Search results

The aim of the study is to analyze the perceptions of belief-in-importance (BI), self-efficacy (SE) and preferred source of learning (SL) of information literacy (IL) competencies among psychology students in Spain and Portugal.

Unified protocol was based on the questionnaire IL-HUMASS (26 items). Quantitative diagnostic-comparative study was carried out, including factor and variance analysis. Hypothesis compliance was checked.

By country, there are no significant differences in students' perceptions, although the scores in BI are higher than in SE. By category, there are some significant differences, and the least valued is that of processing. By individual competency, seven of them show differences between countries. Learning preferences are for a mix of classroom and autonomous learning. Students barely realize the value of libraries. Within factor structures, which share the same components in each dimension, some emerging factors do appear.

Motivation (BI and SE) with respect to IL competencies is a key asset for future psychologists. Interest should focus on some emerging motivational factors. Students' appreciation of the library should enhance through the corresponding initiatives for improvement. This method could be complemented by qualitative studies.

This is probably the first diagnostic-comparative study on perceptions of IL competencies among future psychology professionals.

The purpose of this paper is to uncover similarities and differences among emphasized information literacy (IL) skills for the disciplines of political- and social sciences, economics, educational sciences, law sciences, mathematics, life sciences, history and German studies, based on an analysis of IL teaching materials.

Eight issues of the German language publication series Erfolgreich recherchieren (Succesful Research Strategies) are compared by using a structuring content analysis. The category system is based on the IL standards and performance indicators of the Association of College and Research Libraries (2000), extended with additional categories.

The results, first, suggest that the biggest similarities and differences among the disciplines are found concerning the determination of the nature and extent of the needed information, especially in the area of identifying potential sources of information. Second, some of the disciplines focus more on international sources, whereas others focus on country- and language-specific sources. Third, the criteria to define the appropriate retrieval system differ among the various disciplines. Fourth, approaches to narrow the search results differ among the various disciplines. Fifth, the critical evaluation of sources is addressed in all disciplines but relates to different contexts.

This approach only addresses one book per discipline out of a German language book series. Further research is needed.

This paper is unique in its approach and one of few papers on disciplinary differences in IL perception.

Building information modeling (BIM) is mostly limited to the design phase where two parallel processes exist, i.e. creating 2D-drawings and BIM. Towards the end of the design process, BIM becomes obsolete as focus shifts to producing static 2D-drawings, which leads to a lack of trust in BIM. In Scandinavia, a concept known as Total BIM has emerged, which is a novel “all-in” approach where BIM is the single source of information throughout the project. This paper's purpose is to investigate the overall concept and holistic approach of a Total BIM project to support implementation and strategy work connected to BIM.

Qualitative data were collected through eight semi-structured interviews with digitalization leaders from the case study project. Findings were analyzed using a holistic framework to BIM implementation.

The Total BIM concept was contingent on the strong interdependences between commonly found isolated BIM uses. Four main success factors were identified, production-oriented BIM as the main contractual and legally binding construction document, cloud-based model management, user-friendly on-site mobile BIM software and strong leadership.

A unique case is studied where BIM is used throughout all project phases as a single source of information and communication platform. No 2D paper drawings were used on-site and the Total BIM case study highlights the importance of a new digitalized construction process.

The COVID-19 pandemic significantly increased demand for medical and protective equipment by frontline health workers, as well as the general community, causing the supply chain to stretch beyond capacity, an issue further heightened by geographical and political lockdowns. Various 3D printing technologies were quickly utilised by businesses, institutions and individuals to manufacture a range of products on-demand, close to where they were needed. This study gathered data about 91 3D printed projects initiated prior to April 1, 2020, as the virus spread globally. It found that 60% of products were for personal protective equipment, of which 62% were 3D printed face shields. Fused filament fabrication was the most common 3D print technology used, and websites were the most popular means of centralising project information. The project data provides objective, quantitative insight balanced with qualitative critical review of the broad trends, opportunities and challenges that could be used by governments, health and medical bodies, manufacturing organisations and the 3D printing community to streamline the current response, as well as plan for future crises using a distributed, flexible manufacturing approach.

The paper examines academic historians' information interactions with material from digital historical-newspaper collections as the research process unfolds.

The study employed qualitative analysis from in-depth interviews with Finnish history scholars who use digitised historical newspapers as primary sources for their research. A model for task-based information interaction guided the collection and analysis of data.

The study revealed numerous information interactions within activities related to task-planning, the search process, selecting and working with the items and synthesis and reporting. The information interactions differ with the activities involved, which call for system support mechanisms specific to each activity type. Various activities feature information search, which is an essential research method for those using digital collections in the compilation and analysis of data. Furthermore, application of quantitative methods and multidisciplinary collaboration may be shaping culture in history research toward convergence with the research culture of the natural sciences.

For sustainable digital humanities infrastructure and digital collections, it is of great importance that system designers understand how the collections are accessed, why and their use in the real-world context. The study enriches understanding of the collections' utilisation and advances a theoretical framework for explicating task-based information interaction.

