Search results

The Overall Equipment Effectiveness (OEE) is considered a standard for measuring equipment productivity in terms of efficiency. Still, Artificial Intelligence solutions are rarely used for analyzing OEE results and identifying corrective actions. Therefore, the approach proposed in this paper aims to provide a new rule-based Machine Learning (ML) framework for OEE enhancement and the selection of improvement actions.

Association Rules (ARs) are used as a rule-based ML method for extracting knowledge from huge data. First, the dominant loss class is identified and traditional methodologies are used with ARs for anomaly classification and prioritization. Once selected priority anomalies, a detailed analysis is conducted to investigate their influence on the OEE loss factors using ARs and Network Analysis (NA). Then, a Deming Cycle is used as a roadmap for applying the proposed methodology, testing and implementing proactive actions by monitoring the OEE variation.

The method proposed in this work has also been tested in an automotive company for framework validation and impact measuring. In particular, results highlighted that the rule-based ML methodology for OEE improvement addressed seven anomalies within a year through appropriate proactive actions: on average, each action has ensured an OEE gain of 5.4%.

The originality is related to the dual application of association rules in two different ways for extracting knowledge from the overall OEE. In particular, the co-occurrences of priority anomalies and their impact on asset Availability, Performance and Quality are investigated.

Wage employees enter self-employment either directly or in a staged manner and may subsequently undertake multiple stints at self-employment. Extant research on the relationship between entry modes and the persistence and outcomes of self-employment is inconclusive. This study investigates the relationship between wage employees’ initial mode of entry into self-employment and the duration of the subsequent first two stints of self-employment.

This study used a matched longitudinal sample of 9,550 employees who became majority owners of incorporated firms from 2005 to 2016.

The findings demonstrate that the initial mode of entry into self-employment matters for the first two stints at self-employment. Staged entry into self-employment was associated with a shorter first stint and became insignificant for the second stint. Staged entry into self-employment was positively related to the odds of becoming self-employed for the second time in the same firm.

Using a comprehensive and reliable dataset, the paper shifts focus from the aggregated onward journey of novice entrepreneurs (survival as the outcome) to the duration of their self-employment stints. By doing so, the paper offers insights into the process of becoming self-employed and the patterns associated with success/failure in entrepreneurship associated with self-employment duration.

This study aims to minimize the cost and time of blood delivery in the whole blood supply chain network (BSCN) in disaster conditions. In other words, integrating all strategic, tactical and operational decisions of three levels of blood collection, processing and distribution leads to satisfying the demand at the right time.

This paper proposes an integrated BSCN in disaster conditions to consider four categories of facilities, including temporary blood collection centers, field hospitals, main blood processing centers and medical centers, to optimize demand response time appropriately. The proposed model applies the location of all permanent and emergency facilities in three levels: blood collection, processing and distribution. Other essential decisions, including multipurpose facilities, emergency transportation, inventory and allocation, were also used in the model. The LP metric method is applied to solve the proposed bi-objective mathematical model for the BSCN.

The findings show that this model clarifies its efficiency in the total cost and blood delivery time reduction, which results in a low carbon transmission of the blood supply chain.

The researchers proposed an integrated BSCN in disaster conditions to minimize the cost and time of blood delivery. They considered multipurpose capabilities for facilities (e.g. field hospitals are responsible for the three purposes of blood collection, processing and distribution), and so locating permanent and emergency facilities at three levels of blood collection, processing and distribution, support facilities, emergency transportation and traffic on the route with pollution were used to present a new model.

This paper aims to further our understanding of policy–practice gaps in organizations from an organizational learning perspective. The authors conceptualize and analyze policy–practice gaps in terms of what they label the dual challenge of organizational learning, i.e. the organizational tasks of both adapting ongoing practices to prescribed policy demands and adapting the policy itself to the needs of practice. Specifically, the authors address how this dual challenge can be understood in terms of organizational learning and how an organization can be managed to successfully resolve the dual learning challenge and, thereby, bridge policy–practice gaps in organizations.

This paper draws on existing literature to explore the gap between policy and practice. Through a synthesis of theories and an illustrative practical example, this paper highlights key conceptual underpinnings.

In the analysis of the dual challenge of organizational learning, this study provides a conceptual framework that emphasizes the important role of tensions and contradictions between policy and practice and their role as drivers of organizational learning. To bridge policy–practice gaps in organizations, this paper proposes five key principles that aim to resolve the dual challenge and accommodate both deployment and discovery in organizations.

Because this is a conceptual study, empirical research is called for to explore further and test the findings and conclusions of the study. Several avenues of possible future research are proposed.

This paper primarily contributes by introducing and elaborating on a conceptual framework that offers novel perspectives on the dual challenges of facilitating both discovery and deployment processes within organizations.

