Search results

One of the critical reasons for the nonacceptance of additive manufacturing (AM) processes is the lack of understanding and structured knowledge of design for additive manufacturing (DfAM). This paper aims to assist designers to select the appropriate AM technology for product development or redesign. Using the suggestion provided by the design assist tool, the user’s design alterations depend on their ability to interpret the suggestion into the design without affecting the design’s primary objective.

This research reports the development of a tool that evaluates the efficacy values for all seven major standard AM processes by considering design parameters, benchmark standards within the processes and their material efficacies. In this research, the tool provides analytical and visual approaches to suggestion and assistance. Seventeen design parameters and seven benchmarking standards are used to evaluate the proposed product and design quality value. The full factorial design approach has been used to evaluate the DfAM aspects, design quality and design complexity.

The outcome is evaluated by the product and design quality value, material suit and material-product-design (MPD) value proposed in this work for a comparative assessment of the AM processes for a design. The higher the MPD value, the better the process. The visual aspect of the evaluation uses spider diagrams, which are evaluated analytically to confirm the results’ appropriateness with the proposed methodology.

The data used in the database is assumed to make the study comprehensive. The output aims to help opt for the best process out of the seven AM techniques for better and optimized manufacturing. This, as per the authors’ knowledge, is not available yet.

This paper outlines how Design for Lean Six Sigma methods aided a medical device manufacturing company in developing a new strategic space management and approval process for its manufacturing site.

The project demonstrates the application of the Design for Lean Six Sigma and structured Define, Measure, Analyse, Design, and Verify methodology in designing and implementing a process that enables the case study manufacturing site to improve its space utilisation and free up space.

The project was validated in one manufacturing department, and the Design for Lean Six Sigma methodology resulted in creating 15% new space for that area, with opportunities identified to free up 44.7% of the total manufacturing floor space and realise over €2.2 million cost savings as well as start to manufacture new products launched.

The manuscript highlights for the first time how the Design for Lean Six Sigma methodology can be utilised for space utilisation and can be leveraged by other manufacturers. The current study's limitations are that it is a single-site case study application. Future longitudinal case studies on Design for Lean Six Sigma application in more manufacturing space utilisation projects would be useful. This study has implications for identifying best practices for Design for Lean Six Sigma methodology application in the device industry, thus improving the state of the art for introducing new manufacturing lines.

This is the first published work to utilise Design for Lean Six Sigma methodology for space utilisation in a medical device company. This review will provide medical devices and other manufacturing organisations with recommendations on utilising Design for Lean Six Sigma and design for improved space utilisation to reduce costs.

Civil engineering projects around the world have been underperforming for a long time. While the complexity of these projects will continue to increase, there is an urgent need to perform better. Although the integrated design process is critical for project success, the literature lacks studies describing the link to project performance. Therefore, this study aims to investigate the dominant variables that affect the integrated design process and consequently project performance.

A multiple case study was conducted to determine the dominant variables that affect the integrated design process and project performance. The research included four projects. Semi-structured interviews were the main source of data.

The cases indicated that the extent to which an integrated approach is achieved in the design process is essential for project performance. This applies to the integration of stakeholders’ interests as well as the integration of disciplines. Above all, it was concluded that the project team participants’ competencies for integration are a dominant factor for project performance, as the integrated design process has changed from a technical challenge to an integrative one.

This study provides insights into the dominant variable of the integrated design process that affects project performance, which is underexposed in the literature. The study results reveal the importance of competencies related to integration and adoption of the design problem context, which are not yet included in civil engineering design methods. In this respect, empathy is introduced as a new and critical competence for the civil engineering industry, which needs further research.

The purpose of this paper is to develop a framework to facilitate early supplier involvement (ESI) as an approach for reducing construction waste (CW) generated during the design process.

A research methodology consists of literature review, case studies and survey questionnaire was designed to achieve the abovementioned aim. First, the literature review was used to investigate CW, CW generated during the design process, the design process and ESI. Second, two construction projects were analysed to investigate the role of ESI towards reducing CW generated during the design waste. Third, a survey questionnaire was carried out with a representative sample of architectural design firms (ADFs) in Egypt to examine their perception and application of ESI towards reducing CW generated during the design process. Based on the results of the above, the research developed a framework to facilitate ESI during the design process to reduce CW.

