Search results

This study aims to offer a hybrid stand-alone system for electric vehicle (EV) charging stations (CS), an emerging power scheme due to the availability of renewable and environment-friendly energy sources. This paper presents the analysis of a photovoltaic (PV) with an adaptive neuro-fuzzy inference system (ANFIS) algorithm, solid oxide fuel cell (SOFC) and a battery storage scheme incorporated for EV CS in a stand-alone mode. In previous studies, either the hydrogen fuel of SOFC or the irradiance is controlled using artificial neural network. These parameters are not controlled simultaneously using an ANFIS-based approach. The ANFIS-based stand-alone hybrid system controlling both the fuel flow of SOFC and the irradiance of PV is discussed in this paper.

The ANFIS algorithm provides an efficient estimation of maximum power (MP) to the nonlinear voltage–current characteristics of a PV, integrated with a direct current–direct current (DC–DC) converter to boost output voltage up to 400 V. The issue of fuel starvation in SOFC due to load transients is also mitigated using an ANFIS-based fuel flow regulator, which robustly provides fuel, i.e. hydrogen per necessity. Furthermore, to ensure uninterrupted power to the CS, PV is integrated with a SOFC array, and a battery storage bank is used as a backup in the current scenario. A power management system efficiently shares power among the aforesaid sources.

A comprehensive simulation test bed for a stand-alone power system (PV cells and SOFC) is developed in MATLAB/Simulink. The adaptability and robustness of the proposed control paradigm are investigated through simulation results in a stand-alone hybrid power system test bed.

The simulation results confirm the effectiveness of the ANFIS algorithm in a stand-alone hybrid power system scheme.

The ongoing paradigm shift in the energy sector holds paramount implications for the realization of the sustainable development goals, encompassing critical domains such as resource optimization, environmental stewardship and workforce opportunities. Concurrently, this transformative trajectory within the power sector possesses a dual-edged nature; it may ameliorate certain challenges while accentuating others. In light of the burgeoning research stream on open innovation, this study aims to examine the intricate dynamics of knowledge-based industry-university-research networking, with an overarching objective to elucidate and calibrate the equilibrium of ambidextrous innovation within power systems.

The authors scrutinize the role of different innovation organizations in three innovation models: ambidextrous, exploitative and exploratory, and use a multiobjective decision analysis method-entropy weight TOPSIS. The research was conducted within the sphere of the power industry, and the authors mined data from the widely used PatSnap database.

Results show that the breadth of knowledge search and the strength of an organization’s direct relationships are crucial for ambidextrous innovation, with research institutions having the highest impact. In contrast, for exploitative innovation, depth of knowledge search, the number of R&D patents and the number of innovative products are paramount, with universities playing the most significant role. For exploratory innovation, the depth of knowledge search and the quality of two-mode network relations are vital, with research institutions yielding the best effect. Regional analysis reveals Beijing as the primary hub for ambidextrous and exploratory innovation organizations, while Jiangsu leads for exploitative innovation.

The study offers valuable implications to cope with the dynamic state of ambidextrous innovation performance of the entire power system. In light of the findings, the dynamic state of ambidextrous innovation performance within the power system can be adeptly managed. By emphasizing a balance between exploratory and exploitative strategies, stakeholders are better positioned to respond to evolving challenges and opportunities. Thus, the study offers pivotal guidance to ensure sustained adaptability and growth in the power sector’s innovation landscape.

The primary originality is to extend and refine the theoretical understanding of ambidextrous innovation within power systems. By integrating several theoretical frameworks, including social network theory, knowledge-based theory and resource-based theory, the authors enrich the theoretical landscape of power system ambidextrous innovation. Also, this inclusive examination of two-mode network structures, including the interplay between knowledge and cooperation networks, unveils the intricate interdependencies between these networks and the ambidextrous innovation of power systems. This approach significantly widens the theoretical parameters of innovation network research.

The purpose of this paper is to track the maximal power of wind energy conversion system (WECS) and enhance the search capability for WECS maximum power point tracking (MPPT).

The hybrid technique is the combination of tunicate swarm algorithm (TSA) and radial basis function neural network.

TSA gets input parameters from the rectifier outputs such as rectifier direct current (DC) voltage, DC current and time. From the input parameters, it enhances the reduced fault power of rectifier and generates training data set based on the MPPT conditions. The training data set is used in radial basis function. During the execution time, it produces the rectifier reference DC side voltage that is converted to control pulses of inverter switches.