This study aims to determine the requirements and find out the challenges for the use of digital library services for rural areas of Capricorn District Municipality, Limpopo province. The research questions of the study are: What are the requirements for the use of digital library services in rural areas of Capricorn District Municipality? What are the challenges of accessing digital library services in rural areas?

Data was analysed thematically and deductively in this study, as researcher required to accomplish the purpose of the study through consistent structure (Zalaghi and Khazaei, 2016). In deductive analysis, the researcher starts with a set of categories, which are then used to categorize and organize data (Bertram and Christiansen, 2020). The researcher got familiar with data from the interviewing process and when transcribing data from audio tape. The transcription process was done for the coding purposes. Coding allows the researcher to simplify and focus on specific characteristics of data.

The study findings advocate for the establishment of digital libraries in rural areas. The library authorities are challenged to adapt digital ways of information provision. Since librarians have been providing digital content in libraries for use on users’ laptops and other gadgets, this implies that the Department of Sport, Arts and Culture has been lagging behind in finding innovative ways to provide information, especially in rural areas. To successfully keep libraries as sources of information, transformative measures have to be taken, and where possible, revisit the policies and keep drifting with the societal changes. The library authorities have to delve into new ways of providing LIS to the communities. Unquestionably, information and communication technologies have penetrated our societies and became a way of life. In addition, there are unlimited benefits which can be derived from digital technologies, especially given the lack of physical libraries in rural areas.

To the best of the authors’ knowledge, the academic research is original and has not been published anywhere before.

Science policy and practice for open access (OA) books is a rapidly evolving area in the scholarly domain. However, there is much that remains unknown, including how many OA books there are and to what degree they are included in preservation coverage. The purpose of this study is to contribute towards filling this knowledge gap in order to advance both research and practice in the domain of OA books.

This study utilized open bibliometric data sources to aggregate a harmonized dataset of metadata records for OA books (data sources: the Directory of Open Access Books, OpenAIRE, OpenAlex, Scielo Books, The Lens, and WorldCat). This dataset was then cross-matched based on unique identifiers and book titles to openly available content listings of trusted preservation services (data sources: Cariniana Network, CLOCKSS, Global LOCKSS Network, and Portico). The web domains of the OA books were determined by querying the web addresses or digital object identifiers provided in the metadata of the bibliometric database entries.

In total, 396,995 unique records were identified from the OA book bibliometric sources, of which 19% were found to be included in at least one of the preservation services. The results suggest reason for concern for the long tail of OA books distributed at thousands of different web domains as these include volatile cloud storage or sometimes no longer contained the files at all.

Data quality issues, varying definitions of OA across services and inconsistent implementation of unique identifiers were discovered as key challenges. The study includes recommendations for publishers, libraries, data providers and preservation services for improving monitoring and practices for OA book preservation.

This study provides methodological and empirical findings for advancing the practices of OA book publishing, preservation and research.

The purpose of this study is to explore the impact of the Covid-19 crisis at the level of individual information behavior among citizens from the German-speaking countries, Austria, Germany and Switzerland.

An online survey was conducted among 308 participants gathered through convenience sampling in April and May 2020, focusing on how citizens changed their mix and usage intensity of information sources and according to which criteria they chose them during the Covid-19 crisis. A Wilcoxon signed-rank test was used for testing central tendencies. Effect sizes were considered to support the interpretation.

The results show first that the Covid-19 crisis has led to an increased demand for reliable information. This goes alongside a significant increased use of public broadcasting, newspapers and information provided by public organizations. Second, the majority (84%) of the participants reported being satisfied with the information supply during the Covid-19 crisis. Participants who were less satisfied with the information supply used reliable sources significantly less frequently, specifically public television, national newspapers and information provided by public organizations. Third, the amount of Covid-19-related information led some participants to a feeling of information overload, which resulted in a reduction of information seeking and media use.

This paper is one of the first to analyze changes of information behavior patterns of individuals during crises in the current information environment, considering the diversity of resources used by individuals.

In response to shortages in personal protective equipment (PPE) during the COVID-19 pandemic, makers, community groups and manufacturers around the world utilised 3D printing to fabricate items, including face shields and face masks for healthcare workers and the broader community. In reaction to both local and global needs, numerous designs emerged and were shared online. In this paper, 37 face shields and 31 face masks suitable for fused filament fabrication were analysed from a fabrication perspective, documenting factors such as filament use, time to print and geometric qualities. 3D print times for similar designs varied by several hours, meaning some designs could be produced in higher volumes. Overall, the results show that face shields were approximately twice as fast to 3D print compared to face masks and used approximately half as much filament. Additionally, a face shield typically required 1.5 parts to be 3D printed, whereas face masks required five 3D printed parts. However, by quantifying the print times, filament use, 3D printing costs, part dimensions, number of parts and total volume of each design, the wide variations within each product category could be tracked and evaluated. This data and objective analysis will help makers, manufacturers, regulatory bodies and researchers consolidate the 3D printing response to COVID-19 and optimise the ongoing strategy to combat supply chain shortages now and in future healthcare crises.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.