Search results

The research evaluated the feasibility of 3D dynamic fit utilizing female compression tops by comparatively analyzing the virtual and actual dynamic fit.

Six female participants were 3D body-scanned and photographed in compression tops in four types of athletic movements (pull-up, kettlebell swing, circle-crunch and sit-up). Fit measurements, waist cross-sectional areas, waist width, waist depth, numerical simulation of clothing pressure (kPa) and objective pressure measurements (kPa) were collected from 3D virtual animation, 3D fit scan data and actual photos with the four types of athletic motions. The data were comparatively investigated between virtual and actual dynamic fit.

The 3D-animated body was not reflected with human body deformation because only bone structure was changed while maintaining the constant forms of muscle and body surface in athletic movements. Due to this consistency of virtual dynamic fit, there were significant differences with the actual dynamic fit at the top length, shoulder width and waist cross-sectional areas. Also, the virtual dynamic pressure indicated significantly higher levels than the objective dynamic pressure while presenting no significant correlations at the front neckline, breast, lateral waist, upper back, back armhole and back waist.

This study is the first to verify multiple aspects of virtual dynamic fit using 3D digital technology. This study provided useful information about which aspects of the current virtual animation need to be improved to apply in the dynamic fit evaluation.

The purpose of this study is to examine the factors that affect managers’ ethical decision-making in export-oriented readymade garments in Bangladesh.

This is an empirical study based on the quantitative approach undertaking a cross-sectional survey method where a convenience sampling technique was applied. The analysis was done using partial least square structural equation model applying Smart-PLS version 3.0.

This study confirmed that all the components of cognitive appraisal processes, including perceived severity, perceived vulnerability, response efficacy and self-efficacy, have a significant influence on attitude. Attitude, in turn, mediates the relationship between these variables and the behavioural intention of ethical practice, except for perceived vulnerability. Besides, moral obligation is found to mediate the relationship between attitude, self-efficacy and the behavioural intention of ethical decision-making. The study also found that ethical climate and subjective norms have a direct influence on behavioural intention. Furthermore, behavioural intention, ethical climate and self-efficacy are positively related to actual decision-making behaviour. However, this study did not find any direct effect of subjective norms on moral obligation.

The organization should include an emphasis on building ethical culture and setting an ethical code of conduct within the organization to sustain ethical practice within employees. However, the practitioner should work on enhancing self-efficacy to curb unethical practices by individuals.

This research contributes to the management of garments manufacturers by a practical and theoretical understanding of what influences the ethical behavioural decision-making process. Valuable guidelines are provided on the ethical decision-making process in the garments manufacturing companies for future researchers.

Intense interest has been shown in creating new and effective biocide agents as a result of changes in bacterial isolates, bacterial susceptibility to antibiotics, an increase in patients with burns and wounds and the difficulty of treating infections and antimicrobial resistance. Woven, nonwoven and knitted materials are used to make dressings; however, nonwoven dressings are becoming more popular because of their softness and high absorption capacity. Additionally, textiles have excellent geometrical, physical and mechanical features including three-dimensional structure availability, air, vapor and liquid permeability, strength, extensibility, flexibility and diversity of fiber length, fineness and cross-sectional shapes. It is necessary to treat every burn according to international protocol and along with it has to focus on particular problems of patients and the best possible results.

The objective of this paper is to conduct a thorough examination of research pertaining to the utilization of textiles, as well as alternative materials and innovative techniques, in the context of burn wound dressings. Through a critical analysis of the findings, this study intends to provide valuable insights that can inform and guide future research endeavors in this field.

In the past years, there have been several dressings such as xeroform petrolatum gauze, silver-impregnated dressings, biological dressings, hydrocolloid dressings, polyurethane film dressings, silicon-coated nylon dressings, dressings for biosynthetic skin substitutes, hydrogel dressings, newly developed dressings, scaffold bandages, Sorbalgon wound dressing, negative pressure therapy, enzymatic debridement and high-pressure water irrigation developed for the fast healing of burn wounds.

This research conducts a thorough analysis of the role of textiles in modern burn wound dressings.

The purpose of this paper is to investigate the distribution characteristics of airflow in mine ventilation suits with different pipeline structures when the human body is bent at various angles. On this basis, the stress points are extracted to investigate the pressure variation of a ventilation suit under different ventilation rates and pipeline structures.

Based on the three-dimensional human body scanner, portable pressure test and other instruments, a human experiment was conducted in an artificial cabin. The study analyzed and compared the distribution characteristics of clearance under three different pipeline structures, as well as the pressure variation of the ventilation suit.

The study found that the clearance in front of two pipeline structures gradually increased in size as the degree of bending increased, and there was minimal clearance in the chest and back. The longitudinal structure exhibits a significant decrease in clearance compared to the spiral structure. The pressure value of the spiral pipeline structure with the same ventilation volume is low, followed by the transverse structure, while the longitudinal structure has the highest pressure value. The increase in clothing pressure value of a spiral pipeline structured ventilation suit with varying ventilation volumes is minimal.

