maija Hero and Eila Lindfors
Collaboration between universities and industry is increasingly perceived as a vehicle to enhance innovation. Educational institutions are encouraged to build partnerships and…
Abstract
Purpose
Collaboration between universities and industry is increasingly perceived as a vehicle to enhance innovation. Educational institutions are encouraged to build partnerships and multidisciplinary projects based around real-world open problems. Projects need to benefit student learning, not only the organisations looking for innovations. The context of this study is a multidisciplinary innovation project, as experienced by the students of an University of Applied Sciences in Finland. The purpose of this paper is to unfold students’ conceptions of the learning experience, to help teachers and curriculum designers to organise optimal conditions and processes, and support competence development. The research question was: How do students in higher professional education experience their learning in a multidisciplinary innovation project?
Design/methodology/approach
The study took a phenomenographic approach. The data were collected in the form of weekly diaries, maintained by the cultural management and social services students (n=74) in a mandatory multidisciplinary innovation project in professional higher education in Finland. The diary data were analysed using thematic inductive analysis.
Findings
The results of the study revealed that students’ understood the learning experience in relation to solvable conflicts and unusual situations they experienced during the project, while becoming aware of and claiming their collaborative agency and internalising phases of an innovation process. The competences as learning outcomes that students could name as developed related to content knowledge, different personal characteristics, social skills, emerging leadership skills, creativity, future orientation, social skills, technical, crafting and testing skills and innovation implementation-related skills, such as marketing, sales and entrepreneurship planning skills. However, future orientation and implementation planning skills showed more weakly than other variables in the data.
Practical implications
The findings suggest that curriculum design should enable networked, student-led and teacher supported pedagogical innovation processes that involve a whole path from future thinking and idea development through prototyping to implementation planning of the novel solution. Teachers promote deep comprehension of the innovation process, monitor and ease the pain of conflict if it threatens motivation, offer assessment tools and help in recognising gaps in individual competences and development needs, promote more future-oriented, concrete and implementable outcomes, and facilitate in bridging from innovation towards entrepreneurship planning.
Originality/value
The multidisciplinary innovation project described in this study provides a pedagogical way to connect higher education to the practises of society. These results provide encouraging findings for organising multidisciplinary project activities between education and working life. The paper, therefore, has significant value for teachers and entrepreneurship educators in designing curriculum and facilitating projects. The study promotes the dissemination of innovation development programmes in between education and work organisations also in other than technical and commercial fields.
Details
Keywords
Daniel Wolfgruber, Lina Stürmer and Sabine Einwiller
The purpose of this article is to examine the communicative factors that facilitate or hamper the development of an inclusive work environment with an emphasis on the communication…
Abstract
Purpose
The purpose of this article is to examine the communicative factors that facilitate or hamper the development of an inclusive work environment with an emphasis on the communication about equality, diversity, and inclusion (EDI), while taking diversity characteristics of employees into account.
Design/methodology/approach
In total, 84 persons employed in Austria and Germany, who feature various observable and non-observable diversity characteristics, were interviewed following a problem-centered approach.
Findings
The results indicate that employees with (observable) diversity characteristics, who tend to feel less included, observe more excluding and marginalizing communication and practices in their organizations. Moreover, formal interpersonal communication appears to be more important to develop a highly inclusive workplace than informal interpersonal communication and other forms of communication about EDI.
Research limitations/implications
The sample was rather imbalanced and comprised only employees in Austria and Germany, which limits the study's explanatory power. However, the findings stress the significance of formal interpersonal communication as the cornerstone of an inclusive workplace, which should be followed up in future research.
Practical implications
In terms of the development of an inclusive work environment the findings suggest that strategic (i.e. formal) organizational communication about EDI issues is key to increase the perception of inclusion.
Originality/value
This paper contributes to the literature by demonstrating the importance of interpersonal communication as a key factor that facilitates, but also hampers an inclusive work environment.
Details
Keywords
Silvia Regina Veronezi Correia and Cristina Dai Prá Martens
The purpose of this article is to identify the critical success factors (CSFs) of information technology (IT) projects using cloud computing. CSFs are variables that can influence…
Abstract
Purpose
The purpose of this article is to identify the critical success factors (CSFs) of information technology (IT) projects using cloud computing. CSFs are variables that can influence the success of projects and therefore need to be identified and managed appropriately.
Design/methodology/approach
This is an exploratory qualitative study with 23 experts in cloud computing projects through semi-structured interviews. The data was analyzed using content analysis.
Findings
The results present a list of CSFs for projects in a cloud computing environment. The study demonstrated that the CSF with greater relevance to cloud projects is the team’s technical capacity, followed by the support of senior management and the team’s soft skills. In addition, results demonstrated that contract item management is a limiting factor for cloud projects.
Research limitations/implications
The sample comprised only Brazilian experts, so it may not represent the same scenario as in other locations. The CSF ratio for cloud computing projects may vary depending on the company’s maturity in projects of this nature.
Practical implications
The CSF relationship can guide managers in properly conducting cloud computing projects, contributing to minimizing the risks and challenges that may interfere with the project.
Social implications
The relationship of the CSFs in cloud computing projects proposed fills a gap in studies specifically related to this context and tries to minimize project managers’ stress.
Originality/value
Contract items for the cloud context are added to the CSF literature in IT projects, which have not been addressed so far.
Details
Keywords
Adebayo Agbejule and Lassi Lehtineva
The aim of the study is to explore how the different combinations of traditional and agile project management (APM) enhance project success under different levels of teamwork…
Abstract
Purpose
The aim of the study is to explore how the different combinations of traditional and agile project management (APM) enhance project success under different levels of teamwork quality.
Design/methodology/approach
The study used system approach, using cluster analysis, to examine the relationships between project success and traditional project management (TPM) and APM under different levels of teamwork quality. A cluster analysis approach provides a method to examine how the entire range of variables combine to improve project success.
Findings
The results of the study revealed three profiles of project managers’ differences in teamwork quality and type of project management used: pure agile, TPM leaning hybrid and APM (APM) leaning hybrid. The results found evidence that TPM leaning hybrid received the highest score in project success.
Practical implications
Organizations should develop teamwork skills to learn to use both TPM and APM so that specific risks presented by one approach use are compensated by the use of other. Finally, organizations should have good TPM practices before planning to implement agile practices.
Originality/value
The findings of this study suggest that TPM with high teamwork quality supported by APM can enhance project success. APM supported by TPM contributes to improved project success.
Details