Search results

Static inverters are very important for the emergency energy distribution system of aircraft and similar machines. At the same time, the electrical energy produced at high frequency for electrical devices is used to reduce the weight of the cables in the aircraft and spacecraft because of the skin effect. In the high-frequency system, a thinner cable cross-section is used, and a great weight reduction occurs in the aircraft. So, fuel economy, less and late wear of the materials (landing gear, etc.) can be obtained with decreasing weight. This paper aims to present the development of a functional multilevel inverter (FMLI) with fractional sinus pulse width modulation (FSPWM) and a reduced number of switches to provide high-frequency and quality electrical energy conversion.

After the production of FSPWM for FMLI with a reduced component, which, to the best of the authors’ knowledge, is presented for the first time in this study, is explained step by step, and eight operating states are given according to different FSPWMs operating the circuit. The designed inverter and modulation technique are compared by testing the conventional modular multilevel inverter on different loads.

According to application results, it is seen that there is a 50% reduction in cross-section from 100 Hz to 400 Hz with the skin effect. At 1000 Hz, there is a 90% cross-section reduction. The decrease can be in cable weights that may occur in aircraft from 10 kg to 100 kg according to different frequencies. It causes less harmonic distortion than conventional converters. This supports the safer operation of the system. Compared to the traditional system, the proposed system provides more amplitude in converting the source to alternating voltage and increases the efficiency.

FSPWM is developed for multilevel inverters with reduced components at the high frequency and cascaded switching studies in the power electronics of aircraft.

Although the proposed system has less current and power loss as mentioned in the previous sections, it contains fewer power elements than conventional inverters that are equivalent for different hardware levels. This not only reduces the cost of the system but also provides ease of maintenance. To reduce the cable load in aircraft and create more efficient working conditions, 400 Hz alternative voltage is used. The proposed system causes less losses and lower harmonic distortions than traditional systems. This will reduce possible malfunctions and contribute to aircraft reliability for passengers and cargo. As technology develops, it is revealed that the proposed inverter system will be more efficient than traditional inverters when devices operating at frequencies higher than 400 Hz are used. With the proposed inverter, safer operation will be ensured, while there will be less energy loss, less fuel consumption and less carbon emissions to the environment.

The proposed inverter structure shows that it can provide energy transmission for electrical devices in space and aircraft by using the skin effect. It also contains less power elements than the traditional inverters, which are equivalent for different levels of hardware.

This study aims to highlight that security and flexibilities remain the main points of contention in the cordiality business. This research points to planning a framework that empowers hotel users to get to the room using a mobile access key. Advancing secured facilities, mobile phone “Near Field Communication” (NFC) innovation as the entrance device by carrying out an application containing an imitated mobile key for explicit verification access is used.

The proposed system is evaluated by triangulation of experimental, numerical and rational evaluation using partial least square structural equation modeling (PLS-SEM) with Malaysian hotel guests and employees.

The discoveries with the hypothesis supported validated that the suggested solution can eliminate physical cards, boost protection and encourage a contactless ecosystem. Theoretical, management and societal contributions are discussed here.

This experiment comes with the constraints that it was conducted in only two hotels and does not fully reflect the choices of a wider range of travellers. Secondly, the cost of existing NFC smart locks is still relatively high, and along with the development of technology, the price will decrease when supply exceeds demand.

To promote high-security attributes, NFC technology as the access system by implementing an application containing an emulated smart key for specific authentication access is used. The host-card emulation enables cost-effectiveness profit and initiating a defence system in the pandemic era.

To promote high-security attributes, NFC technology is used as the access system by implementing an application containing an emulated smart key for specific authentication access. The host-card emulation enables cost-effectiveness profit and initiating a defence system in the pandemic era.

The novelty of this study comes from the use of commonly available smartphone NFC features that are yet to be applied in the tourism ecosystem. The research provokes the applied concept of mobile smartkeys.

