Search results

Deficiencies or imbalances in dietary fat intake may influence on mental and neurological functions of children with autism spectrum disorders (ASD). This study aims to compare body mass index (BMI) and the amount of fatty acids intake in the autistic patients with the comparison group.

This case-control was carried out on 200 randomly selected children from 5 to 15 years old (100 autistic patients as the case group and 100 healthy children as the comparison group) in Tehran, Iran. The food frequency questionnaire (FFQ) was used to assess the intake of calorie, macronutrients and different types of dietary fatty acids including saturated fatty acids (SFA), monounsaturated fatty acids (MUFAs), poly unsaturated fatty acids (PUFAs), linoleic acid (LA), α-Linolenic acid (ALA), eicosapentaenoic acid (EPA), docosahexaenoic acid (DHA) and trans fatty acids.

The autistic patients had higher BMI, birth weight and mother’s BMI compared to the comparison group (All p < 0.01). No significant difference was found in the amount of dietary calorie, protein, carbohydrate and total fat intake between two groups. The risk of ASD was associated with higher intake of MUFAs (OR: 3.18, CI%:1.13–4.56, p = 0.04), PUFAs (OR: 4.12, CI95%: 2.01–6.25, p < 0.01) and LA (OR: 4.76, CI95%: 1.34–14.32, p < 0.01).

The autistic children had higher BMI and higher intake of unsaturated fatty acids except for omega-3 fatty acids. Further longitudinal studies are warranted.

Blood lipid and lipoprotein abnormalities are common among patients with diabetes. The study aimed to assess dietary fat intake and its association with blood lipids among patients with Type 2 diabetes mellitus (T2DM) considering sex differences.

A cross-sectional observational study was conducted with patients (207 males and 197 females) with T2DM. The daily food intake and its contents of fat and fat types were assessed through face-to-face interview. Anthropometric measurements, glycated hemoglobin (HbA1c), triglyceride, total cholesterol (TC), high-density lipoprotein (HDL) cholesterol and low-density lipoprotein (LDL) cholesterol were initially recorded.

The results revealed that TC, LDL and HDL cholesterol levels were significantly higher in females than in males. However, the TC: HDL ratio was significantly higher in males than in females. The results also showed that the daily intake of saturated fatty acid (SFA) slightly exceeded the daily recommended allowance. However, the monounsaturated fatty acid + polyunsaturated fatty acid/SFA (MUFA + PUFA/SFA) ratio was within the recommended ratio. In addition, this study found that the main sources of SFA and cholesterol intake were milk and milk products. A significant association between high fat intake and HbA1c levels was observed (r = 0.234, p < 0.001).

As it is a cross-sectional observational study, this study has the natural limitation where it can only demonstrate an association.

The types of dietary fat intake may contribute to blood lipid abnormalities and differences effects may exist among male and female. Studies on the effect of daily fat intake and its types on blood lipids in patients with diabetes, in particular Saudi patients with diabetes are limited. This study focused on the amount and type of the consumed fat among male and female Saudi patients with T2DM and studied the relationship between the type of consumed fat and blood lipid profiles.

The inflammatory potential of diet may play a role in the regulation of low-grade chronic inflammation derived from obesity. This study aims to investigate the relationship between the dietary inflammatory index (DII) and anthropometric indicators of adiposity among Turkish adults.

The study sample consisted of 833 young adults (mean age = 23 ± 5.2 years). The inflammatory potential of the diet was evaluated with a DII. Data on dietary intake were collected by a single 24-h dietary recall, and DII was estimated from 25 dietary components. Also, the Mediterranean diet (Med-Diet) adherence screener was applied using the 14-item assessment tool.

The proinflammatory diet was statistically associated with young (p < 0.001), singles (p < 0.001), high school degree (p = 0.011), students (p < 0.001), not working or unemployed (p < 0.001), eating outside (p = 0.016) and lower adherence to a Med-Diet (p = 0.027). There was a statistically significant positive relationship between the DII score and body weight (BW), waist circumference and waist-to-height ratio (WHtR) (r = 0.107; p = 0.002, r = 0.092; p = 0.008, r = 0.115; p = 0.001, respectively). Besides, there was a statistically significant negative relationship between MED score and BW, WHtR and neck circumference (r = −0.101; p = 0.004, r = −0.084; p = 0.016, r = −0.175; p = 0.000, respectively).

