Search results

Based on clarifying the structural difference between jade fibre and general polyester fibre, this paper aims to study the dyeing properties and dyeing adsorption mechanism of jade fibre with disperse dye and cationic dye.

The chemical structure and microstructure of jade fibre were briefly explained comparing with ordinary polyester fibre. The dyeing rate curve and dyeing adsorption isotherm of disperse dyes and cationic dyes on jade fibre were, respectively, studied. The dyeing uptake, dyeing absorption mechanism, and the main dyeing process parameters were proposed.

Jade fibre can be dyed with cationic dye and disperse dye. The suitable exhaust dyeing process is 110°C and 40 minutes for disperse dye, 100°C and 60 minutes for cationic dye. The dyeing uptake on jade fibre with both disperse dyes or cationic dyes is much higher than that on general polyester fibre and acrylic fibre, and the dyeing adsorption mechanism belongs to the combination of Langmuir and Nernst adsorption for disperse dyes and Langmuir adsorption for cationic dyes. Comparing with ordinary polyester fibre, jade fibre has the advantage of low temperature dyeing and reduced effluent, as is significant to energy-saving and emission reduction.

Jade fibre is a new type of modified polyester fibre with the function of health protection and energy conservation. There are little technical data in the literature at present about the dyeing property of jade fibre.

The essential properties of active sports fabrics are moisture management, quick-drying, body heat management and thermal regulations. Fibre type, blending nature, yarn and fabric structure and the finishing treatment are the key parameters that influenced the performance of the clothing meant for sportswear. This study aims to investigate the effect of fibre blending and structural tightness factors on bi-layer sport fabric's dimensional, moisture management and thermal properties.

In this study, 12 different bi-layer inter-lock fabrics were produced. Polyester filament (120 Denier) yarn was fed to form the backside of the fabric, and the face side was varied with cotton, modal, wool and soya spun yarns of 30sNe. Three different types of structural tightness factors were considered, such as low, medium and high were taken for sample development. The assessment towards dimensional, moisture management and thermal properties was carried out on all the samples.

The polyester-modal blend with a high tightness factor has shown maximum overall moisture management capability (OMMC) values of 0.73 and air permeability of 205.3 cm³/cm²/s. The same sample has shown comparatively higher thermal conductivity of 61.72 × 10^–3 W m^-1 °C^-1(Under compression state) and 58.45 × 10^–3 W m^-1 °C^-1 (under recovery state). In the case of surface roughness is concerned, polyester-modal blends have shown the lowest surface roughness, surface roughness amplitude and surface friction co-efficient. Among the selected fibre combinations, the overall comfort level of polyester-modal bi-layer knitted structure with a higher tightness factor is appreciable. Polyester-modal is more suitable for active sportswear among the four fiber blend combinations.

The outcome of this study will help to gain a better understanding of fibre blends, structural tightness factor and other process specifications for the development of bi-layer fabric for active sportswear applications. The dynamic functional testing methods (Moisture management and Thermal properties) were carried out to simulate the actual wearing environment of the sports clothing. This study will create a new scope of research opportunities in the field of bi-layer sports textiles.

This study was conducted to explore the influence of fibre blend and structural tightness factor on the comfort level of sportswear and to find the suitable fibre blend for active sportswear clothing.

Gourd fibres (GF) are a natural biodegradable fibre material with excellent mechanical properties and high tensile strength. The use of natural fibres in composite materials has gained popularity in recent years due to their various advantages, including renewability, low cost, low density and biodegradability. Gourd fibre is one such natural fibre that has been identified as a potential reinforcement material for composites. However, it has low surface energy and hydrophobic nature, which makes it difficult to bond with matrix materials such as polyester. To overcome this problem, chemically adapted gourd fibre has been proposed as a solution. Chemical treatment is one of the most widely used methods to improve the properties of natural fibres. This research evaluates the feasibility and effectiveness of incorporating chemically adapted gourd fibre into polyester composites for industrial fabrication. The purpose of this study is to examine the application of chemically modified GF in the production of polyester composite engineering materials.

This work aims to evaluate the effectiveness of chemically adapted gourd fibre in improving the adhesion of gourd fibre with polyester resin in composite fabrication by varying the GF from 5 to 20 wt.%. The study involves the preparation of chemically treated gourd fibre through surface modification using sodium hydroxide (NaOH), permanganate (KMnO₄) and acetic acid (CH₃COOH) coupling agents. The mechanical properties of the modified fibre and composites were investigated. It was then characterized using scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) to determine the changes in surface morphology and functional groups.

FTIR characterization showed that NaOH treatment caused cellulose depolymerization and caused a significant increase in the hydroxyl and carboxyl groups, showing improved surface functional groups; KMnO₄ treatment oxidized the fibre surface and caused the formation of surface oxide groups; and acetic acid treatment induced changes that primarily affected the ester and hydroxyl groups. SEM study showed that NaOH treatment changed the surface morphology of the gourd fibre, introduced voids and reduced hydrophilic tendencies. The tensile strength of the modified gourd fibres increased progressively as the concentration of the modification chemicals increased compared to the untreated fibres.

This work presents the designed composite with density, mechanical properties and microstructure, showing remarkable improvements in the engineering properties. An 181.5% improvement in tensile strength and a 56.63% increase in flexural strength were got over that of the unreinforced polyester. The findings from this work will contribute to the understanding of the potential of chemically adapted gourd fibre as a reinforcement material for composites and provide insights into the development of sustainable composite materials.

