Search results

In the vast majority of published papers, the optimal reactive power dispatch (ORPD) problem is dealt as a single-objective optimization; however, optimization with a single objective is insufficient to achieve better operation performance of power systems. Multi-objective ORPD (MOORPD) aims to minimize simultaneously either the active power losses and voltage stability index, or the active power losses and the voltage deviation. The purpose of this paper is to propose multi-objective ant lion optimization (MOALO) algorithm to solve multi-objective ORPD problem considering large-scale power system in an effort to achieve a good performance with stable and secure operation of electric power systems.

A MOALO algorithm is presented and applied to solve the MOORPD problem. Fuzzy set theory was implemented to identify the best compromise solution from the set of the non-dominated solutions. A comparison with enhanced version of multi-objective particle swarm optimization (MOEPSO) algorithm and original (MOPSO) algorithm confirms the solutions. An in-depth analysis on the findings was conducted and the feasibility of solutions were fully verified and discussed.

Three test systems – the IEEE 30-bus, IEEE 57-bus and large-scale IEEE 300-bus – were used to examine the efficiency of the proposed algorithm. The findings obtained amply confirmed the superiority of the proposed approach over the multi-objective enhanced PSO and basic version of MOPSO. In addition to that, the algorithm is benefitted from good distributions of the non-dominated solutions and also guarantees the feasibility of solutions.

The proposed algorithm is applied to solve three versions of ORPD problem, active power losses, voltage deviation and voltage stability index, considering large -scale power system IEEE 300 bus.

The efficiency of the emission trading system (ETS) may help to control the total emission amount. The purpose of this paper is to investigate the generating cost issue in environmental/economic power dispatch, under the premise that the ETS has already been established.

The emission benefit and price level factors are introduced for transforming the bi‐objective optimization problem with the fuel cost and emission cost minimization into a single objective. In the developed mathematical model, both the total emission amount from all units and the permitted emission amount from each generating unit are taken into account. The successive linear programming method is employed to solve the optimization problem.

Simulation results of the IEEE 30‐bus test system show that a proper trading mechanism of emission permits is very important for generation companies to control the total emission amount and to reduce the overall generation cost.

Further research is needed to find out the impact on the generating cost caused by trading price fluctuation and the coping strategies.

The results can help to meet the requirements of current generating optimal dispatch.

The purpose of this paper is to solve economic emission dispatch problem in connection of wind with hydro-thermal units.

The proposed hybrid methodology is the joined execution of both the modified salp swarm optimization algorithm (MSSA) with artificial intelligence technique aided with particle swarm optimization (PSO) technique.

The proposed approach is introduced to figure out the optimal power generated power from the thermal, wind farms and hydro units by minimizing the emission level and cost of generation simultaneously. The best compromise solution of the generation power outputs and related gas emission are subject to the equality and inequality constraints of the system. Here, MSSA is used to generate the optimal combination of thermal generator with the objective of minimum fuel and emission objective function. The proposed method also considers wind speed probability factor via PSO-artificial neural network (ANN) technique and hydro power generation at peak load demand condition to ensure economic utilization.

To validate the advantage of the proposed approach, six- and ten-units thermal systems are studied with fuel and emission cost. For minimizing the fuel and emission cost of the thermal system with the predicted wind speed factor, the proposed approach is used. The proposed approach is actualized in MATLAB/Simulink, and the results are examined with considering generation units and compared with various solution techniques. The comparison reveals the closeness of the proposed approach and proclaims its capability for handling multi-objective optimization problems of power systems.

This paper aims to propose, the multi-objective method for optimal planning and operation of distributed generators (DGs) on distribution system (DS) using hybrid technique is proposed.

The proposed hybrid technique denotes hybrid wrapper of black widow optimization algorithm (BWOA) and bear smell search algorithm (BSSA). BWOA accelerates the convergence speed with combination of the search strategy of BSSA; hence, it is named as improved black widow-bear smell search algorithm (IBWBSA) technique.

The multiple-objective operation denotes reducing generation cost, power loss, voltage deviation with optimally planning and operating the DS. For setting up the DG units on DS, IBWBSA technique is equipped to simultaneously reconfigure and find the optimal areas.

In this planning model, the constraints are power balance, obvious power flow limit, bus voltage, distribution substation’s capacity and cost. Then, proposed multiple-objective hybrid method to plan electrical distribution scheme is executed in the MATLAB/Simulink work site.

The purpose of this paper is to present a new system frequency response model with participation of wind-hydro-thermal units to overcome frequency deviations.

The extracted minimum frequency equation is considered as a constraint in security-constrained unit commitment calculations. Because of high-order polynomials in the frequency transfer function and high degree of nonlinearity of minimum frequency constraint, Routh stability criterion method and piecewise linearization technique are used to reduce system order and linearize the system frequency response model, respectively.

The results of this paper indicate that by using this model, the hourly minimum frequency is improved and is kept within defined range.

This combined model can be used to evaluate the frequency of the power system following unexpected load increase or generation disturbances. It also can be used to investigate the system frequency performance and ensure power system security which are caused by peak load or loss of generation in presence of renewable energies.

The purpose of this study is to address the efficiency of power losses representation while still reducing the computational burden of an optimal power flow (OPF) model in transmission expansion planning (TEP) studies.

A modified TEP model is formulated with inclusions of linearized approximation of power losses for a large-scale power system with renewable energy sources. The multi-objectives function determines the effect of transmission line losses on the optimal power generation dispatch in the power system with and without inclusion of renewable energy sources with emphasis on minimizing the investment and operation costs, emission and the power losses.

