Search results

In federated search, a query is sent simultaneously to multiple resources and each one of them returns a list of results. These lists are merged into a single list using the results merging process. In this work, the authors apply machine learning methods for results merging in federated patent search. Even though several methods for results merging have been developed, none of them were tested on patent data nor considered several machine learning models. Thus, the authors experiment with state-of-the-art methods using patent data and they propose two new methods for results merging that use machine learning models.

The methods are based on a centralized index containing samples of documents from all the remote resources, and they implement machine learning models to estimate comparable scores for the documents retrieved by different resources. The authors examine the new methods in cooperative and uncooperative settings where document scores from the remote search engines are available and not, respectively. In uncooperative environments, they propose two methods for assigning document scores.

The effectiveness of the new results merging methods was measured against state-of-the-art models and found to be superior to them in many cases with significant improvements. The random forest model achieves the best results in comparison to all other models and presents new insights for the results merging problem.

In this article the authors prove that machine learning models can substitute other standard methods and models that used for results merging for many years. Our methods outperformed state-of-the-art estimation methods for results merging, and they proved that they are more effective for federated patent search.

The density peak clustering algorithm (DP) is proposed to identify cluster centers by two parameters, i.e. ρ value (local density) and δ value (the distance between a point and another point with a higher ρ value). According to the center-identifying principle of the DP, the potential cluster centers should have a higher ρ value and a higher δ value than other points. However, this principle may limit the DP from identifying some categories with multi-centers or the centers in lower-density regions. In addition, the improper assignment strategy of the DP could cause a wrong assignment result for the non-center points. This paper aims to address the aforementioned issues and improve the clustering performance of the DP.

First, to identify as many potential cluster centers as possible, the authors construct a point-domain by introducing the pinhole imaging strategy to extend the searching range of the potential cluster centers. Second, they design different novel calculation methods for calculating the domain distance, point-domain density and domain similarity. Third, they adopt domain similarity to achieve the domain merging process and optimize the final clustering results.

The experimental results on analyzing 12 synthetic data sets and 12 real-world data sets show that two-stage density peak clustering based on multi-strategy optimization (TMsDP) outperforms the DP and other state-of-the-art algorithms.

The authors propose a novel DP-based clustering method, i.e. TMsDP, and transform the relationship between points into that between domains to ultimately further optimize the clustering performance of the DP.

Digital transformation (DT) harnessing the potential of emerging technology creates opportunities and challenges for organizations worldwide. Senior executives view DT as a key initiative for future competitiveness, a view shared by academic researchers. What may challenge the organization is that the vision may be present while preparedness may be lacking. Organizational preparedness depends on managers and employees charged with implementing DT and their perceptions on preparedness are often not aligned with senior executives.

In this research, the authors explore the perceptions of managers and employees on DT preparedness in an organization by gathering data from 579 participants. This study uses an innovative approach to qualitative data analysis using interactive topic modeling.

Findings in this qualitative study provide valuable insights on the perceptions of these individuals and helps understand (a) how they view DT preparedness and (b) may behave in this context. In general DT is well understood, however managers are not keen to change work processes to take advantage of the new digital tools and there appears that generational gap is a barrier to successful DT.

Senior executives play a central role communicating the DT vision necessary to inspire managers and employees. As organizations continue to invest large sums of money to explore value creation for customers and stakeholders by leveraging digital technologies, the information systems (IS) discipline can take the lead by asking the question, what can be done to improve the understanding of DT implementation in an organization?

Road traffic emissions are generally believed to contribute immensely to air pollution, but the effect of road traffic data sets on air quality (AQ) predictions has not been fully investigated. This paper aims to investigate the effects traffic data set have on the performance of machine learning (ML) predictive models in AQ prediction.

To achieve this, the authors have set up an experiment with the control data set having only the AQ data set and meteorological (Met) data set, while the experimental data set is made up of the AQ data set, Met data set and traffic data set. Several ML models (such as extra trees regressor, eXtreme gradient boosting regressor, random forest regressor, K-neighbors regressor and two others) were trained, tested and compared on these individual combinations of data sets to predict the volume of PM_2.5, PM₁₀, NO₂ and O₃ in the atmosphere at various times of the day.