While most West European nations were formed around pre-existing entities that could be called “countries” before the modern age, this was not the case in the Middle East. Some entities, like Egypt, did have a clear political and cultural identity before colonialism, others, like Algeria, did not. This chapter discusses the four states of the Maghreb: Morocco, Algeria, Tunisia and Libya, through the perspective of “country creation” going into and coming out of colonial rule. We can see here two “models” of fairly similar types of historical development, one showing a gradual process through a protectorate period to relatively stable modern nations, another through violent conquest and direct colonization ending in violent liberation and military and wealthy but fragile states. The article asks whether these models for the history of country creation and the presence or absence of pre-colonial identities can help explain the modern history and nature of these states in the Arab Spring and the years thereafter. Then, a more tentative attempt is made to apply these models to two countries of the Arab east, Syria and Iraq. While local variations ensure that no model can be transferred directly, it can show the importance of studying the historical factors that go into the transition from geographical region to a country with people that can form the basis of a nation.

This paper aims to concentrate on recent innovations in flexible wearable sensor technology tailored for monitoring vital signals within the contexts of wearable sensors and systems developed specifically for monitoring health and fitness metrics.

In recent decades, wearable sensors for monitoring vital signals in sports and health have advanced greatly. Vital signals include electrocardiogram, electroencephalogram, electromyography, inertial data, body motions, cardiac rate and bodily fluids like blood and sweating, making them a good choice for sensing devices.

This report reviewed reputable journal articles on wearable sensors for vital signal monitoring, focusing on multimode and integrated multi-dimensional capabilities like structure, accuracy and nature of the devices, which may offer a more versatile and comprehensive solution.

The paper provides essential information on the present obstacles and challenges in this domain and provide a glimpse into the future directions of wearable sensors for the detection of these crucial signals. Importantly, it is evident that the integration of modern fabricating techniques, stretchable electronic devices, the Internet of Things and the application of artificial intelligence algorithms has significantly improved the capacity to efficiently monitor and leverage these signals for human health monitoring, including disease prediction.

Selective laser sintering (SLS) is an essential technology in the field of additive manufacturing. However, SLS technology is limited by the traditional point-laser sintering method and has reached the bottleneck of efficiency improvement. This study aims to develop an image-shaped laser sintering (ISLS) system based on a digital micromirror device (DMD) to address this problem. The ISLS system uses an image-shaped laser light source with a size of 16 mm × 25.6 mm instead of the traditional SLS point-laser light source.

The ISLS system achieves large-area image-shaped sintering of polymer powder materials by moving the laser light source continuously in the x-direction and updating the sintering pattern synchronously, as well as by overlapping the splicing of adjacent sintering areas in the y-direction. A low-cost composite powder suitable for the ISLS system was prepared using polyether sulfone (PES), pinewood and carbon black (CB) powders as raw materials. Large-sized samples were fabricated using composite powder, and the microstructure, dimensional accuracy, geometric deviation, density, mechanical properties and feasible feature sizes were evaluated.

The experimental results demonstrate that the ISLS system is feasible and can print large-sized parts with good dimensional accuracy, acceptable geometric deviations, specific small-scale features and certain density and mechanical properties.

This study has achieved the transition from traditional point sintering mode to image-shaped surface sintering mode. It has provided a new approach to enhance the system performance of traditional SLS.

This chapter examines the connections between race and class divisions and examines how they shape racial inequities in the distribution of resources, power and privilege. Throughout history, racial identity has been a key factor in determining a person's position in modern capitalist societies. As such, issues of race and class have preoccupied sociologists and other scholars with diverse ideological orientations. This is highlighted in debates around the nexus of race and class in the production of racial structures, laws and institutions that legitimate and perpetuate the normalisation and centrality of whiteness. This chapter summarises some of the historical and ongoing debates, providing a synthesis of how race and class divisions continue to shape contemporary intergroup relations and social policy. It delves into racial capitalism and how race intersects with other social identities to determine socio-economic hierarchy in many western countries.

