Search results

Building information modeling (BIM) is mostly limited to the design phase where two parallel processes exist, i.e. creating 2D-drawings and BIM. Towards the end of the design process, BIM becomes obsolete as focus shifts to producing static 2D-drawings, which leads to a lack of trust in BIM. In Scandinavia, a concept known as Total BIM has emerged, which is a novel “all-in” approach where BIM is the single source of information throughout the project. This paper's purpose is to investigate the overall concept and holistic approach of a Total BIM project to support implementation and strategy work connected to BIM.

Qualitative data were collected through eight semi-structured interviews with digitalization leaders from the case study project. Findings were analyzed using a holistic framework to BIM implementation.

The Total BIM concept was contingent on the strong interdependences between commonly found isolated BIM uses. Four main success factors were identified, production-oriented BIM as the main contractual and legally binding construction document, cloud-based model management, user-friendly on-site mobile BIM software and strong leadership.

A unique case is studied where BIM is used throughout all project phases as a single source of information and communication platform. No 2D paper drawings were used on-site and the Total BIM case study highlights the importance of a new digitalized construction process.

This paper aims to prompt ideas amongst readers (especially librarians) about how they can become active partners in knowledge dissemination amongst concerned user groups by implementing 3D printing technology under the “Makerspace.”

The paper provides a brief account of various tools and techniques used by veterinary and animal sciences institutions for information dissemination amongst the stakeholders and associated challenges with a focus on the use of 3D printing technology to overcome the bottlenecks. An overview of the 3D printing technology has been provided following the instances of use of this novel technology in veterinary and animal sciences. An initiative of the University Library, Guru Angad Dev Veterinary and Animal Sciences University, Ludhiana, to harness the potential of this technology in disseminating information amongst livestock stakeholders has been discussed.

3D printing has the potential to enhance learning in veterinary and animal sciences by providing hands-on exposure to various anatomical structures, such as bones, organs and blood vessels, without the need for a cadaver. This approach enhances students’ spatial understanding and helps them better understand anatomical concepts. Libraries can enhance their visibility and can contribute actively to knowledge dissemination beyond traditional library services.

The ideas about how to harness the potential of 3D printing in knowledge dissemination amongst livestock sector stakeholders have been elaborated. This promotes creativity amongst librarians enabling them to think how they can engage in knowledge dissemination thinking out of the box.

This paper focuses on the use of e-resources by research scholars and post-graduate students at Kashmir University. The main aim is to determine the use of e-resources, users skills in handling e-resources and the purpose of their use. Further, this paper aims to highlight the problems faced by research scholars and post-graduate students in accessing e-resources.

The survey was conducted through a structured questionnaire circulated among 250 research scholars, both (M.Phil./Ph.D.) and post-graduate students, from different departments of Kashmir University, and the response rate was 80%. Random sample method was used for the selection of respondents and interacting with them. The responses received from the research scholars to 14 questions are presented in the form of tables.

Major findings of the study reveal that the majority of the students reported using electronic journal resources for various purposes including working on assignments, research proposal writing, literature review writing, research report writing, current awareness and leisurely exploration of ongoing scientific debates through peer-reviewed papers. The challenges encountered in the use of electronic journal resources include a power outage, inadequate bandwidth, slow download speed, inability to access the resources from home, lack of training, lack of awareness, limited access to computers and difficulty in searching. The paper concludes that electronic resources have become an integral part of the information needs of research scholars’ post-graduate students at Kashmir University. Further, it finds that e-resources can be good substitutes for conventional resources, if the access is fast, and more computer terminals are installed to provide fast access to e-resources. Finally, recommendations for improving the use of electronic journal resources are provided.

The paper restrains the study exclusively to use of e-resources by the research scholars and post-graduate students of Kashmir University.

The paper highlights the use of e-resources by research scholars and post-graduate students of Kashmir University and makes some constructive suggestions for the improvement of electronic resources and services. This is the first time an effort has been made to assess the use of electronic resources by post-graduate students at Kashmir University. The study could be used to assess the post-graduate students’ needs for electronic resources at the Kashmir University and other users in higher learning institutions.

In pursuit of affordable and nutrient-rich food alternatives, the symbiotic culture of bacteria and yeast (SCOBY) emerged as a selected food ink for 3D printing. The purpose of this paper is to harness SCOBY’s potential to create cost-effective and nourishing food options using the innovative technique of 3D printing.

This work presents a comparative analysis of the printability of SCOBY with blends of wheat flour, with a focus on the optimization of process variables such as printing composition, nozzle height, nozzle diameter, printing speed, extrusion motor speed and extrusion rate. Extensive research was carried out to explore the diverse physical, mechanical and rheological properties of food ink.

