Search results

This work sought to analyze targeted innovation strategies used during the pandemic to maintain companies’ competitiveness.

The methodology was a systematic literature review, analyzing how these factors can be used as leverage in decision-making and suggesting a framework tool.

As a result, nine factors were identified as drivers to stimulate competitiveness, bringing insights to structure actions in times of crisis to support agribusiness.

With this work, it is possible that other companies can base themselves and use the strategic drivers of innovation evidenced to remain competitive in the market during a period of crisis. As this is a systematic review of the literature, the application of a case study, for example, is a limitation, which could be a continuation of the work.

As this is a systematic review of the literature, the application of a case study, for example, is a limitation, which could be a continuation of the work.

This work has high value because it brings insights into strategic drivers of innovation that tend to leverage or maintain the competitiveness of agribusinesses in times of crisis. With the discussion carried out on the data obtained, it is possible that agribusinesses or other types of companies can be based for decision-making in a crisis scenario from innovative actions that generate competitive advantage.

Lean manufacturing (LM) concepts have been widely adopted in diverse industrial sectors. However, no literature review focusing on case studies describing LM implementation is available. Case studies represent the actual implementation and provide secondary data for further analysis. This study aims to review the same to understand the pathways of LM implementation. In addition, it aims to analyse other related review questions, such as how implementing LM impacts manufacturing capabilities and the maturity level of manufacturing organisations that implemented LM, to name a few.

A literature review of case studies that discuss the implementation of LM during the last decade (from 2010 to 2020) is carried out. These studies were synthesised, and content analyses were performed to reveal critical insights.

The implementation pattern of LM significantly varies across manufacturing organisations. The findings show simultaneous improvement in manufacturing capabilities. Towards the end of the last decade, organisations implemented LM with radio frequency identification, e-kanban, simulation, etc.

Reviewing the case studies documenting LM implementation to comprehend the various nuances is a novel attempt. Furthermore, potential future research directions are identified for advancing the research in the domain of LM.

Shorter lead time with low price and quality product demand is pivotal in the garment industry. Pressure on production lead time stresses the importance of reducing style changeover time in manufacturing factories, and this paper aims to contribute to solving the challenge by showing how the single minute exchange of die (SMED) methodology in practice can be adapted to garment factories in developing countries.

The paper investigates three cases of SMED implementation integrated with responsible, accountable, consulted, informed (RACI) matrices in garment factories in an action research approach. Both quantitative and qualitative methods are applied.

The study shows a reduction of 50% to 64% of changeover time with SMED implementation measured with two key indicators – throughout time and time to reach peak production. Moreover, the implementation depends on the application of the RACI matrix for the distribution of responsibility as well as integration with the basic production flow before and after the application of SMED.

The study can guide better SMED implementation in garment factories with limited investment by stressing the need to adapt to the specifics of the garment industry, secure the division of responsibility and integrate SMED in the production flow before and after the changeover.

Limited research on the application of SMED in the garment industry. This paper contributes to understanding the specific conditions for successful implementation in the garment industry in developing countries and addresses additional activities that help secure a sustainable implementation process.

In response to mounting global concerns about climate change and scarcity of natural resources, manufacturers have been pressured to develop strategies and enhance their sustainability performance. The integration of sustainable lean manufacturing (SLM) during value chain processes could balance environmental, social and economic concerns into their decision-making, which not only ensures responsible practices but also drives efficiency and success. This paper aims to identify, measure and prioritize metrics to develop a performance measurement system that assesses the multi-dimensional performance of SLM.

Strategic decision-making has some conflicting criteria and objectives to be considered simultaneously. The Multi-Criteria Decision Making provides a foundation for selecting, sorting and prioritizing these strategies with the determination of drivers and indicator weight.

The performance model enables the decision-makers to consistently evaluate the level of sustainability through a multidimensional framework, which could support the assessment of the existing sustainability of a manufacturing process and analyze opportunities for improvement. This study divided the performance into five drivers: Quality, Operational, Finance, Environment, Safety and People and selected 17 KPIs for assessing the multi-dimensional performance of SLM organizations. The research results revealed an organization's perspective transition from strategies focused on operational and economic performance to a more sustainable ideal with greater importance for social and environmental directions.

