Search results

The performance of oil-filled pressure cores is very much affected by the corrugated diaphragm and the oil filling volume. The purpose of this paper is to show the effects of different corrugated diaphragms, different oil filling volumes and different treatments of the corrugated diaphragms on the performance of pressure sensors.

Pressure-sensitive cores with different diaphragm diameters, different diaphragm ripple numbers and different oil filling volumes are produced, and thermal cycling is introduced to improve the diaphragm performance, and finally the performance of each pressure-sensitive core is tested and the test data are analyzed and compared.

The experimental results show that the larger the diameter of the corrugated diaphragm used for encapsulation, the better the performance. For pressure-sensitive cores using smaller diameter corrugated diaphragms, the performance of one corrugation is better than that of two corrugations. When the number of corrugations and the diameter are the same size, the performance of the outer ring of the diaphragm with concave corrugations is better than that with convex corrugations. At the same time, the diaphragm after thermal cycling treatment and appropriate reduction of encapsulated oil filling can improve the performance of the pressure-sensitive core.

By exploring the effects of corrugated diaphragm and oil filling volume on the performance of oil-filled pressure cores, the design of oil-filled pressure sensors can be guided to improve sensor performance.

The research evaluated the feasibility of 3D dynamic fit utilizing female compression tops by comparatively analyzing the virtual and actual dynamic fit.

Six female participants were 3D body-scanned and photographed in compression tops in four types of athletic movements (pull-up, kettlebell swing, circle-crunch and sit-up). Fit measurements, waist cross-sectional areas, waist width, waist depth, numerical simulation of clothing pressure (kPa) and objective pressure measurements (kPa) were collected from 3D virtual animation, 3D fit scan data and actual photos with the four types of athletic motions. The data were comparatively investigated between virtual and actual dynamic fit.

The 3D-animated body was not reflected with human body deformation because only bone structure was changed while maintaining the constant forms of muscle and body surface in athletic movements. Due to this consistency of virtual dynamic fit, there were significant differences with the actual dynamic fit at the top length, shoulder width and waist cross-sectional areas. Also, the virtual dynamic pressure indicated significantly higher levels than the objective dynamic pressure while presenting no significant correlations at the front neckline, breast, lateral waist, upper back, back armhole and back waist.

This study is the first to verify multiple aspects of virtual dynamic fit using 3D digital technology. This study provided useful information about which aspects of the current virtual animation need to be improved to apply in the dynamic fit evaluation.

The purpose of this paper is to investigate the distribution characteristics of airflow in mine ventilation suits with different pipeline structures when the human body is bent at various angles. On this basis, the stress points are extracted to investigate the pressure variation of a ventilation suit under different ventilation rates and pipeline structures.

Based on the three-dimensional human body scanner, portable pressure test and other instruments, a human experiment was conducted in an artificial cabin. The study analyzed and compared the distribution characteristics of clearance under three different pipeline structures, as well as the pressure variation of the ventilation suit.

The study found that the clearance in front of two pipeline structures gradually increased in size as the degree of bending increased, and there was minimal clearance in the chest and back. The longitudinal structure exhibits a significant decrease in clearance compared to the spiral structure. The pressure value of the spiral pipeline structure with the same ventilation volume is low, followed by the transverse structure, while the longitudinal structure has the highest pressure value. The increase in clothing pressure value of a spiral pipeline structured ventilation suit with varying ventilation volumes is minimal.

The ventilation suit has a promising future as a type of personal protective equipment for mitigating heat damage in mines. It is of great value to study the pipeline structure of the ventilation suit for human comfort.

Despite the critical role of the policy environment in facilitating the advancement of building information modeling (BIM) as a systemic innovation to reshape traditional facility design, construction and operation processes, scant scholarly attention has been paid to systematically investigating how and why complex BIM policies are concretely and gradually implemented in different regional contexts from a dynamic policy diffusion perspective. This study aims to empirically investigate how different types of BIM policy instruments are dynamically implemented in heterogeneous regions over time and how the diffusion of BIM policies across different regions is comprehensively impacted by both internal efficiency needs and external legitimacy pressures.

This study employed a positivist research paradigm in which BIM policy data from 182 prefecture-level and above cities in China during 2011–2022 were analyzed with quantitative approaches for theory verification. Based on the content analysis of the evolutionary characteristics of the adopted BIM policy instruments in heterogeneous regions over time, the event history analysis (EHA) method was then used to further examine the mechanisms underlying the diffusion of BIM policies across different regions.

