Search results

The purpose of this study is to use visual and inertial sensors to achieve real-time location. How to provide an accurate location has become a popular research topic in the field of indoor navigation. Although the complementarity of vision and inertia has been widely applied in indoor navigation, many problems remain, such as inertial sensor deviation calibration, unsynchronized visual and inertial data acquisition and large amount of stored data.

First, this study demonstrates that the vanishing point (VP) evaluation function improves the precision of extraction, and the nearest ground corner point (NGCP) of the adjacent frame is estimated by pre-integrating the inertial sensor. The Sequential Similarity Detection Algorithm (SSDA) and Random Sample Consensus (RANSAC) algorithms are adopted to accurately match the adjacent NGCP in the estimated region of interest. Second, the model of visual pose is established by using the parameters of the camera itself, VP and NGCP. The model of inertial pose is established by pre-integrating. Third, location is calculated by fusing the model of vision and inertia.

In this paper, a novel method is proposed to fuse visual and inertial sensor to locate indoor environment. The authors describe the building of an embedded hardware platform to the best of their knowledge and compare the result with a mature method and POSAV310.

This paper proposes a VP evaluation function that is used to extract the most advantages in the intersection of a plurality of parallel lines. To improve the extraction speed of adjacent frame, the authors first proposed fusing the NGCP of the current frame and the calibrated pre-integration to estimate the NGCP of the next frame. The visual pose model was established using extinction VP and NGCP, calibration of inertial sensor. This theory offers the linear processing equation of gyroscope and accelerometer by the model of visual and inertial pose.

In this study, an indoor sensor information fusion positioning system of the quadrotor unmanned aerial vehicle (UAV) was investigated to solve the problem of unstable indoor flight positioning.

The presented system was built on Light Detection and Ranging (LiDAR), Inertial Measurement Unit (IMU) and LiDAR-Lite devices. Based on this, one can obtain the aircraft's current attitude and the position vector relative to the target and control the attitudes and positions of the UAV to reach the specified target positions. While building a UAV positioning model relative to the target for indoor positioning scenarios under limited Global Navigation Satellite Systems (GNSS), the system detects the environment through the NVIDIA Jetson TX2 (Transmit Data) peripheral sensor, obtains the current attitude and the position vector of the UAV, packs the data in the format and delivers it to the flight controller. Then the flight controller controls the UAV by calculating the posture to reach the specified target position.

The authors used two systems in the experiment. The first is the proposed UAV, and the other is the Vicon system, our reference system for comparison purposes. Vicon positioning error can be considered lower than 2 mm from low to high-speed experiments. After comparison, experimental results demonstrated that the system could fully meet the requirements (less than 50 mm) in real-time positioning of the indoor quadrotor UAV flight. It verifies the accuracy and robustness of the proposed method compared with that of Vicon and achieves the aim of a stable indoor flight preliminarily.

Vicon positioning error can be considered lower than 2 mm from low to high-speed experiments. After comparison, experimental results demonstrated that the system could fully meet the requirements (less than 50 mm) in real-time positioning of the indoor quadrotor UAV flight. It verifies the accuracy and robustness of the proposed method compared with that of Vicon and achieves the aim of a stable indoor flight preliminarily.

Estimating the pose – position and orientation – of a moving object such as a robot is a necessary task for many applications, e.g., robot navigation control, environment mapping, and medical applications such as robotic surgery. The purpose of this paper is to introduce a novel method to fuse the information from several available sensors in order to improve the estimated pose from any individual sensor and calculate a more accurate pose for the moving platform.

Pose estimation is usually done by collecting the data obtained from several sensors mounted on the object/platform and fusing the acquired information. Assuming that the robot is moving in a three-dimensional (3D) world, its location is completely defined by six degrees of freedom (6DOF): three angles and three position coordinates. Some 3D sensors, such as IMUs and cameras, have been widely used for 3D localization. Yet, there are other sensors, like 2D Light Detection And Ranging (LiDAR), which can give a very precise estimation in a 2D plane but they are not employed for 3D estimation since the sensor is unable to obtain the full 6DOF. However, in some applications there is a considerable amount of time in which the robot is almost moving on a plane during the time interval between two sensor readings; e.g., a ground vehicle moving on a flat surface or a drone flying at an almost constant altitude to collect visual data. In this paper a novel method using a “fuzzy inference system” is proposed that employs a 2D LiDAR in a 3D localization algorithm in order to improve the pose estimation accuracy.

