Search results

This paper is devoted to prepare micro-cone structure with variable cross-section size by Stereo Lithography Appearance (SLA)-based 3D additive manufacturing technology. It is mainly focused on analyzing the forming mechanism of equipment and factors affecting the forming quality and accuracy, investigating the influence of forming process parameters on the printing quality and optimization of the printing quality. This study is expected to provide a µ-SLA surface preparation technology and process parameters selection with low cost, high precision and short preparation period for microstructure forming.

The µ-SLA process is optimized based on the variable cross-section micro-cone structure printing. Multi-index analysis method was used to analyze the influence of process parameters. The process parameter influencing order is determined and validated with flawless micro array structure.

After the optimization analysis of the top diameter size, the bottom diameter size and the overall height, the influence order of the printing process parameters on the quality of the micro-cone forming is: exposure time (B), print layer thickness (A) and number of vibrations (C). The optimal scheme is A1B3C1, that is, the layer thickness of 5 µm, the exposure time of 3000 ms and the vibration of 64x. At this time, the cone structure with the bottom diameter of 50 µm and the cone angle of 5° could obtain a better surface structure.

This study is expected to provide a µ-SLA surface preparation technology and process parameters selection with low cost, high precision and short preparation period for microstructure forming.

The flexibility of batch process enables its wide application in fine-chemical, pharmaceutical and semi-conductor industries, whilst its complexity necessitates control performance monitoring to ensure high operation efficiency. This paper proposes a data-driven approach to carry out controller performance monitoring within batch based on linear quadratic Gaussian (LQG) method.

A linear time-varying LQG method is proposed to obtain the joint covariance benchmark for the stochastic part of batch process input/output. From historical golden operation batch, linear time-varying (LTV) system and noise models are identified based on generalized observer Markov parameters realization.

Open/closed loop input and output data are applied to identify the process model as well as the disturbance model, both in Markov parameter form. Then the optimal covariance of joint input and output can be obtained by the LQG method. The Hotelling's Tˆ2 control chart can be established to monitor the controller.

(1) An observer Markov parameter approach to identify the time-varying process and noise models from both open and closed loop data, (2) a linear time-varying LQG optimal control law to obtain the optimal benchmark covariance of joint input and output and (3) a joint input and output multivariate control chart based on Hotelling's T² statistic for controller performance monitoring.

This work aims at proposing a novel Internet of Things (IoT)-based and cloud-assisted monitoring architecture for smart manufacturing systems able to evaluate their overall status and detect eventual anomalies occurring into the production. A novel artificial intelligence (AI) based technique, able to identify the specific anomalous event and the related risk classification for possible intervention, is hence proposed.

The proposed solution is a five-layer scalable and modular platform in Industry 5.0 perspective, where the crucial layer is the Cloud Cyber one. This embeds a novel anomaly detection solution, designed by leveraging control charts, autoencoders (AE) long short-term memory (LSTM) and Fuzzy Inference System (FIS). The proper combination of these methods allows, not only detecting the products defects, but also recognizing their causalities.

The proposed architecture, experimentally validated on a manufacturing system involved into the production of a solar thermal high-vacuum flat panel, provides to human operators information about anomalous events, where they occur, and crucial information about their risk levels.

Thanks to the abnormal risk panel; human operators and business managers are able, not only of remotely visualizing the real-time status of each production parameter, but also to properly face with the eventual anomalous events, only when necessary. This is especially relevant in an emergency situation, such as the COVID-19 pandemic.

The monitoring platform is one of the first attempts in leading modern manufacturing systems toward the Industry 5.0 concept. Indeed, it combines human strengths, IoT technology on machines, cloud-based solutions with AI and zero detect manufacturing strategies in a unified framework so to detect causalities in complex dynamic systems by enabling the possibility of products’ waste avoidance.

The purpose of this paper is to investigate the effect of remelting each layer on the homogeneity of nickel-titanium (NiTi) parts fabricated from elemental nickel and titanium powders using laser powder bed fusion (LPBF). In addition, the influence of manufacturing parameters and different melting strategies, including multiple cycles of remelting, on printability and macro defects, such as pore and crack formation, have been investigated.

An LPBF process was used to manufacture NiTi alloy from elementally blended powders and was evaluated with the use of a remelting scanning strategy to improve the homogeneity of fabricated specimens. Furthermore, both single melt and up to two remeltings were used.

The results indicate that remelting can be beneficial for density improvement as well as chemical and phase composition homogenization. Backscattered electron mode in scanning electron microscope showed a reduction in the presence of unmixed Ni and Ti elemental powders in response to increasing the number of remelts. The microhardness values of NiTi parts for the different numbers of melts studied were similar and ranged from 487 to 495 HV. Nevertheless, it was observed that measurement error decreases as the number of remelts increases, suggesting an increase in chemical and phase composition homogeneity. However, X-ray diffraction analysis revealed the presence of multiple phases regardless of the number of melt runs.

For the first time, to the best of the authors’ knowledge, elementally blended NiTi powders were fabricated via LPBF using remelting scanning strategies.

This study aims to explore and empirically test variables influencing material delivery schedule inaccuracies?

A mixed-method case approach is applied. Explanatory variables are identified from the literature and explored in a qualitative analysis at an automotive original equipment manufacturer. Using logistic regression and random forest classification models, quantitative data (historical schedule transactions and internal data) enables the testing of the predictive difference of variables under various planning horizons and inaccuracy levels.