The content analysis results show that while environmental instruments (such as technological integration and goal planning) are the primary policy instruments currently adopted in China, recent years have also witnessed increasing adoptions of supply-side instruments (such as fiscal support and information support) and demand-side instruments (such as demonstration projects and tax incentives). After controlling for the impacts of regional fiscal and technical resources, the EHA results illustrate that BIM policy adoption positively relates to regional construction industry scale but negatively relates to regional industry productivity and that compared with public pressures from industry participants, vertical pressures from the central government and horizontal pressures from neighboring regions are more substantial drivers for policy adoption.

As an exploratory effort of using a dynamic policy diffusion perspective to systematically investigate how BIM policies are adopted in heterogeneous regional contexts to facilitate BIM advancement, this study not only characterizes the complexity and dynamics of BIM policies but also provides deepened understandings of the mechanisms underlying policy adoption in the conservative construction industry. The findings hold implications for how multifarious policy instruments can be more effectively and dynamically adopted to facilitate the advancement of BIM and related technologies as innovative solutions in the construction domain.

This study aims to investigate how firms of different sizes respond to competitive pressure from peers.

This study employs machine learning techniques to measure competitive pressure based on management discussion and analysis (MD&A) documents and then utilises the constructed pressure indicator to explore the relationship between competitive pressure and corporate risk-taking behaviours amongst firms of different sizes.

We find that firm sizes are positively associated with their risk-taking behaviours when firms respond to competitive pressure. Large firms are inclined to exhibit a high level of risk-taking behaviours, whereas small firms tend to make conservative decisions. Regional growth potential and institutional ownership moderate the relationships.

Utilising text mining techniques, this study constructs a novel quantitative indicator to measure competitive pressure perceived by focal firms and demonstrates the heterogeneous behaviour of firms of different sizes in response to competitive pressure from peers, advancing research on competitive market pressures.

How organisations interact with and respond to environmental pressures has been a long-term interest of organisational scholars. Still, it remains an under-theorised phenomenon from a project perspective. So far, there is limited understanding of how projects, which are composed by a constellation of organisations, “respond” to institutional pressures that are exerted on them. This research takes the perspective of projects as adopters/implementers of institutional pressures and analyses how they interact with, and respond to, such pressures. More specifically, this research explores how construction projects respond to the pressure of a Building Information Modelling (BIM) mandate.

Multiple in-depth case studies were conducted to explore the practical implementation of a BIM mandate in the UK and understand how the construction projects responded to the coercive pressures to implement a new policy mandate for process digitalisation. Multiple sources were employed for data collection and the data were analysed inductively. The findings identify a hybrid response comprising four distinct ways that projects might respond to an institutional pressure.

We find that projects decouple both from the content and from the intended purpose of a policy, i.e. there are two variance of a policy-practice decoupling phenomenon in projects. The findings also reveal the underlying conditions leading to decoupling.

We advance decoupling literature so that it better applies to the temporary, distributed and interdependent work conducted via projects. Second, we define decoupling in projects as a provisional and fragmented process of wayfinding through heterogeneous institutional spaces, and discuss the potential policy-practice assemblages in projects, influenced by how, if and when project members' activities decouple from the many and often contradicting institutional pressures they face. Third, we discuss how the qualitatively different forms of decoupling that we identified in our work may act as part of a legitimation process in ambiguous situations whereby projects might share a resemblance of conformity with institutional pressures when they are de facto only partially conforming to them.

This study aims to minimize the pressure drop across wavy microchannels using secondary branches without compromising its capacity to transfer the heat. The impact of secondary flows on the pressure drop and heat transfer capabilities at different Reynolds numbers are investigated numerically for different wavy microchannels. Finally, different channels are evaluated using performance evaluation criteria to determine their effectiveness.

To investigate the flow and heat transfer capabilities in wavy microchannels having secondary branches, a 3D conjugate heat transfer model based on finite volume method is used. In conventional wavy microchannel, secondary branches are introduced at crest and trough locations. For the numerical simulation, a single symmetrical channel is used to minimize computational time and resources and the flow within the channels remains single-phase and laminar.