The method determines the trajectory of the robot and the sensor reliability between two readings and based on this information defines the weight of the 2D sensor in the final fused pose by adjusting “extended Kalman filter” parameters. Simulation and real world experiments show that the pose estimation error can be significantly decreased using the proposed method.

To the best of the authors’ knowledge this is the first time that a 2D LiDAR has been employed to improve the 3D pose estimation in an unknown environment without any previous knowledge. Simulation and real world experiments show that the pose estimation error can be significantly decreased using the proposed method.

Nobody concerned with political economy can neglect the history of economic doctrines. Structural changes in the economy and society influence economic thinking and, conversely, innovative thought structures and attitudes have almost always forced economic institutions and modes of behaviour to adjust. We learn from the history of economic doctrines how a particular theory emerged and whether, and in which environment, it could take root. We can see how a school evolves out of a common methodological perception and similar techniques of analysis, and how it has to establish itself. The interaction between unresolved problems on the one hand, and the search for better solutions or explanations on the other, leads to a change in paradigma and to the formation of new lines of reasoning. As long as the real world is subject to progress and change scientific search for explanation must out of necessity continue.

Docking technology plays a crucial role in enabling long-duration operations of autonomous underwater vehicles (AUVs). Visual positioning solutions alone are susceptible to abnormal drift values due to the challenging underwater optical imaging environment. When an AUV approaches the docking station, the absolute positioning method fails if the AUV captures an insufficient number of tracers. This study aims to to provide a more stable absolute position visual positioning method for underwater terminal visual docking.

This paper presents a six-degree-of-freedom positioning method for AUV terminal visual docking, which uses lights and triangle codes. The authors use an extended Kalman filter to fuse the visual calculation results with inertial measurement unit data. Moreover, this paper proposes a triangle code recognition and positioning algorithm.

The authors conducted a simulation experiment to compare the underwater positioning performance of triangle codes, AprilTag and Aruco. The results demonstrate that the implemented triangular code reduces the running time by over 70% compared to the other two codes, and also exhibits a longer recognition distance in turbid environments. Subsequent experiments were carried out in Qingjiang Lake, Hubei Province, China, which further confirmed the effectiveness of the proposed positioning algorithm.

This fusion approach effectively mitigates abnormal drift errors stemming from visual positioning and cumulative errors resulting from inertial navigation. The authors also propose a triangle code recognition and positioning algorithm as a supplementary approach to overcome the limitations of tracer light positioning beacons.

This paper aims to propose a method to solve the problem of localization and mapping of a two-wheeled inverted pendulum (TWIP) robot on the ground using the Stereo–inertial measurement unit (IMU) system. This method reparametrizes the pose according to the motion characteristics of TWIP and considers the impact of uneven ground on vision and IMU, which is more adaptable to the real environment.

When TWIP moves, it is constrained by the ground and swings back and forth to maintain balance. Therefore, the authors parameterize the robot pose as SE(2) pose plus pitch according to the motion characteristics of TWIP. However, the authors do not omit disturbances in other directions but perform error modeling, which is integrated into the visual constraints and IMU pre-integration constraints as an error term. Finally, the authors analyze the influence of the error term on the vision and IMU constraints during the optimization process. Compared to traditional algorithms, the algorithm is simpler and better adapt to the real environment.

The results of indoor and outdoor experiments show that, for the TWIP robot, the method has better positioning accuracy and robustness compared with the state-of-the-art.

The algorithm in this paper is proposed for the localization and mapping of a TWIP robot. Different from the traditional positioning method on SE(3), this paper parameterizes the robot pose as SE(2) pose plus pitch according to the motion of TWIP and the motion disturbances in other directions are integrated into visual constraints and IMU pre-integration constraints as error terms, which simplifies the optimization parameters, better adapts to the real environment and improves the accuracy of positioning.

In the last four years, since Volume I of this Bibliography first appeared, there has been an explosion of literature in all the main functional areas of business. This wealth of material poses problems for the researcher in management studies — and, of course, for the librarian: uncovering what has been written in any one area is not an easy task. This volume aims to help the librarian and the researcher overcome some of the immediate problems of identification of material. It is an annotated bibliography of management, drawing on the wide variety of literature produced by MCB University Press. Over the last four years, MCB University Press has produced an extensive range of books and serial publications covering most of the established and many of the developing areas of management. This volume, in conjunction with Volume I, provides a guide to all the material published so far.

The purpose of this paper is to introduce the concept of Value Fusion to describe how value can emerge from the use of mobile, networked technology by consumers, firms, and entities such as non‐consumers, a firm's competitors, and others simultaneously.