The effects on delivery schedule inaccuracies are contingent on a decoupling point, and a variable may have a combined amplifying (complexity generating) and stabilizing (complexity absorbing) moderating effect. Product complexity variables are significant regardless of the time horizon, and the item’s order life cycle is a significant variable with predictive differences that vary. Decoupling management is identified as a mechanism for generating complexity absorption capabilities contributing to delivery schedule accuracy.

The findings provide guidelines for exploring and finding patterns in specific variables to improve material delivery schedule inaccuracies and input into predictive forecasting models.

The findings contribute to explaining material delivery schedule variations, identifying potential root causes and moderators, empirically testing and validating effects and conceptualizing features that cause and moderate inaccuracies in relation to decoupling management and complexity theory literature?

The purpose of this study is the introduction and validation of a new technique for process monitoring during electron beam melting (EBM).

In this study, a backscatter electron detector inside the building chamber is used for image acquisition during EBM process. By systematic variation of process parameters, the ability of displaying different topographies, especially pores, is investigated. The results are evaluated in terms of porosity and compared with optical microscopy and X-ray computed tomography.

The method is capable of detecting major flaws (e.g. pores) and gives information about the quality of the resulting component.

Image acquisition by evaluating backscatter electrons during EBM process is a new approach in process monitoring which avoids disadvantages restricting previously investigated techniques.

Most of the 3D printing machines do not comply with the requirements of on-site, large-scale multi-story building construction. This paper aims to propose the conceptualization of a tower crane (TC)-based 3D printing controlled by artificial intelligence (AI) as the first step towards a large 3D printing development for multi-story buildings. It also aims to overcome the most important limitation of additive manufacturing in the construction industry (the build volume) by exploiting the most important machine used in the field: TCs. It assesses the technology feasibility by investigating the accuracy reached in the printing process.

The research is composed of three main steps: firstly, the TC-based 3D printing concept is defined by proposing an aero-pendulum extruder stabilized by propellers to control the trajectory during the extrusion process; secondly, an AI-based system is defined to control both the crane and the extruder toolpath by exploiting deep reinforcement learning (DRL) control approach; thirdly the proposed framework is validated by simulating the dynamical system and analysing its performance.

The TC-based 3D printer can be effectively used for additive manufacturing in the construction industry. Both the TC and its extruder can be properly controlled by an AI-based control system. The paper shows the effectiveness of the aero-pendulum extruder controlled by AI demonstrated by simulations and validation. The AI-based control system allows for reaching an acceptable tolerance with respect to the ideal trajectory compared with the system tolerance without stabilization.

In related literature, scientific investigations concerning the use of crane systems for 3D printing and AI-based systems for control are completely missing. To the best of the authors’ knowledge, the proposed research demonstrates for the first time the effectiveness of this technology conceptualized and controlled with an intelligent DRL agent.

The results provide the first step towards the development of a new additive manufacturing system for multi-storey constructions exploiting the TC-based 3D printing. The demonstration of the conceptualization feasibility and the control system opens up new possibilities to activate experimental research for companies and research centres.

The dynamics of the competitive performance of the small medium firms is an evolving field of research in the developing countries like India. The influence of the innovation on the competitive performance of the firms is still an evolving area in India. This paper aims to explore the influence of the innovation on the competitive performance. The study is based upon the agro-food processing industry of the Jammu and Kashmir state of India.

The paper is based upon the exploratory design. It uses quantitative as well as qualitative method for the firm level analysis of competitiveness. The aggregate index method has been used to construct the innovation competence and total competitive performance index. The regression analysis is used for describing the model based upon the primary data.

The results of the study provide for a significant relationship between the innovation competence and firm level competitiveness. It describes the position of the agro-food processing firms under study with respect to the innovation competence index score and total competitiveness performance index.

The paper provides for the managerial implications of strategically incubating the innovation-based competence for the firms in specific geographical areas. The policy implications in terms of developing specific clusters and incubators for incremental and radical innovations can be derived, in regional economies.

The paper discusses the issue of interaction of innovation competence and firm level competitiveness of the agro-food processing industry, which is dynamic, specifically in the developing states. The paper discussed unique methodology of using aggregate index method for defining the innovation competence and competitiveness for the firms where the consistency of data is a major issue for such a complex phenomenon.

The purpose of this paper is to investigate an alternative to established hysteresis models.

Different mathematical representations of the magnetic hysteresis are compared and some differences are briefly discussed. After this, the application of the T(x) function is presented and an inductor model is developed. Implementation details of the used transient circuit simulator code are further discussed. From real measurement results, parameters for the model are extracted. The results of the final simulation are finally discussed and compared to measurements.

The T(x) function possesses a fast mathematical formulation with very good accuracy. It is shown that this formulation is very well suited for an implementation in transient circuit simulator codes. Simulation results using the developed model are in very good agreement with measurements.

For the purpose of this paper, only soft magnetic materials were considered. However, literature suggests, that the T(x) function can be extended to hard magnetic materials. Investigations on this topic are considered as future work.

While the mathematical background of the T(x) function is very well presented in the referenced papers, the application in a model of a real device is not very well discussed yet. The presented paper is directly applicable to typical problems in the field of power electronics.