This framework will be facilitated by the selection of the most significant drivers and the development of strategic plans for the successful adoption of sustainable manufacturing. The practices support implementation, pursue competitive advantages and sustain manufacturing, meeting strategic requirements of suitable and lean performance. With the limited resources of the organizations, the framework proposed will guide the priorities and actions to be taken toward the SLM.

This paper aims to identify critical factors that influence small and medium-sized enterprise (SME) suppliers’ involvement in their customers’ product development and contrast these with the factors identified from the customer perspective.

A multiple case study approach was used, including four companies. Data were collected through 32 semi-structured interviews, six workshops and documents.

A model is presented that merges this study’s nine identified critical factors with seven critical factors from the customer perspective. The model provides a dual perspective of supplier involvement in product development, wherein the supplier and customer perspectives are concurrently addressed. Some factors are unique for the supplier, but several mirror those on the customer side.

The study is based on data from SME suppliers in Northern Europe. As it is expected that SME companies are more constrained by limited resources, future studies could study critical factors at larger suppliers.

Customers and suppliers having insights about the critical factors can provide better conditions for product development for the other actor; for example, when evaluating customer–supplier integration.

The presented model of critical factors provides a more nuanced picture of supplier involvement in product development as prior research has been biased toward the customer perspective. This study emphasizes the importance of contextual information that has been unnoticed in the literature.

This paper aims to evaluate the current level of knowledge about lean construction (LC) practices in construction companies, universities and class organizations in Brazil and identify the barriers to implementing LC in the Brazilian construction industry and prioritize them through comparison with global challenges.

This multiple case study was carried out through a questionnaire answered by 56 construction companies, 15 universities and 10 professional associations. The questionnaire evaluation allowed the authors to determine the level of knowledge about the LC, its adoption and barriers to its adoption in the Brazilian industry. The results were statistically analyzed using the weighted average (MIS) of results using the Kruskal–Wallis test, which compares sample distribution among groups, and Cronbach’s alpha test to measure the questionnaire reliability.

This study points to universities as the main ones responsible for the low adoption of LC in Brazil and points to the need for an integrated action among construction companies, universities and class organizations to overcome the traditional project management culture and raise the level of knowledge about LC.

This study evaluated the current LC situation in an emerging country, Brazil, and compared it with the principal international challenges observed in studies of other developing countries – China, India, Morocco, Saudi Arabia and Singapore – least developed countries – Bangladesh and Nigeria – and developed country – UK. These studies evaluated construction companies located in the listed countries. Based on that, 22 international challenges were established for the LC adoption. Additionally, this research also evaluated universities and working-class organizations in addition to construction companies. This addition can contribute to a better result understanding that can be explored by Brazil and other countries.

This research paper aims to develop and validate an enhanced business process improvement methodology (EBPIM) by integrating the DMAIC (define, measure, analyze, improve and control) and the comprehensive business process management (CBPM) methodologies.

A systematic literature review and analysis were conducted to prove the novelty of the research approach and identify the similarities, differences, strengths and weaknesses of the DMAIC and the CBPM methodologies. The EBPIM was proposed based on the analysis results. Then, a focus group approach was used to evaluate and validate the methodology.

The EBPIM consists of nine activities: preparation, selection, description, quantification, modeling, enactment, improvement opportunities selection, analysis and improvement and monitoring. The proposed methodology adopted the systematic and structured process of the DMAIC methodology by having one tollgate between every two activities to check the progress and authorize the team to go to the next activity. At the same time, it has the ability of the CBPM methodology to enhance the interaction between human activities and business process management systems (BPMS).

The EBPIM was evaluated and validated by a focus group of academic professors. However, the main limitation of the proposed methodology is that it is still theoretical and needs to be empirically tested. Therefore, future work will focus on testing the EBPIM in different industries and organization sizes.