The result obtained showed that various ML algorithms react differently to the traffic data set despite generally contributing to the performance improvement of all the ML algorithms considered in this study by at least 20% and an error reduction of at least 18.97%.

This research is limited in terms of the study area, and the result cannot be generalized outside of the UK as some of the inherent conditions may not be similar elsewhere. Additionally, only the ML algorithms commonly used in literature are considered in this research, therefore, leaving out a few other ML algorithms.

This study reinforces the belief that the traffic data set has a significant effect on improving the performance of air pollution ML prediction models. Hence, there is an indication that ML algorithms behave differently when trained with a form of traffic data set in the development of an AQ prediction model. This implies that developers and researchers in AQ prediction need to identify the ML algorithms that behave in their best interest before implementation.

The result of this study will enable researchers to focus more on algorithms of benefit when using traffic data sets in AQ prediction.

The purpose of this study is to explore how companies can adopt digital humanism (DH), defined as the integration of humanistic skills in the development process of digital technologies, to create value and consequently develop effective business models. Specifically, the aim is to answer the following research question: what are the main DH mechanisms through which companies create value?

Given the limited understanding of the phenomenon under investigation, a qualitative approach was adopted based on a multiple-case study to explore how companies are embracing DH. The study will focus on three exemplar cases in the use of DH, namely, IBM, Microsoft and SAP, well recognized as three of the market leaders in the IT industry. In addition, the selected companies are recognized as some of the most innovative in their specific industries, hence offering a rich set of information on how to specifically embrace DH.

This study unveils the main mechanisms through which companies can create value by implementing DH’s approaches into their business models.

The originality of this research lies in its focus on how companies integrate DH into their business models. Indeed, the study aims at uncovering the main mechanisms that companies use to integrate DH into their overall business practices. Overall, this research provides valuable insights into how companies can effectively integrate DH into their business models, which could have important implications for creating responsible, sustainable and inclusive solutions that prioritize human needs and values.

Industry 4.0 is characterised by systemic transformations occurring exponentially, encompassing an array of dynamic processes and technologies. To move towards a more sustainable future, it is important to understand the nature of this transformation. However, construction enterprises are experiencing a capacity shortage in identifying the transitional management steps needed to navigate Industry 4.0 better. This paper presents a maturity model with the acronym “Smart Modern Construction Enterprise Maturity Model (SMCeMM)” that provides direction to construction enterprises.

It adopts an iterative procedure to develop the maturity model. The attributes of Industry 4.0 maturity are obtained through a critical literature review. The model is further developed through knowledge elicitation using modified Delphi-based expert forums and subsequent analysis through qualitative techniques. The conceptual validity of the model is established through a validation expert forum.

The research defines maturity characteristics of construction enterprises across five levels namely ad-hoc, driven, transforming, integrated and innovative encompassing seven process categories; data management, people and culture, leadership and strategy, automation, collaboration and communication, change management and innovation. The maturity characteristics are then translated into assessment criteria which can be used to assess how mature a construction enterprise is in navigating Industry 4.0.

The results advance the field of Industry 4.0 strategy research in construction. The findings can be used to access Industry 4.0 maturity of general contractors of varying sizes and scales and generate a set of recommendations to support their macroscopic strategic planning.

This study investigates the optimum size for manufacturing firms and the impact of subcontracting on firms' likelihood of achieving their optimal scale in Vietnam.

Using data from the enterprise census in 2017 and 2021, the paper first estimates the production function to identify the optimum firm size for manufacturing firms and then, applies the logit model to investigate factors associated with the optimal firm size.

The study reveals that medium-sized firms exhibit the highest level of productivity. Nevertheless, a consistent trend emerges, indicating that nearly 90% of manufacturing firms in Vietnam operated below their optimal scale in both 2017 and 2021. An analysis of the impact of subcontracting on firms' likelihood to achieve their optimal scale emphasizes its crucial role, especially for foreign firms, exerting an influence nearly five times greater than that of the judiciary system.

The paper's findings offer crucial policy implications, suggesting that initiatives aimed at enhancing the overall productivity of the manufacturing sector should prioritise facilitating contract arrangements to encourage firms to reach their optimal size. These insights are also valuable for other countries with comparable firm size distributions.