To the best of the authors’ knowledge, this was the first Turkish study to assess the association between the anthropometric indicators of obesity and DII or adherence to Med-Diet in young adults. Lower DII scores and higher adherence to Med-Diet are related to the better status of anthropometric indicators of adiposity.

This study aims to examine the relationship between muscle strength, eating index and blood pressure in adolescent girls. Growing studies show earlier onset of hypertension in youth. The prevalence may deteriorate during the COVID-19 pandemic due to unhealthy behavioral changes. Muscle mass (MM) is reported to be associated with blood pressure (BP), but there are limited studies that observed the relationship between the functional properties of muscle (muscle strength [MS]), healthy eating index (HEI) and BP.

This cross-sectional study involved 499 girls aged 15–18 years. HEI was generated from a 24-h food recall. MM and body fat (BF) were measured by bioelectrical impendence analysis (BIA), and MS and BP were measured by hand grip and Tensimeter, respectively. Multiple linear tests were performed to obtain an adjusted model.

Almost five out of 100 girls had high BP (4.8%) and a good diet (4%). The majority of them had desirable MM (75.9%) and low MS (50.1%). HEI negatively and MS are positively associated with systolic blood pressure (SBP). The inclusion of MM in the model diminished the association between MS and SBP completely. After adjustment for age and BF, only MM (ß = 0.19, 95% CI = 0.35, 0.95) was associated with SBP. HEI was inversely (ß = −0.16, 95% CI = −0.31, −0.09) whereas MM (ß = 0.13, 95% CI = 0.11, 0.53) was positively associated with diastolic BP.

Studies associating MM or MS with better physical performance and metabolic health are mostly reported in the elderly; current finding contributes to the lack of literature and implies the importance of examining those associations at a younger age.

HEI and MM are associated with young girls’ BP in different directions. Healthy eating and engagement in activities to optimize muscle function should be promoted in adolescent girls to alleviate the risk of getting cardiovascular disease.

Three-dimentional (3D) food printers are innovative technologies that contribute to healthy, personalized and stainable nutrition. However, many consumers are still vigilant about 3D printed food in the age of technology. The purpose of this study is to develop a scale and propose a model for consumption preferences associated with 3D-printed food (3DPF).

The developed questionnaire was handed to 192 Z and Y generation participants (Data1) for the exploratory factor analysis stage initially. Then, the questionnaire was handed to another group of 165 participants (Data 2) for verification by confirmatory factor analysis. Finally, the dimensions “healthy and personalized nutrition,” “sustainable nutrition” and “socio-cultural nutrition” were analyzed by structural equation modeling.

The results indicated that there was a high relationship between “healthy and personalized nutrition” and “sustainable nutrition” as well as between “sustainable nutrition” and “socio-cultural nutrition” when 3DPF was considered.

The study would contribute to the new survey area related to 3DPF by presenting a scale and proposing a model. Also, the study reveals which nutritional factors affect the Z and Y generation’s consumption of 3DPF. In this context, the study aims to make marketing contributions to the food production, restaurant and hotel sectors.

3D食品打印机是创新技术, 有助于健康、个性化和可持续的营养。然而, 在科技时代, 许多消费者仍然对3D打印食品保持警惕。本研究的目的是开发一个刻画与3D打印食品相关的消费偏好的量表并提出一个模型。

本研究首先将开发的问卷交给192名Z和Y世代参与者（数据1）进行探索性因素分析阶段。然后, 将问卷交给另一组165名参与者（数据2）通过验证性因素分析进行验证。最后, 通过结构方程模型分析了“健康和个性化营养”、“可持续营养”和“社会文化营养”这三个维度。

结果表明, 在考虑3D打印食品时, “健康和个性化营养”与“可持续营养”之间以及“可持续营养”与“社会文化营养”之间存在很高的关系。

本研究通过提出一个量表并提出一个模型, 为与3D打印食品相关的新调查领域做出了贡献。此外, 研究揭示了影响Z和Y世代对3D打印食品消费的营养因素。在这一背景下, 本研究旨在为食品生产、餐厅和酒店等领域做出营销贡献。

The COVID-19 pandemic has caused significant mortality and morbidity worldwide. However, the role of dietary patterns as a potential risk factor for COVID-19 has not been well established, especially in studies with large samples. Therefore, this study aims to identify and evaluate the association between major dietary patterns and COVID-19 among adults from Iran.

In this cross-sectional study, the authors included 9,189 participants aged 20–70 who participated in the Yazd Health Study (YaHS) and Taghzieh Mardom-e-Yazd study (TAMIZ). They used factor analysis to extract dietary patterns based on a food frequency questionnaire (FFQ). Then, they assessed the relationship between these dietary patterns and the odds of COVID-19.

