Search results

During the construction process of the China Railway Track System (CRTS) I type filling layer, the nonwoven fabric bags have been used as grouting templates for cement asphalt (CA) emulsified mortar. The porous structure of nonwoven fabrics endowed the templates with breathability and water permeability. The standard requires that the volume expansion rate of CA mortar must be controlled within 1%–3%, which can generate expansion pressure to ensure that the cavities under track slabs are filled fully. However, the expansion pressure caused some of the water to seep out from the periphery of the filling bag, and it would affect the actual mix proportion of CA mortar. The differences in physical and mechanical properties between the CA mortar under track slabs and the CA mortar formed in the laboratory were studied in this paper. The relevant results could provide important methods for the research of filling layer materials for CRTS I type and other types of ballastless tracks in China.

During the inspection of filling layer, the samples of CA mortar from different working conditions and raw materials were taken by uncovering the track slabs and drilling cores. The physical and mechanical properties of CA mortar under the filling layer of the slab were systematically analyzed by testing the electrical flux, compressive strength and density of mortar in different parts of the filling layer.

In this paper, the electric flux, the physical properties and mechanical properties of different parts of CA mortar under the track slab were investigated. The results showed that the density, electric flux and compressive strength of CA mortar were affected by the composition of raw materials for dry powders and different parts of the filling layer. In addition, the electrical flux of CA mortar gradually decreased within 90 days’ age. The electrical flux of samples with the thickness of 54 mm was lower than 500 C. Therefore, the impermeability and durability of CA mortar could be improved by increasing the thickness of filling layer. Besides, the results showed that the compressive strength of CA mortar increased, while the density and electric flux decreased gradually, with the prolongation of hardening time.

During 90 days' age, the electrical flux of the CA mortar gradually decreased with the increase of specimen thickness and the electrical flux of the specimens with the thickness of 54 mm was lower than 500 C. The impermeability and durability of the CA mortar could be improved by increasing the thickness of filling layer. The proposed method can provide reference for the further development and improvement of CRTS I and CRTS II type ballastless track in China.

Porous implant surface is shown to facilitate bone in-growth and cell attachment, improving overall osteointegration, while providing adequate mechanical integrity. Recently, biodegradable material possessing such superior properties has been the focus with an aim of revolutionizing implant’s design, material and performance. This paper aims to present a comprehensive investigation into the design and development of low elastic modulus porous biodegradable Mg-3Si-5HA composite by mechanical alloying and spark plasma sintering (MA-SPS) technique.

This paper presents a comprehensive investigation into the design and development of low elastic modulus porous biodegradable Mg-3Si-5HA composite by MA-SPS technique. As the key alloying elements, HA powders with an appropriate proportion weight 5 and 10 are mixed with the base elemental magnesium (Mg) particles to form the composites of potentially variable porosity and mechanical property. The aim is to investigate the performance of the synthesized composites of Mg-3Si together with HA in terms of mechanical integrity hardness and Young’s moduli corrosion resistance and in-vitro bioactivity.

Mechanical and surface characterization results indicate that alloying of Si leads to the formation of fine Mg2 Si eutectic dense structure, hence increasing hardness while reducing the ductility of the composite. On the other hand, the allying of HA in Mg-3Si matrix leads to the formation of structural porosity (5-13 per cent), thus resulting in low Young’s moduli. It is hypothesized that biocompatible phases formed within the composite enhanced the corrosion performance and bio-mechanical integrity of the composite. The degradation rate of Mg-3Si composite was reduced from 2.05 mm/year to 1.19 mm/year by the alloying of HA elements. Moreover, the fabricated composites showed an excellent bioactivity and offered a channel/interface to MG-63 cells for attachment, proliferation and differentiation.

Overall, the findings suggest that the Mg-3Si-HA composite fabricated by MA and plasma sintering may be considered as a potential biodegradable material for orthopedic application.

The coast at Berakas in the Brunei-Muara district of Brunei Darussalam suffers from erosion caused by a combination of fluvial and marine processes. This paper investigates the rate and pattern of erosion along a 1.8-km stretch of coast to compare the difference between the unprotected and protected sections. We used (i) image and spatial analysis and (ii) field geomorphology. The Digital Shoreline Analysis System (DSAS) in ArcGIS was used to compare the study area using two Google Earth images. The study found that the unprotected section had receded by 4.6 m between 2009 and 2019, while the protected section had advanced by 8.0 m over the same period; intense gullying and slumping of cliff continued at both sections. The detached headland breakwaters in the protected section were effective in stabilizing the coast. A concrete drain installed parallel to the cliff edge appears to be capable of intercepting storm runoff, but its effectiveness was undermined by lack of maintenance. We conclude that terrestrial-fluvial processes continue to erode coastal land and cause slumping of the cliff face at Berakas. However, coastal protection structures that curb the marine process could stabilize the coastline, even where sediment transport is active.

The purpose of this study is to analyze the challenges encountered by international nongovernmental organizations (INGOs) operating in armed conflicts within the Democratic Republic of the Congo (DRC) and the Central African Republic (CAR). Through a 20-month fieldwork analysis, this research maps logistical risks and highlights key obstacles on the ground for successful humanitarian deployments in dynamically changing and complex environments. The study brings together academics and practitioners, providing practical and concrete recommendations for nongovernmental organizations (NGOs) to focus on in the conflict zones studied.

Using a mixed-methods approach that combines qualitative and quantitative methods, this research provides valuable insights into the challenges faced by INGOs in conflict zones. After collecting data from the field, including interviews with key stakeholders and on-the-ground observations, the data analysis uses software tools such as Text Analysis Markup System analyzer and Macbeth. By adhering to ethical principles and incorporating a reflexive analysis, the study sheds light on the multidimensional nature of successful humanitarian deployments.

The primary risk in all armed conflict zones, including the DRC and CAR, is insecurity. However, to achieve a successful humanitarian deployment in such contexts, a multidimensional approach is required. This involves first securing the acceptance of local communities and conflict parties, which can be achieved through a deep understanding of both political and customary structures, with a focus on respecting key engagement leaders. Sustainability also plays a crucial role, and NGOs must maintain a secure stock of energy and provide greater initiative for on-the-ground managers to meet the expressed needs of beneficiary populations and involve them from the planning stage onwards. Finally, effective communication, cooperation and collaboration with United Nations Office for the Coordination of Humanitarian Affairs are essential to overcome procurement, technical and security risks, particularly during the initial deployment phases.

This study provides an illustration of the uncommon practice of conducting collaborative research in humanitarian settings amidst two neighboring areas of armed conflict. The authors identified 268 common risk factors across eight categories during five deployment phases. To analyze these risks based on criticality and NGO responsiveness, the authors used a multicriteria method. This approach allowed the authors to validate unanimous judgments, resulting in valuable insights and concrete recommendations.