From the theoretical perspective, the proposed methodology adds value to the knowledge in the scope of business processes improvement methodologies (BPIMs) by integrating the DMAIC and the CBPM methodologies. It takes advantage of and combines the strengths of the DMAIC and CBPM methodologies. From the practical perspective, the proposed methodology presents a valuable tool that can facilitate the organization’s mission to improve the areas that need improvement using a systematic improvement methodology that will effectively enhance organizational performance (OP).

The BPIMs literature analysis proved that most of the reviewed methodologies could not support all phases of the business process improvement (BPI) activities. It was concluded that integrating the DMAIC and the CBPM methodologies is a novel approach. The proposed methodology will enhance the efficiency of both methodologies, fill the gaps that may exist in both of them and lead to better results in terms of BPI.

Contingency studies within logistics and supply chain management have shown a need for longitudinal studies on fit. The purpose of this paper is to investigate the logistics strategy from a process of establishing fit perspective.

A large Swedish building contractor's logistics strategy process was analysed using a longitudinal single-case study for a period of 11 years (2008–2019).

The case study reveals three main constraints to logistics strategy implementation: a dominant purchasing organisation, a lack of incentives and diverging top-management priorities. This suggests that logistics strategy fit is not a conscious choice determined by contextual factors.

Establishing fit is a continuous cycle of regaining fit between the logistics context and logistics strategy components. Fit can be achieved by a change to the logistics context or to logistics strategy components.

Logistics managers may need to opt for satisfactory fit in view of the costs incurred by changing strategy versus the benefits to be gained from a higher degree of fit.

This paper adopts a longitudinal case design to study the fit between the logistics context and strategy, adding to the body of knowledge on organisational design and strategy in logistics and supply chain management.

Saudi Arabia's 2030 vision targets an increase of 34% in non-oil revenue participation in the GDP, thus the need for automation and digital transformation. The Company ER is a market leader producing high-quality dairy products in the Kingdom and is a pioneer in the production industry. The company has recently increased the capacity of its milk factory to meet its vision. An investment was made to automate the pallet handling procedures at the milk factory to provide increased production for daily consumption. The new automation transition in Company ER's milk factory provides a unique opportunity to utilize lean management tools to improve the current automated processes before commercialization.

OEE (overall equipment effectiveness) will monitor losses for different operational losses in the new automated system and indicate system improvements, with 85% as the target. Based on DMADV (design, measure, analyze, design and validate) methodology, this study analyzes the entire automated pallet handling system. It uses lean tools to identify areas for improvement, identify waste elements and propose solutions to achieve Company ER's OEE targets.

In this paper, the outcomes will be presented as documented solutions that address the losses encountered in the production system, showing a 12.8% increase in the system's OEE.

Owing the time and resource constraint, this study only involved automated pallet handling procedures in a milk production facility. Hence, the generalization of the result is slightly limited. More studies in several different processes and sectors are required.

This study provided a valuable tool for researchers for gaining deeper understanding regarding the lean manufacturing and its implementation. For practitioners, it is useful to evaluate the degree of lean manufacturing tools in their material handling systems.

This study is the first attempt to develop lean manufacturing constructs for evaluating the automated pallet handling procedures in a milk production facility.

The purpose of this study is to propose a new mathematical model that integrates strategic decision-making with tactical-operational decision-making in order to optimize production and scheduling decisions.

This study presents a multi-objective optimization framework to make production planning, scheduling and maintenance decisions. An epsilon-constraint method is used to solve small instances of the model, while new hybrid optimization algorithms, including multi-objective particle swarm optimization (MOPSO), non-dominated sorting genetic algorithm, multi-objective harmony search and improved multi-objective harmony search (IMOHS) are developed to address the high complexity of large-scale problems.

The computational results demonstrate that the metaheuristic algorithms are effective in obtaining economic solutions within a reasonable computational time. In particular, the results show that the IMOHS algorithm is able to provide optimal Pareto solutions for the proposed model compared to the other three algorithms.

This study presents a new mathematical model that simultaneously determines green production planning and scheduling decisions by minimizing the sum of the total cost, makespan, lateness and energy consumption criteria. Integrating production and scheduling of a shop floor is critical for achieving optimal operational performance in production planning. To the best of the authors' knowledge, the integration of production planning and maintenance has not been adequately addressed.