Search results

The purpose of this paper is to discuss the durability and flexibility characteristics of latex modified ferrocement in comparison with conventional ferrocement particularly when exposed to severe environmental conditions.

The research programme encompasses the laboratory investigation on the structural, the deformation behaviour and characteristic of latex modified ferrocement elements cured in air and salt‐water environments. The tests include determination of load and deflection characteristics, moments, crack widths, crack spacing, and the number of cracks when subjected to static flexure.

Test result indicates a significant improvement in reducing and bridging micro cracks, especially in the pre‐peak load region. Fracture toughness and deformability increased significantly. However, the post peak behaviour was quite similar to conventional ferrocement.

The results show that latex modification has improved the mechanical properties of cement mortars, particularly their flexural strength.

The localized strain softening behaviour of concrete has been modelled by two approaches: (i) the stiffness degrading model based on the total stress‐strain constitutive relationship, and (ii) the tangent softening model based on the incremental stress‐strain relationship. The models are implemented using a new softening initiation criterion proposed for application in multi‐dimensional finite element analysis. Parametric analyses on plain concrete beams, tested experimentally by other researchers, have been carried out to investigate the required numerical efforts, the mesh objectivity, and the energy dissipation characteristics of the structures. The stiffness degrading model is very stable even when applied with relatively coarse finite element meshes. However, the computational demand of this model is relatively high. The combination of a total stress‐strain constitutive relationship to compute the element responses, and an incremental relationship to formulate the stiffness matrix, appears to be computationally efficient and stable, provided that adequately refined finite element mesh is used to model the structure.

The purpose of this paper is to contribute to the solution of the fatigue damage problem of reinforced concrete frames in bending.

The problem of fatigue damage is formulated based on the rheological–dynamical analogy, including a scalar damage variable to address the reduction of stiffness in strain softening. The modal analysis is used by the finite element method for the determination of modal parameters and resonance stability of the selected frame cross-section. The objectivity of the presented method is verified by numerical examples, predicting the ductility in bending of the frame whose basic mechanical properties were obtained by non-destructive testing systems.

The modal analysis in the frame of the finite element method is suitable for the determination of modal parameters and resonance stability of the selected frame cross-section. It is recommended that the modulus of elasticity be determined by non-destructive methods, e.g. from the acoustic response.

The paper presents a novel method of solving the ductility in bending taking into account both the creep coefficient and the aging coefficient. The rheological-dynamical analogy (RDA) method uses the resonant method to find material properties. The characterization of the structural damping via the damping ratio is original and effective.

Presents a computational algorithm for the numerical integration of triaxial concrete plasticity formulations. The specific material formulation at hand is the so‐called extended leon model for concrete. It is based on the flow theory of plasticity which entails isotropic hardening as well as fracture energy‐based softening in addition to non‐associated plastic flow. The numerical algorithm resorts to implicit integration according to the backward Euler strategy that enforces plastic consistency according to the closes‐point‐projection method (generalized radial‐return strategy). Numerical simulations illustrate the overall performance of the proposed algorithm and the significant increase of the convergence rate when the algorithmic tangent is used in place of the continuum operator.

In this paper, we examine the influence of the third invariant in computational plasticity. For this purpose we consider the extended Leon model, an elasto‐plastic model for concrete materials which accounts for the difference of shear strength in triaxial compression and triaxial extension. Consequently, the deviatoric trace of the loading surface is no longer circular like in von Mises and Drucker‐Prager plasticity. In the limit it approaches the triangular shape of the Rankine condition of maximum direct stress. Thereby, elliptic functions describe the out‐of‐roundness of the circular trace in terms of C¹‐continuous functions of the Lode angle. The algorithmic aspects of the third invariant considerably complicate the computational implementation since the radial return method of J₂‐plasticity does no longer maintain normality leading to loss of deviatoric associativity. The paper will focus on the computational issues near the three regions with high curvature at the compressive meridians with special attention on the lack of convergence of the plastic return algorithm and its slow rate of convergence in these regions. The algorithmic discussion at the constitutive level will be augmented by the axial plane‐strain compression test in order to illustrate the effect of the third invariant at the structural level of finite element analysis.

The purpose of this paper is to present a new bond slip model for reinforced concrete structures. It consists in an interface element (3D) which represents the interface between concrete (modeled in 3D) and steel, modeled using 1D truss elements.

The formulation of the interface element is presented and verified through a comparison with an analytical solution on an academic case. Finally, the model is compared with experimental results on a reinforced concrete tie.

Contrary to the classical perfect or “no-slip” relation which supposes the same displacement between steel and concrete, the proposed model is able to reproduce both global (force-displacement curve) and local (crack openings) results.

The proposed approach, applicable to large-scale computations, represents a valuable alternative to the no-slip relation hypothesis to correctly capture the crack properties of reinforced concrete structures.