Through literature review, the research highlighted the causes of CW generated during the design process and identified the benefits and challenges that encounter ESI in ADFs. Results of data analysis showed that “last-minute changes due to client requirements” was ranked the highest challenges of ESI in ADFs in Egypt followed by “lack of design experience”. Moreover, “providing technical information about materials and equipment and their capabilities” was ranked by respondents as the highest contributions of suppliers during the design process which leads to waste reduction followed by “better estimation of materials and costs”. Finally, respondents stated that “resistance of ADFs to include suppliers in the design phase” was ranked the highest challenge of ESI in the design process followed by “no clear guidelines or policies that organise ESI”.

Because of the conceptual nature of the proposed framework, it has to be tested and validated to ensure its capability to overcome the challenges of ESI as an approach for reducing CW generated during the design process.

This research presents a practical solution to the problem of CW generated during the design process through ESI.

The research discussed the causes of CW originated from the design process and the benefits and challenges of ESI in ADFs. It investigated the perception and application of ESI in ADFs in Egypt. The proposed framework which was designed to facilitate the integration of suppliers in the early stages of the project life cycle represents a synthesis that is novel and creative in thought and adds value to the knowledge in a manner that has not previously occurred.

Designing digital artifacts is not a linear, straightforward process. This is particularly true when applying a user-centered design approach, or co-design, with users who are unable to participate in the design process. Although the reduced participation of a particular user group may harm the end result, the literature on solving this issue is sparse. In this article, proxy design is outlined as a method for involving a user group as proxy users to speak on behalf of a group that is difficult to reach. The article investigates the following research question: How can roleplaying be embedded in co-design to engage users as proxies on behalf of those who are unable to represent themselves?

The article presents a design ethnography spanning three years at a cancer rehabilitation clinic, where digital artifacts were designed to be used collaboratively by nurses and patients. The empirical data were analyzed using content analysis and consisted of 20 observation days at the clinic, six proxy design workshops, 21 telephone consultations between patients and nurses, and log data from the digital artifact.

The article shows that simulated consultations, with nurses roleplaying as proxies for patients ignited and initiated the design process and enabled an efficient in-depth understanding of patients. Moreover, the article reveals how proxy design as a method further expanded the design. The study findings illustrate: (1) proxy design as a method for initiating design, (2) proxy design as an embedded element in co-design and (3) six design guidelines that should be considered when engaging in proxy design.

The main contribution is the conceptualization of proxy design as a method that can ignite and initiate the co-design process when important users are unreachable, vulnerable or unable to represent themselves in the co-design process. More specifically, based on the empirical findings from a design ethnography that involved nurses as proxy users speaking on behalf of patients, the article shows that roleplaying in proxy design is a fitting way of initiating the design process, outlining proxy design as an embedded element of co-design.

Project managers rely on control strategies to deliver excellent outputs. However, little is known about how clients' project managers select control strategies in projects which are knowledge-intensive and have intangible outputs. This study aims to examine how clients' project managers select project control strategies in professional service projects.

A questionnaire survey of 360 architectural and engineering (A/E) design projects was adopted. Data were analyzed through the hierarchical regression.

Both clients' knowledge of measuring outcomes and process uncertainty give rise to their project managers setting up behavior and social controls. Level of process uncertainty positively moderates the impact of client's knowledge of measuring outcomes on outcome control.

This study mainly examined the client's knowledge of measuring outcomes and process uncertainties. Future studies could be conducted to expand the scope by including other contextual factors, for instance market and regulatory factors.

From the client side, if they want to simultaneously adopt outcome, behavior and social controls, they would need to increase their knowledge of measuring outcomes by adopting established assessment tools or appointing a third party to assist in design outcome evaluation.

This study contributes to the body of knowledge by showing that the level of intangibility of project outputs influences the types of control system which project managers adopt.

Uncertainty management (UM) in projects has been a point of attention for researchers for many years. Research on UM has mainly been aimed at uncertainty analyses in the front-end and managing uncertainty in the construction phase. In contrast, UM components in the design phase have received less attention. This research aims to improve knowledge about the key components of UM in the design phase of large road projects.

This study adopted a literature review and case study. The literature review was used to identify relevant criteria for UM. These criteria helped to design the interview guide. Multiple case study research was conducted, and data were collected through document study and interviews with project stakeholders in two road projects. Each case's owners, contractors and consultants were interviewed individually.