The paper discusses the combination of characteristics of mobile devices that enable Value Fusion and discusses specific value and benefits to consumers and firms of being mobile and networked. Value Fusion is introduced and defined and set apart from related, other conceptualizations of value. Examples are provided of Value Fusion and the necessary conditions for Value Fusion to occur are discussed. Also discussed are the conditions under which the use of mobile, networked technology by consumers and firms may lead to Value Confusion instead of Value Fusion. Several research questions are proposed to further enhance the understanding and management of Value Fusion.

The combination of portable, personal, networked, textual/visual and converged characteristics of mobile devices enables firms and consumers to interact and communicate, produce and consume benefits, and create value in new ways that have not been captured by popular conceptualizations of value. These traditional conceptualizations include customer value, experiential value, customer lifetime value, and customer engagement value. Value Fusion is defined as value that can be achieved for the entire network of consumers and firms simultaneously, just by being on the mobile network. Value Fusion results from producers and consumers: individually or collectively; actively and passively; concurrently; interactively or in aggregation contributing to a mobile network; in real time; and just‐in‐time.

This paper synthesizes insights from the extant value literature that by and large has focused on either the customer's or the firm's perspective, but rarely blended the two.

This paper aims to investigate an autonomous obstacle-surmounting method based on a hybrid gait for the problem of crossing low-height obstacles autonomously by a six wheel-legged robot. The autonomy of obstacle-surmounting is reflected in obstacle recognition based on multi-frame point cloud fusion.

In this paper, first, for the problem that the lidar on the robot cannot scan the point cloud of low-height obstacles, the lidar is driven to rotate by a 2D turntable to obtain the point cloud of low-height obstacles under the robot. Tightly-coupled Lidar Inertial Odometry via Smoothing and Mapping algorithm, fast ground segmentation algorithm and Euclidean clustering algorithm are used to recognize the point cloud of low-height obstacles and obtain low-height obstacle in-formation. Then, combined with the structural characteristics of the robot, the obstacle-surmounting action planning is carried out for two types of obstacle scenes. A segmented approach is used for action planning. Gait units are designed to describe each segment of the action. A gait matrix is used to describe the overall action. The paper also analyzes the stability and surmounting capability of the robot’s key pose and determines the robot’s surmounting capability and the value scheme of the surmounting control variables.

The experimental verification is carried out on the robot laboratory platform (BIT-6NAZA). The obstacle recognition method can accurately detect low-height obstacles. The robot can maintain a smooth posture to cross low-height obstacles, which verifies the feasibility of the adaptive obstacle-surmounting method.

The study can provide the theory and engineering foundation for the environmental perception of the unmanned platform. It provides environmental information to support follow-up work, for example, on the planning of obstacles and obstacles.

This paper aims to evaluate four different simultaneous localization and mapping (SLAM) systems in the context of localization of multi-legged walking robots equipped with compact RGB-D sensors. This paper identifies problems related to in-motion data acquisition in a legged robot and evaluates the particular building blocks and concepts applied in contemporary SLAM systems against these problems. The SLAM systems are evaluated on two independent experimental set-ups, applying a well-established methodology and performance metrics.

Four feature-based SLAM architectures are evaluated with respect to their suitability for localization of multi-legged walking robots. The evaluation methodology is based on the computation of the absolute trajectory error (ATE) and relative pose error (RPE), which are performance metrics well-established in the robotics community. Four sequences of RGB-D frames acquired in two independent experiments using two different six-legged walking robots are used in the evaluation process.

The experiments revealed that the predominant problem characteristics of the legged robots as platforms for SLAM are the abrupt and unpredictable sensor motions, as well as oscillations and vibrations, which corrupt the images captured in-motion. The tested adaptive gait allowed the evaluated SLAM systems to reconstruct proper trajectories. The bundle adjustment-based SLAM systems produced best results, thanks to the use of a map, which enables to establish a large number of constraints for the estimated trajectory.

The evaluation was performed using indoor mockups of terrain. Experiments in more natural and challenging environments are envisioned as part of future research.

The lack of accurate self-localization methods is considered as one of the most important limitations of walking robots. Thus, the evaluation of the state-of-the-art SLAM methods on legged platforms may be useful for all researchers working on walking robots’ autonomy and their use in various applications, such as search, security, agriculture and mining.

The main contribution lies in the integration of the state-of-the-art SLAM methods on walking robots and their thorough experimental evaluation using a well-established methodology. Moreover, a SLAM system designed especially for RGB-D sensors and real-world applications is presented in details.