This study identified two major dietary patterns: “high protein and high fiber” and “transitional”. Participants in the highest tertile of the “high protein and high fiber” dietary pattern, which included vegetables, fruits, dairy and various kinds of meats such as red meat, fish and poultry, had a lower odds of COVID-19 compared with those in the lowest tertile. However, the “transitional” dietary pattern did not affect the risk of COVID-19.

In conclusion, a “high protein, high fiber” diet may lower the odds of COVID-19. This study suggests that dietary patterns may influence the severity and spread of future similar pandemics.

The purpose of this paper is to investigate the performance of bio-based lubricants (BBL), namely, palm mid-olein (PMO) enriched with an antioxidant agent, tertiary-butylhydroquinone (TBHQ) and a viscosity improver, ethylene-vinyl acetate (EVA), in journal bearing (JB) applications.

Samples of the BBL were prepared by blending it with TBHQ and EVA at various blending ratios. The oxidative stability (OS) and viscosity of the BBL samples were examined using differential scanning calorimetry and a viscometer, respectively. Meanwhile, their performance in JB applications was evaluated through the use of a JB test rig with a 0.5 length-to-diameter ratio at various operating conditions.

It was found that the combination of PMO + TBHQ + EVA demonstrated a superior oil film pressure and load-carrying capacity, resulting in a reduced friction coefficient and a smaller attitude angle compared to the use of only PMO or VG68. However, it was observed that the addition of TBHQ and EVA to the PMO did not have a significant impact on the minimum oil film thickness.

The results would be quite useful for researchers generally and designers of bearings in particular.

This study used PMO as the base stock, and its compatibility with TBHQ and EVA was investigated in terms of its OS and viscosity. The performance of this treated BBL was evaluated in a hydrodynamic JB.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-11-2023-0363/

This study aims to get rid of non-degradable polyvinyl chloride (PVC) waste as well as sunflower seed cake (SSC) waste by preparing eco-friendly composites from both in different proportions to reach good mechanical and insulating properties for antimicrobial and antistatic applications.

Eco-friendly composite films based on waste polyvinylchloride (WPVC) and SSC of concentrations (0, 10, 20, 30 and 40 Wt.%) were prepared using solution casting method. Further, the effect of sunflower seed oil (SSO) on the biophysical properties of the prepared composites is also investigated. Fourier transform infrared spectroscopy, X-ray diffraction (XRD), scanning electron microscope, mechanical, thermal, dielectric properties were assessed. Besides, the antimicrobial and biodegradation tests were also studied.

The crystallinity increases by rising SSC concentration as revealed by XRD results. Additionally, the permittivity (ε′) increases by increasing SSC filler and SSO as well. A remarkable increase in dc conductivity was attained after the addition of SSO. While raw WPVC has very low bacterial activity. The composite films are found to be very effective against staphylococcus epidermidis, staphylococcus aureus bacteria and against candida albicans as well. On the other hand, the weight loss of WPVC increases by adding of SSC and SSO, as disclosed by biodegradation studies.

The study aims to reach the optimum method for safe and beneficial disposal of PVC waste as well as SSC for antistatic and antimicrobial application.

The purpose of this study is to successfully apply ultrasonic waves for the quick extraction of flax seed gum from flaxseed hull or whole seed and compare it to the standard technique of extraction.

The effect of the heating source, extracted time, temperature and pH of extracted solution on the extraction was studied. The obtained gum is subsequently used for silk screen printing on cotton, linen and viscous fabrics. Rheological properties and viscosity of the printing paste were scrutinized in the current study to get a better insight into this important polysaccharide. The output of this effort aimed to specify the parameters of the processes for printing textiles to serve in women’s fashion clothes by applying innovated handmade combinations of Islamic art motives using a quick and affordable method. Seven designs are executed, and inspiring from them, seven fashion designs of ladies’ clothes were designed virtually by Clo 3D software.

The result recorded that the new gum has excellent printing properties. In addition, they have better rheological properties, viscosity, chromatic strength and fastness qualities, all of which could help them in commercial production.

Flaxseed and three different fabric types (Cotton, Linen and Viscous) were used.

Synthesis of a new biodegradable thickener from a natural resource, namely, flaxseed, by applying new technology to save time, water and energy.

Synthesis of eco-friendly biodegradable thickener and used in textile printing alternative to the synthetic thickener.