Among the ratios tested, SCOBY, with SCOBY:wheat flour ratio at 1:0.33 exhibited the highest precision and layer definition when 3D printed at 50 and 60 mm/s printing speeds, 180 rpm motor speed and 0.8 mm nozzle with a 0.005 cm³/s extrusion rate, with minimum alteration in colour.

Food layered manufacturing (FLM) is a novel concept that uses a specialized printer to fabricate edible objects by layering edible materials, such as chocolate, confectionaries and pureed fruits and vegetables. FLM is a disruptive technology that enables the creation of personalized and texture-tailored foods, incorporating desired nutritional values and food quality, using a variety of ingredients and additions. This research highlights the potential of SCOBY as a viable material for 3D food printing applications.

Additive manufacturing also known as 3D printing is an evolving advanced manufacturing technology critical for the new era of complex machinery and operating systems. Manufacturing systems are increasingly faced with risk of attacks not only by traditional malicious actors such as hackers and cyber-criminals but also by some competitors and organizations engaged in corporate espionage. This paper aims to elaborate a plausible risk practice of designing and demonstrate a case study for the compromised-based malicious for polymer 3D printing system.

This study assumes conditions when a machine was compromised and evaluates the effect of post compromised attack by studying its effects on tensile dog bone specimens as the printed object. The designed algorithm removed predetermined specific number of layers from the tensile samples. The samples were visually identical in terms of external physical dimensions even after removal of the layers. Samples were examined nondestructively for density. Additionally, destructive uniaxial tensile tests were carried out on the modified samples and compared to the unmodified sample as a control for various mechanical properties. It is worth noting that the current approach was adapted for illustrating the impact of cyber altercations on properties of additively produced parts in a quantitative manner. It concurrently pointed towards the vulnerabilities of advanced manufacturing systems and a need for designing robust mitigation/defense mechanism against the cyber altercations.

Density, Young’s modulus and maximum strength steadily decreased with an increase in the number of missing layers, whereas a no clear trend was observed in the case of % elongation. Post tensile test observations of the sample cross-sections confirmed the successful removal of the layers from the samples by the designed method. As a result, the current work presented a cyber-attack model and its quantitative implications on the mechanical properties of 3D printed objects.

To the best of the authors’ knowledge, this is the original work from the team. It is currently not under consideration for publication in any other avenue. The paper provides quantitative approach of realizing impact of cyber intrusions on deteriorated performance of additively manufactured products. It also enlists important intrusion mechanisms relevant to additive manufacturing.

To elaborate the nature of fact-checking in the domain of political information by examining how fact-checkers assess the validity of claims concerning the Russo-Ukrainian conflict and how they support their assessments by drawing on evidence acquired from diverse sources of information.

Descriptive quantitative and qualitative content analysis of 128 reports written by the fact-checkers of Snopes – an established fact-checking organisation – during the period of 24 February 2022 – 28 June, 2023. For the analysis, nine evaluation grounds were identified, most of them inductively from the empirical material. It was examined how the fact-checkers employed such grounds while assessing the validity of claims and how the assessments were bolstered by evidence acquired from information sources such as newspapers.

Of the 128 reports, the share of assessments indicative of the invalidity of the claims was 54.7%, while the share of positive ratings was 26.7%. The share of mixed assessments was 15.6%. In the fact-checking, two evaluation grounds, that is, the correctness of information and verifiability of an event presented in a claim formed the basis for the assessment. Depending on the topic of the claim, grounds such as temporal and spatial compatibility, as well as comparison by similarity and difference occupied a central role. Most popular sources of information offering evidence for the assessments include statements of government representatives, videos and photographs shared in social media, newspapers and television programmes.

As the study concentrated on fact-checking dealing with political information about a specific issue, the findings cannot be extended to concern the fact-checking practices in other contexts.

The study is among the first to characterise how fact-checkers employ evaluation grounds of diverse kind while assessing the validity of political information.

This study aims to examine the effect of Industry 4.0 technology on resilience in established cross-border supply chain(s) (SC).

A literature review provides insight into the resilience capabilities of cross-border SC. The research uses a case study of operational international SC: the producers, importers, logistics companies and UK Government (UKG) departments. Semi-structured interviews determine the resilience capabilities and approaches of participants within cross-border SC and how implementing an Industry 4.0 Internet of Things (IoT) and capitals Distributed Ledger (blockchain) based technology platform changes SC resilience capabilities and approaches.