Finally, the proposed method is executed in MATLAB/Simulink site, and the performance is compared with different existing methods like particle swarm optimization algorithm and hill climb searching technique. Then the output illustrates the performance of the proposed method and confirms its capability to solve issues.

The purpose of this study is to provide the enhancement of power quality of a high power-rated voltage source inverter driven induction motor with a three-phase, three-level neutral point clamped converter placed at the front end, while a passive power filter is connected in shunt with it. The improvement in power quality can be achieved by reducing the total harmonic distortion in source current. The controllers were designed for the linearization of the high-power induction motor drive. A control method is presented for the regulation of the common DC-link voltage.

The induction motor is modeled using its dynamic equations, and a decoupling controller is designed to linearize the nonlinear dynamics of the drive through feedback. The common DC-link voltage of the proposed front-end connected converter is monitored and controlled through a control method which feeds the pulse width modulated inverter that drives the induction motor. A passive power filter is designed to meet the reactive power requirement of the system in addition to improve the power quality.

Simulations were carried out for the proposed topology of the drive mechanism, and the outcomes were analyzed by a comparative analysis of the drive system both in the presence of the passive filter as well as in the absence of the filter. The total harmonic distortion is found to be reduced enough to meet the standards with the designed filter, and the reactive power is also compensated considerably. The input power factor at the supply side is maintained almost to unity, and the DC-link voltage of the proposed circuit topology is maintained at the desired level. The overall performance of the drive system was found to be useful and economical.

A new topology of a front-end connected three-level neutral point clamped converter to a high power-rated induction motor drive is proposed. The drive is fed by a pulse width modulated inverter with a common DC-link with the front end connected converter. A passive filter is designed with respect to the reactive power requirement of the system and connected in shunt to the converter at the supply side. Control schemes are designed and used for the drive system and also for the regulation of the common DC-link voltage of the proposed front end connected converter.

This study aims to investigate the feasibility of proposed microgrid (MG) that comprises photovoltaic, wind turbines, battery energy storage and diesel generator to supply a residential building in Grindelwald which is chosen as the test location.

Three operational configurations were used to run the proposed MG. In the first configuration, the electric energy can be vended and procured utterly between the main-grid and MG. In the second configuration, the energy trade was performed within 15 kWh as the maximum allowable limit of energy to purchase and sell. In the third configuration, the system performance in the stand-alone operation mode was investigated. A whale optimization technique is used to determine the optimal size of MG in all proposed configurations. The cost of energy (COE) and other measures are used to evaluate the system performance.

The obtained results revealed that the first configuration is the most beneficial with COE of 0.253$/KWh and reliable 100%. Furthermore, the whale optimization algorithm is sufficiently feasible as compared to other techniques to apply in the applications of MG.

The value of the proposed research is to investigate to what extend the integration between MG and main-grid is beneficial economically and technically. As opposed to previous research studies that have focused predominantly only on the optimal size of MG.

The paper covers the topic of power strategies between actors and the interplay between the service ecosystem and the actor(s), and vice versa. The paper addresses the lack of conceptual development concerning power considerations beyond dyadic, rigid and role-based models found in general marketing literature. Further, the paper opens the area of power relationships, using the service ecosystem as conceptual framework.

The paper has a systemic and sociological view on service-ecosystems using mainly Giddens' structuration theory. Service-dominant logic literature from 2004 to 2021 is systematically reviewed for power issues and qualitatively analyzed. Mayring's step model of, firstly, inductive and, secondly, deductive category development is applied. Subcategories were identified, subsumed and finally grouped into five categories to increase the level of abstraction.

The article investigates power considerations and enables marketers to create power through (1) imbalance, to find strategies and counterstrategies for (2) actor's behavior, to understand the (3) actor's embeddedness within a service ecosystem and its dynamic nature, to learn about (4) institutions and actor's institutional work. A set of seven propositions is presented for the conceptualization of power strategies in a service ecosystem.

The consideration of power on different levels supports both the zooming-in and zooming-out to observe and understand the power phenomena in a service ecosystem. Seven propositions about episodic as well as systemic power relations are presented. Power is conceptualized in service ecosystem as transformative capability of an actor to intervene on institutions and in some way alter them, recognizing that power relations are co-created, dynamic and context-dependent.

The article recognizes different levels (micro-meso-macro) of power considerations and helps practitioners and marketers to create power through (1) imbalance, find strategies and counterstrategies for (2) actor's behavior, understand the (3) actor's embeddedness within a service ecosystem and its dynamic nature, learn about (4) institutions and actor's institutional work. This enables managers to find an appropriate choice of action in their specific context to transform the service ecosystem(s) they are embedded in.