Purpose – The aim of this work is to provide a global 3D finite element (FE) model devoted to the modelling of superficial soil ploughing in the large deformation range and for a vast class of soil treatment tools. Design/methodology/approach – We introduced soil constitutive equation in a FE software initially designed for the metal forming. We performed the numerical integration of the non‐linear ploughing problem. Non‐linearities encountered by the problem can be summed up: as soil constitutive equation (idealized with non‐associated compressible plastic law), unilateral frictional contact conditions (with a rigid body), geometrical non‐linearities (the ploughing tool) and large deformation range. To handle such difficulties we performed several numerical methods as implicit temporal scheme, Newton‐Raphson, non‐symmetric iterative solver, as well as proper approximation on stress and strain measures. Findings – Main results deal with the validation of the integration of the non‐linear constitutive equation in the code and a parametric study of the ploughing process. The influence of tool geometric parameters on the soil deformation modes and on the force experienced on the tools had been point out. As well, the influence of soil characteristics as compressibility had been analyzed. Research limitations/implications – This research is devoted to perform a numerical model applicable for a large range of soil treatment tools and for a large class of soil. However, taking into account all kind of soil is utopist. So limitations met are essentially related to the limit of the accuracy of the elasto‐plastic idealization for the soil. Practical implications – In practice the numerical model exposed in the paper can clearly help to improve and optimize any process involving superficial soil submitted to the mechanical action of a rigid body. Originality/value – The original value of the paper is to provide a global and an applicable numerical model able to take into account the main topics related to the ploughing of superficial soils. Industrials in geotechnics, in agriculture or in military purposes can benefit in using such numerical model.

The purpose of this paper is to describe various aspects of the visco-elastoplastic (VEP) behavior of porous-hardened concrete samples in relation to standard tests.

The problem is formulated on the basis of the rheological-dynamic analogy (RDA). In this study, changes in creep coefficient, Poisson's ratio, damage variables, modulus of elasticity, strength and angle of internal friction as a function of porosity are defined by P and S wave velocities. The RDA model provides a description of the degradation process of material properties from their peak state to their ultimate values using void volume fraction (VVF).

Compared to numerous versions of acoustic emission tracking developed to analyze the behavior of total wave propagation in inhomogeneous media with density variations, the proposed model is comprehensive in interpretation and consistent with physical understanding. The comparison of the damage variables with the theoretical variables under the assumption of spherical voids in the spherical representative volume element (RVE) shows a satisfactory agreement of the results for all analyzed samples if the maximum porosities are used for comparison.

The paper presents a new mathematical-physical method for examining the effect of porosity on the characteristics of hardened concrete. Porosity is essentially related to density variations. Therefore, it was logical to define the limit values of porosity using the strain energy density.

This study aims to develop a new analysis approach devised by incorporating a gradient-enhanced microplane damage model (GeMpDM) into isogeometric analysis (IGA), which shows computational stability and capability in accurately predicting crack propagations in structures with complex geometries.

For the non-local microplane damage modeling, the maximum modified von-Mises equivalent strain among all microplanes is regularized as a representative quantity. This characterization implies that only one additional governing equation is considered, which improves computational efficiency dramatically. By combined use of GeMpDM and IGA, quasi-static and dynamic numerical analyses are conducted to demonstrate the capability in predicting crack paths of complex geometries in comparison to FEM and experimental results.

The implicit scheme with the adopted damage model shows favorable numerical stability and the numerical results exhibit appropriate convergence characteristics concerning the mesh size. The damage evolution is successfully controlled by a tension-compression damage factor. Thanks to the advanced geometric design capability of IGA, the details of crack patterns can be predicted reliably, which are somewhat difficult to be acquired by FEM. Additionally, the damage distribution obtained in the dynamic analysis is in close agreement with experimental results.

The paper originally incorporates GeMpDM into IGA. Especially, only one non-local variable is considered besides the displacement field, which improves the computational efficiency and favorable convergence characteristics within the IGA framework. Also, enjoying the geometric design ability of IGA, the proposed analysis method is capable of accurately predicting crack paths reflecting the complex geometries of target structures.

Billions of entrepreneurs at the Base of the Pyramid (BoP) operate as small-scale producers within multi-tiered supply chain networks. Unfortunately, a majority of these entrepreneurs are simply unable to derive sufficient value from the network and are vulnerable to disasters and poverty. The purpose of this paper is to develop a typology that examines dynamic and triadic power relationships in order to create value chains for BoP producers.

This paper builds upon the available literature and a relevant historical case study to develop a typology. The validity of the typology is ascertained by examining and comparing two current BoP silk weaver communities in India.

The typology captures essential environmental variables and relates them to mediated and non-mediated forms of power which, in turn, shape the value derived from the supply chain network.

The typology provides specific recommendations for BoP producers, such as the formation of cooperatives, engaging in political unionization and ensuring that their social networks expand beyond local communities.

The typology brings together structuration theory and power and provides a framework for understanding supply value. This typology is generalizable to dynamic multi-tiered supply chain networks.