The findings indicate that the suggested secondary channels notably improve heat transfer and decrease pressure drop within the channels. At lower flow rates, the secondary channels demonstrate superior performance in terms of heat transfer. However, the performance declines as the flow rate increased. With the same amplitude and wavelength, the introduction of secondary channels reduces the pressure drop compared with conventional wavy channels. Due to the presence of secondary channels, the flow splits from the main channel, and part of the core flow gets diverted into the secondary channel as the flow takes the path of minimum resistance. Due to this flow split, the core velocity is reduced. An increase in flow area helps in reducing pressure drop.

Many complex and intricate microchannels are proposed by the researchers to augment heat dissipation. There are challenges in the fabrication of microchannels, such as surface finish and achieving the required dimensions. However, due to the recent developments in metal additive manufacturing and microfabrication techniques, the complex shapes proposed in this paper are feasible to fabricate.

Wavy channels are widely used in heat transfer and micro-fluidics applications. The proposed wavy microchannels with secondary channels are different when compared to conventional wavy channels and can be used practically to solve thermal challenges. They help achieve a lower pressure drop in wavy microchannels without compromising heat transfer performance.

This study aims to investigate the factors influencing the social responsibility performance of Belt and Road Initiative (BRI) megaprojects. Specifically, it examines the role of isomorphic pressures and the joint influence of perceived benefits and top management support on megaproject social responsibility performance (MSRP).

Drawing from institutional theory, social exchange theory, and top management literature, this study established a conceptual model featuring eleven hypotheses. Subsequently, a questionnaire survey was administered to collect data from 238 actively engaged participants in BRI megaprojects. Structural Equation Modelling was utilised to analyse the data.

The empirical findings indicate that mimetic and coercive pressures positively influence MSRP. Perceived benefits and top management support significantly enhance MSRP. Moreover, perceived benefits and top management support partially mediate the effects of coercive and mimetic pressures. However, when it comes to normative pressures, their impact on MSRP is solely channelled through the support of top management.

This study is one of the early endeavours to explore the factors influencing the social responsibility performance of BRI megaprojects. It sheds light on the interplay between external pressures and internal factors in shaping social responsibility efforts in these projects. These findings are of particular significance for BRI actors and stakeholders, offering guidance for enhancing social responsibility strategies within the context of BRI megaprojects.

Relying on institutional theory and Oliver’s (1991) strategic responses framework, the purpose of this paper is to investigate the different strategies adopted by Spanish public universities to respond to institutional pressures for sustainability reporting.

Data were collected from a variety of sources, such as a series of email-structured interviews with key personnel from universities, a qualitative analysis of sustainability reports and a consultation of the website of each Spanish public university.

The findings reveal that Spanish public universities have responded to institutional pressures for sustainability reporting by adopting acquiescence, compromise, avoidance and defiance strategies. The variety of strategic responses adopted by Spanish public universities suggests that these organizations have not fully adhered to institutional pressures.

The results of this paper would be useful for practitioners since it tries to demonstrate whether universities, which are facing increasing institutional pressures and demands from stakeholders, have been developing sustainability reporting practices.

Universities have a remarkable social impact that could be used to promote sustainability practices. This paper investigates how these organizations can contribute to sustainability reporting as they should reproduce social norms.

The sustainability reporting context is in a phase of change. This paper tries to contribute to the accounting research by analyzing the extent to which universities are engaged in sustainability reporting. Relying on these premises, Oliver’s (1991) framework might be an insightful theoretical perspective to examine the responses provided by universities to institutional pressures.

The study explores the relationship between the breadth of external pressures facing leaders of small and medium-sized enterprises (SMEs) and the entrepreneurial stance they adopt for their firm, that is, entrepreneurial orientation (EO).

Blending attention theory with EO literature, we argue that increasing breadth of external pressures will challenge leaders' attentions with implications for how they seek innovation, risk-taking and bold acts. We highlight an inflection point after which a negative relationship between the breadth of external pressure and EO will turn positive. We use data from a survey of 125 small-sized wineries in France to test this and capture a range of 15 external pressures on entrepreneurs.

The main tests and additional robustness tests provide support. It is the breadth of external pressures – as opposed to intensity of any one specific form of pressure – that plays a fundamental role in shaping leaders' adoption of EO in small enterprises over and above internal characteristics.

While the results may be context-dependent, they provide support for an attention-based view of entrepreneurial responses by leaders of SMEs under pressure.

SME leaders and entrepreneurs should be aware of how their attention is challenged by breadth of pressures from external sources, as this can influence the EO they adopt for their SME.

This nonlinear perspective on external pressures influencing the EO of small firms has not been taken in the EO literature to date, despite some recent work that considers only a small range of external pressures.