At the moment, in terms of both research and commercial products, smart shoe technology and applications seem not to attract the same magnitude of attention compared to smart garments and other smart wearables such as wrist watches and wrist bands. The purpose of this study is to fill this knowledge gap by discussing issues regarding smart shoe sensing technologies, smart shoe sensor placements, factors that affect sensor placements and finally the areas of smart shoe applications.

Through a review of relevant literature, this study first and foremost attempts to explain what constitutes a smart shoe and subsequently discusses the current trends in smart shoe applications. Discussed in this study are relevant sensing technologies, sensor placement and areas of smart shoe applications.

This study outlined 13 important areas of smart shoe applications. It also uncovered that majority of smart shoe functionality are physical activity tracking, health rehabilitation and ambulation assistance for the blind. Also highlighted in this review are some of the bottlenecks of smart shoe development.

To the best of the authors’ knowledge, this is the first comprehensive review paper focused on smart shoe applications, and therefore serves as an apt reference for researchers within the field of smart footwear.

This paper explores how conflicting institutional logics shape the behaviors of macro- and micro-level actors in their use of a calculative practice. Thereby, this paper explains how quantification can undermine the intended purpose of a governance system based on a single number.

The study draws upon the literature on calculative practices and institutional logics to present the case of how a single number—specifically the conversion factor for Atlantic Cod, established by macro-level actors for the purposes of governance within the Norwegian fishing industry—is interpreted and used by micro-level actors in the industry. The study is based on documents, field observations and interviews with fishers, landing facilities, and control authorities.

The use of the conversion factor, while intended to protect fish stock and govern industry actions, does not always align with the institutional logics of micro-level actors. Especially during the winter season, these actors may seek to serve their interests, leading to potential system gaming. The reliance on a single number that overlooks seasonal nuances can motivate unintended behaviors, undermining the governance system’s intentions.

Integrating the literature on calculative practices with an institutional logics perspective, this study offers novel insights into the challenges of using quantification for the governance of complex industries. In particular, the paper reveals that when the logics of macro- and micro-level actors conflict in a single-number governance system, unintended outcomes arise due to a domination of the macro-level logics.

This paper presents a new and well-structured framework that aims to assess the current environmental impact from a Greenhouse Gas (GHG) emissions perspective. This tool includes a new set of Lean Key Performance Indicators (KPIs), which translates the well-known logic of Overall Equipment Effectiveness in the field of GHG emissions, that can progressively detect industrial losses that cause GHG emissions and support decision-making for implementing improvements.

The new metrics are presented with reference to two different perspectives: (1) to highlight the deviation of the current value of emissions from the target; (2) to adopt a diagnostic orientation not only to provide an assessment of current performance but also to search for the main causes of inefficiencies and to direct improvement implementations.

The proposed framework was applied to a major company operating in the plywood production sector. It identified emission-related losses at each stage of the production process, providing an overall performance evaluation of 53.1%. The industrial application shows how the indicators work in practice, and the framework as a whole, to assess GHG emissions related to industrial losses and to proper address improvement actions.

This paper scrutinizes a new set of Lean KPIs to assess the industrial losses causing GHG emissions and identifies some significant drawbacks. Then it proposes a new structure of losses and KPIs that not only quantify efficiency but also allow to identify viable countermeasures.

This chapter examines the concepts of race and racism, critically reviewing their historical and contemporary applications in everyday life as well as in academic and policy debates. Racism has been extensively researched, with various theories and conceptualisations developed across social science. However, there is a great deal of disagreement regarding its nature, contemporary significance and empirical validation. This chapter examines these and attempts to synthesise some of the common definitions of racism provided in the literature. It explores related concepts and underlying themes pertaining to expressions of race and racism. Furthermore, it unpacks current knowledge about racial issues and discusses recent advances in the conceptual understanding of various forms of racism. It also elucidates the social, political and analytical applications of racism as a concept and the significance of racism in contemporary societies. The chapter concludes by highlighting how racism is a dynamic phenomenon, continuously evolving with the social, political and technological transformations in contemporary societies.