The ventilation suit has a promising future as a type of personal protective equipment for mitigating heat damage in mines. It is of great value to study the pipeline structure of the ventilation suit for human comfort.

This study establishes the principles and process steps of a new basic trousers pattern using measurements obtained according to the rules of the anthropometric measurement system. The newly developed pattern-making system in this study will be called the “Anthropometric Measurements Based Pattern Making System” (AnMePa). It is aimed at producing trousers that are more fitting to the body, thanks to this pattern-making system.

In this research, four pattern-making systems used in many parts of the world were compared with the “Anthropometric Measurements Based Pattern Making System” (AnMePa) with regard to the overall appearance and body fit of trousers prepared according to these systems. 10 virtual mannequins (VM) with different adult female body measurements were created, and trousers patterns were prepared for these mannequins. The trousers’ patterns were made and dressed on the mannequins in a 3D virtual dressing system. The body fit of the virtual garments was evaluated by five experts. The scores given by the experts were evaluated using the fuzzy logic method.

According to the results, it is seen that the new basic trousers pattern developed by utilizing the anthropometric measurement system, AnMePa, provides the best body fit among the basic trousers patterns created according to the other examined pattern-making systems. The combination of 3D virtual dressing and fuzzy logic in the evaluation of garment body fit is considered an innovative method for the future of fashion design and production.

In the developed AnMePa, unlike the existing pattern-making systems, values that can be associated with the body measurements of individuals in a way that could be suitable for each community were used instead of constant values in the pattern-making process. Furthermore, the integration of 3D virtual fitting and fuzzy logic in assessing garment fit is considered a pioneering approach with significant implications for the future landscape of fashion design and production.

This study aims to quantify and prioritize the main causes of lean wastes and to apply reduction methods by employing better waste cause identification methodologies.

We employed fuzzy techniques for order preference by similarity to the ideal solution (FTOPSIS), fuzzy analytical hierarchy process (FAHP), and failure mode effect analysis (FMEA) to determine the causes of defects. To determine the current defect cause identification procedures, time studies, checklists, and process flow charts were employed. The study focuses on the sewing department of a clothing industry in Addis Ababa, Ethiopia.

These techniques outperform conventional techniques and offer a better solution for challenging decision-making situations. Each lean waste’s FMEA criteria, such as severity, occurrence, and detectability, were examined. A pairwise comparison revealed that defect has a larger effect than other lean wastes. Defects were mostly caused by inadequate operator training. To minimize lean waste, prioritizing their causes is crucial.

The research focuses on a case company and the result could not be generalized for the whole industry.

The study used quantitative approaches to quantify and prioritize the causes of lean waste in the garment industry and provides insight for industrialists to focus on the waste causes to improve their quality performance.

The methodology of integrating FMEA with FAHP and FTOPSIS was the new contribution to have a better solution to decision variables by considering the severity, occurrence, and detectability of the causes of wastes. The data collection approach was based on experts’ focus group discussion to rate the main causes of defects which could provide optimal values of defect cause prioritization.

This study aims to increase the novelty of clothing design and fabric texture. The element library that can be used for design is systematically summarized. The element database can also be continuously filled according to the existing logic to realize the diversity of design. Improve the theory of fashion design, expand the designer's design ideas and improve design efficiency. Clear design steps and logic can help students and machines learn the design process and promote the development of intelligent design. And verify the feasibility of the simulation software to assist pleated clothing design.

Firstly, according to the logical framework of origami theory, different innovative designs and combined designs are made for the basic units of hyperbolic paraboloid, and the element library that can be used for design is systematically summarized. This database can also be continuously filled according to the existing logic to realize the diversity of design. Secondly, it summarizes three methods of pleated element filling clothing – uniform filling method, the irregular filling method and geometric addition method – that improve the theory of fashion design, expand the designer's design ideas and improve design efficiency. Clear design steps and logic can help students and machines learn the design process and promote the development of intelligent design. Finally, the virtual software is used to simulate the effect of pleated clothing, and the three-dimensional simulation software 3dclo is used to make an empirical study on the application of hyperbolic paraboloid origami in clothing pleated design to verify the feasibility of the simulation software to assist pleated clothing design.

The theoretical results of hyperbolic paraboloid origami are collected and arranged to establish the element library of hyperbolic paraboloid origami. The results expand the designer's design ideas and auxiliary design technology and improve the design efficiency using a sample of hyperbolic paraboloid fabric to verify its practicability and three-dimensional clothing simulation software for exploring the design. The design rules of hyperbolic paraboloid clothing and the realization method of fabric are summarized, including the expansion and combing of elements, the application of size and shape and the method of combination.