The data analysis obtained helpful information on the involved parties, process and exploit tools and techniques during the design phase. Johansen's (2015) framework [(a) human and organisation, (b) process and (c) tools and techniques)] was completed and developed by identifying relevant criteria (such as risk averse or risk-taker, culture and documentation level) for each component. These criteria help to measure UM performance. The authors found that owners and contractors are major formal UM actors, not consultants. Empirical data showed the effectiveness of Web-based tools in UM.

The studied cases were Norwegian, and this study focussed on uncertainties in the project's design phase. Relevant criteria did not cover all the criteria for evaluating the performance of UM. Qualitative evaluation of criteria allows further quantitative analysis in the future.

This paper gave project owners and managers a better understanding of relevant criteria for measuring UM in the owners and managers' projects. The paper provides policy-makers with a deeper understanding of creating rigorous project criteria for UM during the design phase. This paper also provides a guideline for UM in road projects.

This research gives a holistic evaluation of UM by noticing relevant criteria and criteria's interconnection in the design phase.

Business models are increasingly recognized as a concept to support innovation in organizations. The implementation and operation of a new or altered business model involves the (re-)design of an organization's business processes and their successful execution. This study reviews and synthesizes the existing body of literature to guide organizations in systematically moving from a business model design to the implementation and operation of the business model through their underlying business processes.

A systematic literature review of the methods that bridge business models and business processes is performed. The selected 34 studies are classified according to the method's characteristics and the support in the design, implementation and operation of business models.

The results of the systematic review provide an overview of existing methods that organizations can adopt when moving from business model design into the implementation and operation of their business model using processes.

This work provides a comprehensive overview and detailed insight into the existing methods that align business models and business processes. It increases the understanding on how these two concepts can be synthesized to support more effective digital innovation in organizations. Based on the review results, knowledge gaps are identified and an agenda for future research bridging the fields of business models and business processes is proposed.

The point of departure for this viewpoint paper is the current development in which landscape architects are working towards achieving the United Nations sustainable development goals and the associated cross-cutting pledge “Leave No One Behind”. The sustainable development goals 3 and 11 can be achieved through landscape projects that are inclusive and health promoting, and the authors argue that an evidence-based design process is needed to ensure that project designs deliver what they promise. However, most landscape architects are not trained in evidence-based design and are therefore unsure of what can be used as evidence. A further challenge is the lack of relevant and applicable research evidence for design processes.

The authors present a process model for evidence-based health design in landscape architecture as an overall framework on which the authors base their arguments. The model includes four topics of evidence: target group, human health, environment and use of nature. For each topic, the authors present their view on what may be considered as evidence and where it can be found or generated. The study view is supported by a detailed presentation of where and how evidence was found and generated in a design project for an accessible and health-promoting forest trail for people with mobility disabilities.

The authors suggest a broad definition of evidence, and that the design process should draw on evidence from relevant research and practice disciplines. Evidence can be found in multiple sources, for example, scientific articles, theoretical works and design guidelines. It can also be generated by landscape architects themselves, for example, through landscape analyses and stakeholder workshops. The evidence should guide and support the landscape architect and not dictate the design process.

The authors hope that the knowledge provided on the evidence-based health design process and on where to collect or how to generate evidence may inspire landscape architects in their future health design projects.

People with mobility disabilities face many health challenges and should potentially be able to benefit from visiting green spaces. The authors hope that the knowledge provided on the evidence-based health design process and on where to collect or how to generate evidence may inspire landscape architects in their future health design projects.

This research proposes how Design for Six Sigma (DFSS) provides a complementary approach for business process management (BPM) lifecycle implementation in order to address gaps identified in the current literature.

The mandatory elements of a method (MEM) framework is used to illustrate DFSS's maturity as a process redesign method. The use of DFSS in a BPM context is described through several action research case examples.

This research specifies the procedure model (order of development activities), techniques, results, roles and information/meta model (conceptual data model of results) associated with using DFSS to address BPM-related challenges. The action research case examples provided discuss the details of implementing BPM using DFSS to design, implement and test redesigned processes to ensure they fulfill the needs of process participants.

While the case examples discussed were performed in only a few settings, which limits the generalizability of their results, they provide evidence regarding the wide range of domains in which the proposed DFSS-BPM approach can be applied and how the tools are used in different contexts.

This research offers a road map for addressing the challenges practitioners often face with BPM lifecycle implementation.

This research provides the first attempt to integrate DFSS as a complementary method for BPM lifecycle implementation.