This study investigates the impact of renewable energy sources on system operating characteristics such as transmission power losses and voltage profile. Sensitivity analysis of the performance for the developed deterministic quadratic programming models was analyzed based on optimal generated power and losses on the system.

In the future, a comparison of the alternating current OPF and direct current (DC) OPF models based on the proposed mathematical formulations can be carried out to determine the efficiency and reduction of computation process of the two models.

This paper proposed an accurate way of computing transmission losses in DC OPF for a TEP context with a view of achieving a minimal computation time.

This paper addresses the following objectives: develop a modified DC OPF with a linearized approximation of power losses in TEP problem with large integration of RES. Investigate the impact of RES on system operating characteristics such as transmission power losses and voltage profile.

With the advent of the information age, this paper aims to apply risk analysis theories to study the risk prevention mechanism of information disclosure, thus supporting the green electricity supply.

This paper conducts a comprehensive evaluation and analysis of the impact of power market transactions, power market operations and effective government supervision, so as to figure out the core risk content of power market information disclosure. Moreover, AHP-entropy method is adopted to weigh different indicators of information disclosure risks for the participants in the electricity market.

The potential reasons for information disclosure risk in the electricity market include insufficient information disclosure, high cost of obtaining information, inaccurate information disclosure, untimely information disclosure and unfairness of information disclosure.

Some suggestions and implications on risk prevention mechanism of information disclosure in the electricity market are provided, so as to ensure the green electricity supply and promote the electricity market reform in China.

For one thing, despite the fact that it is popular to research the minimization of the power losses in power systems, the optimization of single objective seems insufficient to fully improve the performance of power systems. Multi-objective VAR Dispatch (MVARD) generally minimizes two objectives simultaneously: power losses and voltage deviation. The purpose of this paper is to propose Multi-Objective Enhanced PSO (MOEPSO) algorithm that achieves a good performance when applied to solve MVARD problem. Thus, the new algorithm is worthwhile to be known by the public.

Motivated by differential evolution algorithm, cross-over operator is introduced to increase particle diversity and reinforce global searching capacity in conventional PSO. In addition to that, a constraint-handling approach considering Constrain-prior Pareto-Dominance (CPD) is presented to handle the inequality constraints on dependent variables. Constrain-prior Nondominated Sorting (CNS) and crowding distance methods are considered to maintain well-distributed Pareto optimal solutions. The method combining CPD approach, CNS technique, and cross-over operator is called the MOEPSO method.

The IEEE 30 node and IEEE 57 node on power systems have been used to examine and test the presented method. The simulation results show the MOEPSO method can achieve lower power losses, smaller voltage deviation, and better-distributed Pareto optimal solutions comparing with the Multi-Objective PSO approach.

The most original parts include: the presented MOEPSO algorithm, the CPD approach that is used to handle constraints on dependent variables, and the CNS method which is considered to maintain a well-distributed Pareto optimal solutions. The performance of the proposed algorithm successfully reflects the value of this paper.

Microgrids are inclined to use renewable energy resources within the availability limits. In conventional studies, energy interchange among microgrids was not considered because of one-directional power flows. Hence, this paper aims to study the optimal day-ahead energy scheduling of a centralized networked multi-carrier microgrid (NMCMG). The energy scheduling faces new challenges by inclusion of responsive loads, integration of renewable sources (wind and solar) and interaction of multi-carrier microgrids (MCMGs).

The optimization model is formulated as a mixed integer nonlinear programing and is solved using GAMS software. Numerical simulations are performed on a system with three MCMGs, including combined heat and power, photovoltaic arrays, wind turbines and energy storages to fulfill the required electrical and thermal load demands. In the proposed system, the MCMGs are in grid-connected mode to exchange power when required.

The proposed model is capable of minimizing the system costs by using a novel demand side management model and integrating the multiple-energy infrastructure, as well as handling the energy management of the network. Furthermore, the novel demand side management model gives more accurate optimal results. The operational performance and total cost of the NMCMG in simultaneous operation of multiple carriers has been effectively improved.

Introduction and modeling of the multiple energy demands within the MCMG. A novel time- and incentive-based demand side management, characterized by shifting techniques, is applied to reshape the load curve, as well as for preventing the excessive use of energy in peak hours. This paper analyzes the need to study how inclusion of multiple energy infrastructure integration and responsive load can impact the future distribution network costs.

The purpose of this study is to introduce the top-level design ideas and the overall architecture of earthquake early-warning system for high speed railways in China, which is based on P-wave earthquake early-warning and multiple ways of rapid treatment.

The paper describes the key technologies that are involved in the development of the system, such as P-wave identification and earthquake early-warning, multi-source seismic information fusion and earthquake emergency treatment technologies. The paper also presents the test results of the system, which show that it has complete functions and its major performance indicators meet the design requirements.

The study demonstrates that the high speed railways earthquake early-warning system serves as an important technical tool for high speed railways to cope with the threat of earthquake to the operation safety. The key technical indicators of the system have excellent performance: The first report time of the P-wave is less than three seconds. From the first arrival of P-wave to the beginning of train braking, the total delay of onboard emergency treatment is 3.63 seconds under 95% probability. The average total delay for power failures triggered by substations is 3.3 seconds.

The paper provides a valuable reference for the research and development of earthquake early-warning system for high speed railways in other countries and regions. It also contributes to the earthquake prevention and disaster reduction efforts.