Owing to the hyperbolic paraboloid origami’s length shrinkage, the loose computation of clothing requires targeted computation. This paper solely applies a paper model for estimating the shrinkage, and then we tend to subsequently explore the way to precisely compute the porosity, to determine the existing differences in the two-dimensional shrinkage of hyperbolic paraboloid creases of varying materials and to know if the clothing after large-scale production is capable of reaching the anticipated value.

The exploration of this experiment brings a new 3D experiment process to the design process.

This experiment brings new possibilities for the development of virtual fitting and virtual display in the industry.

This study combines hyperbolic paraboloid origami and clothing and combs and expands the unit with logical thinking to expand the designer's design ideas.

The aim of this review is to present together the studies on textile-based moisture sensors developed using innovative technologies in recent years.

The integration levels of the sensors studied with the textile materials are changing. Some research teams have used a combination of printing and textile technologies to produce sensors, while a group of researchers have used traditional technologies such as weaving and embroidery. Others have taken advantage of new technologies such as electro-spinning, polymerization and other techniques. In this way, they tried to combine the good working efficiency of the sensors and the flexibility of the textile. All these approaches are presented in this article.

The presentation of the latest technologies used to develop textile sensors together will give researchers an idea about new studies that can be done on highly sensitive and efficient textile-based moisture sensor systems.

In this paper humidity sensors have been explained in terms of measuring principle as capacitive and resistive. Then, studies conducted in the last 20 years on the textile-based humidity sensors have been presented in detail. This is a comprehensive review study that presents the latest developments together in this area for researchers.

The case is written on the basis of published sources only.

Doodlage, a start-up incorporated in 2012 by Kriti Tula, Paras Arora and Vaibhav Kapoor, used discarded waste to create sustainable fashion products. It had a first-mover advantage in recycled fashion goods in the first 10 years of its existence. The company contributed to sustainable fashion by providing an alternative to fast fashion production, creating enormous clothing waste and environmental degradation. In the first quarter of 2022, it saved and reused 15,000 m of fabric waste. From 2018 to 2021, the company grew 150% annually, targeting the right customers and regions to expand its business. It ensured that postproduction industrial waste and postconsumption garments were used to produce clothes. It also confirmed that the waste generated in its fabric screening process was used to create stationery items and other valuable accessories.

However, the sustainable fashion model that gave the company a competitive advantage became obsolete in 2022 due to increasing competition in the industry as various players using unique ideas entered the market. The company is encountering operational and logistical challenges that are affecting its performance. The demand for its products was also subdued due to high prices of upcycled and recycled clothes and less consumer spending post-COVID pandemic. The competitors of Doodlage offered multiple products produced using environmentally friendly farming and manufacturing techniques, attracting sustainable purchasers. What should be the new portfolio of products for the company to explore future growth opportunities? Considering their vast price, can consumers be encouraged to buy upcycled clothes? How should the company ride the winds of change in the industry?

The instructor should initiate the class discussion by asking questions such as how frequently do you shop for clothes? Do you care about the fabric of your apparel? After you discard your clothes, do you think about where these goods finally end up? Data on the amount of total waste generated in the fashion industry should be communicated to students to connect it with the importance of the concept of circular economy. Post this, the instructor should introduce the business model of Doodlage to bring the discussion into the context of the fashion industry before going ahead to discuss the company’s dilemma.

This study aims to explore the managerial conception of the determinants and barriers of sustainability integration into management control systems (MCS) of manufacturing companies in Sri Lanka. Although existing literature has explored the factors that influence the adoption of specific management controls to handle environmental and social issues, the role of management conception has been underrepresented. Specifically, literature is scarce in identifying contextual and organisational factors that influence corporates beyond mere adoption of controls but to integrate with regular controls, especially in developing countries such as Sri Lanka.

A multiple case study approach has been used to identify the management conception of barriers and enablers for sustainability control integration. The analysis is conducted based on a theoretical framework extending the work of Gond et al. (2012) and George et al. (2016). To obtain an in-depth and multifaceted view, semi-structured interviews were conducted with managers in charge of different functional departments of five manufacturing companies.

The findings identified managers’ perceived factors, such as environmental impact, stakeholder pressure (customer, competitor and regulatory authorities) and top management commitment, showing a clear difference between strongly and weakly integrated companies. Contrary to the literature, domestic regulatory pressure and multinational ownership do not sufficiently drive MCS sustainability integration.

The findings have implications for managers and practitioners to anticipate the potential barriers and determinants of sustainability integration and provide guidance to take proper measures to deal with them when designing and implementing their MCS.

The study adds value to the literature by presenting a theoretical framework based on the triangulation of different theories to recognise the significance of management idea in sustainable integration. Furthermore, because sustainable integration of MCS is a novel idea, this research is one of the earlier attempts to highlight problems from the perspective of developing countries.