This study employs Stein Rokkan's methodological approach to analyse state formation in the Greater Middle East. It develops a conceptual framework distinguishing colonial, populist and democratic pacts, suitable for analysis of state formation and nation-building through to the present period. The framework relies on historical institutionalism. The methodology, however, is Rokkan's. The initial conceptual analysis also specifies differences between European and the Middle Eastern state formation processes. It is followed by a brief and selective discussion of historical preconditions. Next, the method of plotting singular cases into conceptual-typological maps is applied to 20 cases in the Greater Middle East (including Afghanistan, Iran and Turkey). For reasons of space, the empirical analysis is limited to the colonial period (1870s to the end of World War 1). Three typologies are combined into one conceptual-typological map of this period. The vertical left-hand axis provides a composite typology that clarifies cultural-territorial preconditions. The horizontal axis specifies transformations of the region's agrarian class structures since the mid-19th century reforms. The right-hand vertical axis provides a four-layered typology of processes of external intervention. A final section presents selected comparative case reconstructions. To the authors' knowledge, this is the first time such a Rokkan-style conceptual-typological map has been constructed for a non-European region.

This paper aims to identify the different system approach using Building Information Modelling (BIM) technology that is equipped with decision making processes. Maintenance planning and management are integral components of the construction sector, serving the broader purpose of post-construction activities and processes. However, as Precast Concrete (PC) construction projects increase in scale and complexity, the interconnections among these activities and processes become apparent, leading to planning and performance management challenges. These challenges specifically affect the monitoring of façade components for corrective and preventive maintenance actions.

The concept of maintenance planning for façades, along with the main features of information and communication technology tools and techniques using building information modeling technology, is grounded in the analysis of numerous literature reviews in PC building scenarios.

This research focuses on an integrated system designed to analyze information and support decision-making in maintenance planning for PC buildings. It is based on robust data collection regarding concrete façades' failures and causes. The system aims to provide appropriate planning decisions and minimize the risk of façade failures throughout the building's lifetime.

The study concludes that implementing a research framework to develop such a system can significantly enhance the effectiveness of maintenance planning for façade design, construction and maintenance operations.

This paper comprehensively addresses the influence of chopped strand mat glass fiber-reinforced polymer (GFRP) patch configurations such as geometry, dimensions, position and the number of layers of patches, whether a single or double patch is used and how well debonding the area under the patch improves the strength of the cracked aluminum plates with different crack lengths.

Single-edge cracked aluminum specimens of 150 mm in length and 50 mm in width were tested using the tensile test. The cracked aluminum specimens were then repaired using GFRP patches with various configurations. A three-dimensional (3D) finite element method (FEM) was adopted to simulate the repaired cracked aluminum plates using composite patches to obtain the stress intensity factor (SIF). The numerical modeling and validation of ABAQUS software and the contour integral method for SIF calculations provide a valuable tool for further investigation and design optimization.

The width of the GFRP patches affected the efficiency of the rehabilitated cracked aluminum plate. Increasing patch width WP from 5 mm to 15 mm increases the peak load by 9.7 and 17.5%, respectively, if compared with the specimen without the patch. The efficiency of the GFRP patch in reducing the SIF increased as the number of layers increased, i.e. the maximum load was enhanced by 5%.

This study assessed repairing metallic structures using the chopped strand mat GFRP. Furthermore, it demonstrated the superiority of rectangular patches over semicircular ones, along with the benefit of using double patches for out-of-plane bending prevention and it emphasizes the detrimental effect of defects in the bonding area between the patch and the cracked component. This underlines the importance of proper surface preparation and bonding techniques for successful repair.

This paper investigates the effect of state-society relations on the industrially-related growth paths of developed countries.

It introduces a novel theoretical framework, the state-business-labor relations (SBLR) framework, where four main actors are identified: the state, big businesspersons or tycoons, owners and managers of small and medium enterprises (SMEs) or Entrepreneurs and labor. Different SBLR categories or modes are introduced depending on levels of coordination and power relations between the studied actors. The paper then investigates how these SBLR modes, through adopting various policies targeting the industrial sector, lead to different growth paths. Rather than focusing only on economic growth, this research regards a growth path as a matrix of the performance in long-run growth and equality of distribution.

Using regression analysis and statistical data, the results suggest that the Co-Balanced mode, having higher levels of coordination and lower favoritism, leads to the best growth path among the four introduced modes, especially with its emphasis on high levels of venture capital availability and easiness of starting business. while the Lib-Capture mode, characterized by lower coordination and higher favoritism, seems to have the worst growth path and the best implemented policy for this mode is suggested to be high profit taxes that seem to counter the negative impact of the existing high levels of favoritism.

Despite the important findings that this research has reached, this paper is mainly meant to open a further investigation into this topic and open this dimension that the research on VoC and political economy have under-researched. A deeper investigation of SBLR typologies that could only be possible by having richer datasets with more data on coordination for the whole world, rather than only the advanced economies, would further our understanding of the dynamics that shape the growth paths of different countries of the world.