As all social systems are power systems, a service ecosystem can only be fully understood by integrating the elementary concept of power. As such, power considerations within actor strategies and the service ecosystem are relevant to improve the understanding of transformation of the service ecosystem. Power, in the sense of the transformative capability of actors, changes the social and material world.

Power issues are important to understand the “hows” of resource integration in service ecosystems and its transformation or stability.

This paper aims to propose, the multi-objective method for optimal planning and operation of distributed generators (DGs) on distribution system (DS) using hybrid technique is proposed.

The proposed hybrid technique denotes hybrid wrapper of black widow optimization algorithm (BWOA) and bear smell search algorithm (BSSA). BWOA accelerates the convergence speed with combination of the search strategy of BSSA; hence, it is named as improved black widow-bear smell search algorithm (IBWBSA) technique.

The multiple-objective operation denotes reducing generation cost, power loss, voltage deviation with optimally planning and operating the DS. For setting up the DG units on DS, IBWBSA technique is equipped to simultaneously reconfigure and find the optimal areas.

In this planning model, the constraints are power balance, obvious power flow limit, bus voltage, distribution substation’s capacity and cost. Then, proposed multiple-objective hybrid method to plan electrical distribution scheme is executed in the MATLAB/Simulink work site.

This study aims to investigate the daily performance of the proposed microgrid (MG) that comprises photovoltaic, wind turbines and is connected to the main grid. The load demand is a residential area that includes 20 houses.

The daily operational strategy of the proposed MG allows to vend and procure utterly between the main grid and MG. The smart metre of every consumer provides the supplier with the daily consumption pattern which is amended by demand side management (DSM). The daily operational cost (DOC) CO2 emission and other measures are utilized to evaluate the system performance. A grey wolf optimizer was employed to minimize DOC including the cost of procuring energy from the main grid, the emission cost and the revenue of sold energy to the main grid.

The obtained results of winter and summer days revealed that DSM significantly improved the system performance from the economic and environmental perspectives. With DSM, DOC on winter day was −26.93 ($/kWh) and on summer day, DOC was 10.59 ($/kWh). While without considering DSM, DOC on winter day was −25.42 ($/kWh) and on summer day DOC was 14.95 ($/kWh).

As opposed to previous research that predominantly addressed the long-term operation, the value of the proposed research is to investigate the short-term operation (24-hour) of MG that copes with vital contingencies associated with selling and procuring energy with the main grid considering the environmental cost. Outstandingly, the proposed research engaged the consumers by smart meters to apply demand-sideDSM, while the previous studies largely focused on supply side management.

This study aims to solve optimal pricing and power bidding strategy problem for integrated combined heat and power (CHP) system by using a modified heuristic optimization algorithm.

In electricity markets, generation companies compete according to their bidding parameters; therefore, optimal pricing and bidding strategy are solved. Recently, CHP units are significantly operated by generation companies to meet power and heat, simultaneously.

For validation, it is shown that profit is improved by 0.04%–48.02% for single and 0.02%–31.30% for double-sided auctions. As heat price curve is extracted, the simulation results show that when CHP system is integrated with other units results in profit increase and emission decrease by 3.04%–3.18% and 2.23%–4.13%, respectively. Also, CHP units significantly affect bidding parameters.

The novelties are pricing and bidding strategy of integrated CHP system is solved; local heat selling is considered in pricing and bidding strategy problem and heat price curve is extracted; the effects of CHP utilization on bidding parameters are investigated; a modified heuristic and deterministic optimization algorithm is presented.

The demand for electricity supply increases day by day due to the rapid growth in the number of industries and consumer devices. The electric power supply needs to be improved by properly arranging distributed generators (DGs). The purpose of this paper is to develop a methodology for optimum placement of DGs using novel algorithms that leads to loss minimization.

In this paper, a novel hybrid optimization is proposed to minimize the losses and improve the voltage profile. The hybridization of the optimization is done through the crow search (CS) algorithm and the black widow (BW) algorithm. The CS algorithm is used for finding some tie-line systems, DG locations, and the BW algorithm is used for finding the rest of the tie-line switches, DG sizes, unlike in usual hybrid optimization techniques.

The proposed technique is tested on two large-scale radial distribution networks (RDNs), like the 119-bus radial distribution system (RDS) and the 135 RDS, and compared with normal hybrid algorithms.

The main novelty of this hybridization is that it shares the parameters of the objective function. The losses of the RDN can be minimized by reconfiguration and incorporating compensating devices like DGs.