This paper provides the first empirical evidence on the relationship between firm size and productivity as well as the role of subcontracting in firms' ability to reach their optimal scale in a country with a right-skewed distribution of firm sizes.

This study aims to provide insight into Library and Information Science (LIS) research in India using scientometric approaches. Web of Science (WoS) and SCOPUS databases were used for data retrieval. The study examines productivity in terms of source types, gender distribution, document formats, authorship and other factors. In addition, this study sought to identify trends or patterns in the research preferences of LIS scientists through text analysis.

Data were downloaded from the WoS and Scopus databases over 22 years and analysed using VOSviewer, Orange, Biblioshiny and CRExplorer softwares.

The findings reveal that 5,692 out of the 9,384 documents in both databases underwent the final examination. In total, 466 different sources produced all of those papers. Author analysis revealed that 6,603 different authors authored 5,692 documents. There were 4,209 male and 1,063 female authors. Furthermore, India shares maximum collaborations with the USA and England. The spectrogram features nine significant peaks corresponding to Lotka’s, Bradford’s and similar laws. Text analysis revealed that Indian LIS researchers have consistently investigated open access and digital or open libraries.

The findings of this study will provide readers with a better understanding of India’s contribution to LIS. In addition, the study will help academics identify research gaps and undiscovered areas in the Indian context that require further investigation.

Not many studies highlight Indian research trends and international collaboration in LIS. This study highlights research trends, collaboration and gender productivity in LIS. The most cited references and trending topics were also identified using reference publication year spectroscopy and text analysis techniques.

As e-commerce has expanded rapidly, online shopping platforms have become widespread in India and throughout the world. Product return, which has a negative effect on the E-Commerce Industry's economic and ecological sustainability, is one of the E-Commerce Industry's greatest challenges in light of the substantial increase in online transactions. The authors have analyzed the purchasing patterns of the customers to better comprehend their product purchase and return patterns.

The authors utilized digital transformation techniques-based recency, frequency and monetary models to better understand and segment potential customers in order to address personalized strategies to increase sales, and the authors performed seller clustering using k-means and hierarchical clustering to determine why some sellers have the most sales and what products they offer that entice customers to purchase.

The authors discovered, through the application of digital transformation models to customer segmentation, that over 61.15% of consumers are likely to purchase, loyal customers and utilize firm service, whereas approximately 35% of customers have either stopped purchasing or have relatively low spending. To retain these consumer segments, special consideration and an enticing offer are required. As the authors dug deeper into the seller clustering, we discovered that the maximum number of clusters is six, while certain clusters indicate that prompt delivery of the goods plays a crucial role in customer feedback and high sales volume.

This is one of the rare study that develops a seller segmentation strategy by utilizing digital transformation-based methods in order to achieve seller group division.

The purpose of this study is to examine the influence of knowledge creation (KC) process on customer relations management (CRM) in Palestinian commercial banks, taking into consideration which factors of KC process support the CRM system.

The study uses a quantitative research design wherein questionnaires have been used to collect data from 345 respondents in the Palestinian banking sector. Research hypotheses have been tested using multiple regression analysis.

The findings unveil that socialisation and combination processes have a positive impact on CRM. In contrast, internalisation process negatively affects CRM system, but outsourcing knowledge does not significantly affect CRM.

Past studies empirically validated the success of CRM adaptation in the context of different industries. This study provides a new conceptual model which validates the influence of KC on CRM in the banking sector. It also affirms the integral role of KC in supporting CRM from an emerging country perspective like Palestine.

This study offers new insights into creating of knowledge by employees in supporting CRM. It will encourage future scholars to further explore the key dimensions of the KC process for a more detailed investigation at a workplace. This study suggests that banks’ directors and employees should behave in a social manner to support relationship with customers. This study also suggests facilitating knowledge from different resources in innovative ways, through encouraging creative thinking from experiences, using technology in sharing knowledge, focussing on appropriate training to resolve customers' problems and disseminating new knowledge among employees.

This study expands the body of knowledge on KC process in supporting CRM from an emerging country perspective. This study validates the influence of KC on CRM in the Palestinian banking sector. This sheds light on the integration of these two concepts.