To realize the best industrial growth path, fighting favoritism should be an important objective. The negative impact of favoritism on innovation could not be disregarded in the eve of the fourth industrial revolution, where innovation is increasingly pivotal to future industrial development. Actively engaging societal groups in the policymaking process is important in addressing their concerns and balancing them at the same time. This should lead to the double benefit of formulating better policies that should foster growth as well as provide better distribution of this growth. High levels of coordination should help in realizing this objective. Yet, this could only be possible if societal groups are free to associate and aggregate their power and when there are means of preventing one actor from gaining more favorite treatment and exclusive influence over policymakers. The presence of both powerful and broadly represented business associations and labor unions and the existence of a government interested in coordinating their efforts-rather than letting itself be controlled by one group at the expense of the others-should help in the realization of the best growth path. Thus, institutional reform that empowers societal groups and enables them to defend their interests as well as fights all forms of corruption should lead to the realization of a more prosperous and equitable industrial development, with the “re-industrialization” of the developed world being no exception. The technological and social challenges of intensive automation and digitalization accompanying the fourth industrial revolution make the envisaged institutional reform more urgent.

This paper is introducing a novel theoretical framework for studying the effect of state-society relations, particularly SBLR, on the industrial growth paths of developed countries. It integrates three important bodies of literature in order to build a more comprehensive understanding of the dynamics of state-society relations and their economic consequences. These are the Varieties of Capitalism (VoC), State-Business Relations (SBR) and Industrial Relations. The SBLR framework differentiates between tycoons and entrepreneurs, an important distinction that often goes unnoticed. Different SBLR categories or modes are introduced, depending on levels of coordination and power relations between the actors. It is proposed in this research that the effect on growth paths goes beyond the simple dichotomy between CMEs and LMEs usually present in the literature of VoC and that power relations provide an essential complementary dimension in explaining this causality.

Managers must make numerous strategic decisions in order to initiate and implement a business model innovation (BMI). This paper examines how managers perceive the management team interacts when making BMI decisions. The paper also investigates how group biases and board members’ risk willingness affect this process.

Empirical data were collected through 26 in-depth interviews with German managing directors from 13 companies in four industries (mobility, manufacturing, healthcare and energy) to explore three research questions: (1) What group effects are prevalent in BMI group decision-making? (2) What are the key characteristics of BMI group decisions? And (3) what are the potential relationships between BMI group decision-making and managers' risk willingness? A thematic analysis based on Gioia's guidelines was conducted to identify themes in the comprehensive dataset.

First, the results show four typical group biases in BMI group decisions: Groupthink, social influence, hidden profile and group polarization. Findings show that the hidden profile paradigm and groupthink theory are essential in the context of BMI decisions. Second, we developed a BMI decision matrix, including the following key characteristics of BMI group decision-making managerial cohesion, conflict readiness and information- and emotion-based decision behavior. Third, in contrast to previous literature, we found that individual risk aversion can improve the quality of BMI decisions.

This paper provides managers with an opportunity to become aware of group biases that may impede their strategic BMI decisions. Specifically, it points out that managers should consider the key cognitive constraints due to their interactions when making BMI decisions. This work also highlights the importance of risk-averse decision-makers on boards.

This qualitative study contributes to the literature on decision-making by revealing key cognitive group biases in strategic decision-making. This study also enriches the behavioral science research stream of the BMI literature by attributing a critical influence on the quality of BMI decisions to managers' group interactions. In addition, this article provides new perspectives on managers' risk aversion in strategic decision-making.

This study aims to examine why tax reforms fail and explores how tax collection can be improved within a developing country context.

Data comprise 28 semi-structured interviews with taxpayers, tax experts and tax authority personnel based in Pakistan. The results are analysed using a combined lens of taxpayer trust and tax agencies’ capabilities.

Tax reforms failed to build taxpayers’ trust and tax agencies’ capabilities. Building trust is challenging and demands extensive ongoing engagement with taxpayers while yielding gradual permanent results. This requires enhancing confidence in government; educating taxpayers; removing complexities; introducing transparency and accountability in tax agencies’ operations and the tax system; promoting procedural and distributive justice; and reversing perceptions of corruption through reconciliation and stakeholder inclusivity. Developing tax agencies’ capabilities requires upgrading outdated technologies, systems and processes; implementing governance and organisational reforms; introducing an oversight board; and recruiting and training skilled professionals.

The findings can assist policymakers and tax collection authorities in understanding why tax reforms fail and identifying potential solutions.

This study contributes to the emerging literature by exploring tax administration failures in developing countries. It contributes to the literature by engaging stakeholders to understand why reforms fail and potential solutions to stimulate tax revenues.