A blockchain-based platform introduces common assured data, reducing data duplication. When combined with IoT technology, the platform improves end-to-end SC visibility and information sharing. Industry 4.0 technology builds collaboration, trust, improved agility, adaptability and integration. It enables common resilience capabilities and approaches that reduce the de-coupling between government agencies and participants of cross-border SC.

The case study presents challenges specific to UKG’s customs border operations; research needs to be repeated in different contexts to confirm findings are generalisable.

Operational SC and UKG customs and excise departments must align their resilience strategies to gain full advantage of Industry 4.0 technologies.

Case study research shows how Industry 4.0 technology reduces the de-coupling between the SC and UKG, enhancing common resilience capabilities within established cross-border operations. Improved information sharing and SC visibility provided by IoT and blockchain technologies support the development of resilience in established cross-border SC and enhance interactions with UKG at the customs border.

Although there is a growing body of work on immigrants' information behavior, little is known about the pre-arrival information experiences of immigrants who consult formal information sources such as immigration agents. Drawn from a larger study on the information behavior of immigrants, this paper mainly reports the semi-structured interview findings on the pre-arrival information experiences of Bangladeshi immigrants who used formal information sources with discussion on how that affected their post-arrival settlement into Canada.

The study used a mixed method approach with semi-structured interviews (n = 60) and surveys (n = 205) with participants who arrived in Canada between the years of 1971 and 2017. Data were collected from May 2017 to February 2018.

Although the overall scope of the original study is much larger, this paper features findings on the pre-arrival information experiences derived mainly from an analysis of interview data. This study provides insights into the pre-arrival information experiences of Bangladeshi immigrants consulting formal information sources such as immigration firms, individual immigration consultants and more formal government agencies. The author introduces a new concept of “information crafting” by exploring the negative consequences of selective information sharing by immigration consultants/agents in newcomers' settlements in Canada, primarily positive information about life in Canada, sometimes with exaggeration and falsification. The interview participants shared story after the story of the settlement challenges they faced after arriving in Canada and how the expectations they built through the information received from immigration consultants and government agencies did not match after arrival. This study emphasizes the importance of providing comprehensive information about life in Canada to potential newcomers so that they can make informed decisions even before they apply.

The findings of this study have theoretical and practical implications for policy and research. This study provides insights into the complicated culturally situated pre-arrival information experiences of Bangladeshi immigrants. Moreover, the study findings encourage researchers in various disciplines, including psychology, migration studies and geography, to delve more deeply into newcomers' information experiences using an informational lens to examine the information newcomers receive from diverse sources and their effects on their post-arrival settlement in a new country. The study challenges the general assumptions that formal information sources are always reputable, useful, and comprehensive, and it provides some future directions for research that seeks to understand the culturally situated information behavior of diverse immigrant groups.

This paper aims to concentrate on recent innovations in flexible wearable sensor technology tailored for monitoring vital signals within the contexts of wearable sensors and systems developed specifically for monitoring health and fitness metrics.

In recent decades, wearable sensors for monitoring vital signals in sports and health have advanced greatly. Vital signals include electrocardiogram, electroencephalogram, electromyography, inertial data, body motions, cardiac rate and bodily fluids like blood and sweating, making them a good choice for sensing devices.

This report reviewed reputable journal articles on wearable sensors for vital signal monitoring, focusing on multimode and integrated multi-dimensional capabilities like structure, accuracy and nature of the devices, which may offer a more versatile and comprehensive solution.

The paper provides essential information on the present obstacles and challenges in this domain and provide a glimpse into the future directions of wearable sensors for the detection of these crucial signals. Importantly, it is evident that the integration of modern fabricating techniques, stretchable electronic devices, the Internet of Things and the application of artificial intelligence algorithms has significantly improved the capacity to efficiently monitor and leverage these signals for human health monitoring, including disease prediction.

This study aims to discover how domain familiarity and language affect the cognitive load and the strategies applied for the evaluation of search engine results pages (SERP).

This study used an experimental research design. The pattern of the experiment was based upon repeated measures design. Each student was given four SERPs varying in two dimensions: language and content. The criteria of students to decide on the three best links within the SERP, the reasoning behind their selection, and their perceived cognitive load of the given task were the repeated measures collected from each participant.

The evaluation criteria changed according to the language and task type. The cognitive load was reported higher when the content was presented in English or when the content was academic. Regarding the search strategies, a majority of students trusted familiar sources or relied on keywords they found in the short description of the links. A qualitative analysis showed that students can be grouped into different types according to the reasons they stated for their choices. Source seeker, keyword seeker and specific information seeker were the most common types observed.

This study has an international scope with regard to data collection. Moreover, the tasks and findings contribute to the literature on information literacy.