Fibre content can influence the intensity of odour that develops within clothing fabrics. However, little is known about how effective laundering is at removing malodours in clothing which differ by fibre type. The purpose of this paper is to investigate whether a selected cotton fabric differed in odour intensity following multiple wear and wash cycles compared to a polyester fabric.

Eight (male and female) participants wore bisymmetrical cotton/polyester t-shirts during 20 exercise sessions over a ten-week trial period. Odour was evaluated via a sensory panel, bacterial populations were counted and selected odorous volatile organic compounds were measured with comprehensive two-dimensional gas chromatography and time-of-flight mass spectrometry detection. Analysis occurred both before and after the final (20th) wash cycle.

Findings showed that laundering was effective in reducing overall odour intensity (p0.001) and bacterial populations (p0.001) in both cotton and polyester fabrics. Odour was most intense on polyester fabrics following wear, not just before, but also after washing (p0.001); although, no differences in bacterial counts were found between fibre types (p>0.05). Chemical analysis found C4-C8 chained carboxylic acids on both types of unwashed fabrics, although they were more prevalent on polyester.

The findings suggest that the build-up of odour in polyester fabrics may be cumulative as important odorants such as the carboxylic acids were not as effectively removed from polyester compared to cotton.

The purpose of this study is to analyse the characteristics of cellulose fibres derived from the pseudo-stems of Curcuma longa and to evaluate the properties of non-woven fabric produced using these fibres.

The fibres were extracted via a decortication method. The acquired intrinsic qualities of the fibres were used to assess the feasibility of using them in textile applications. The thermal bonding approach was used for the development of the non-woven fabric, using a hot press machine with low-melt polyester fibre as a binder.

The mean length of Curcuma longa fibres was determined to be 52.73 cm, with a fineness value of 4.00 tex. The fibres exhibited an uneven cross-sectional morphology, characterized by a diverse range of oval-shaped lumens. The fibre exhibited a tenacity of 1.45 g/denier and an elongation value of 4.30%. The fibres possessed a moisture regain value of 11.30%. The experimental non-woven fabrics had consistent weight and thickness, while exhibiting different properties in terms of tensile strength and air permeability, with Fabric C having the highest tensile strength and the lowest air permeability value.

The features of Curcuma longa fibre, obtained with the decortication process, exhibited suitability for textile applications. Three experimental non-woven fabrics comprising different compositions of Curcuma longa fibre and low-melt polyester fibre were produced. The tensile strength and air permeability properties of these fabrics were influenced by the composition of the fibres.

The purpose of this paper is to study the influence of fibre properties on filtration behavior. Air pollution is a major threat to human beings due to industrialization and urbanization. Among various particles in the atmospheric air, PM 2.5 causes various respiratory problems to human beings and also causes premature engine wear. The primary importance for the filters is higher filtration efficiency with lower pressure drop.

In this research, nonwoven filters were developed with different diameters of polyester fibres such as 0.8d, 1.2d and 6d fibres and different proportions of fibres were used. The Kuwabara cell model was used to derive certain parameters and its effects were analysed. The effect of basis length, solid volume fraction and porosity on filtration behavior was discussed in detail.

The filtration efficiency is higher for particle size from 1–3 µm, when different layers of polyester fibres are used with coarser fibres as the top layer and finer as the bottom layer. The filtration performance is better for layered nonwoven than unimodal nonwoven. The higher proportion of micro-denier fibres results in higher filtration efficiency with higher pressure drop.

The proposed research is more suitable for the particle size of more than 1 µm because of the fibre diameters and its achievable porosity. The filtration efficiency can be increased further by increasing the mass per unit area, which also increases the pressure and is not recommended.

The effect of triple-layers with different diameters of fibres on filtration was analysed. Due to the variation in diameters of fibres in different layers, the filtration performance varies.

Odour formation in textile material is mainly based on the fibre content and also the constituent fibres’ chemical and physical structures. Polyester fibre materials are very profound to form odour after being worn due to their highly oleophilic nature. The purpose of this paper is to analyse the odour formation characteristics of polyester fabric after surface modification through alkali treatment.

Five male participants were allowed to use the alkali-treated and untreated polyester fabrics, which were fixed in the axilla region of their vest. Subjective and objective odour analyses were performed for the worn samples. The odour was evaluated in terms of intensity rating, bacterial population (CFU/ml) and bacterial isolation.

The results showed that alkali treatment was effective in odour reduction in polyester fabric (p<0.005). The bacterial population density was also reduced significantly (p<0.005) in the alkali-treated polyester fabric compared to the untreated polyester fabric after the wear trial. The alkali treatment affected the surface structure of the polyester fabric and thus changed it from hydrophilic to hydrophobic. This was confirmed by the moisture management test results.

The odour formation in the polyester fabric can be controlled by simple surface modification process like alkali treatment, and thus the value of the product can be increased in the apparel sector.

In recent times, the usage of elastane-containing denim garments has increased, as it provides fit and comfort both at the same time. The purpose of the study is to understand the effect of abrasion on the durability of comfort related to body movement and shape retention property of the stretch-denim fabric.

The paper investigates the effect of abrasion on the initial tensile properties, recovery and resilience properties of the stretch-denim fabric. Further, to analyse the effect of the composition of the elastane yarn, three different types of elastane yarns having different types of sheath (covering) fibre, structure and different levels of elastane content have been used in the weft.

The comfort related to body movement and the shape retention properties of the stretch-denim fabric got affected due to abrasive damage. The elastane yarn composition and structure played an important role in determining the extent of the change in such properties during abrasion. The fabric with a higher level of elastane content suffered a greater loss in shape-retention properties due to abrasion. The extent of mass loss in stretch-denim fabric does not always correlate to the extent of loss in the comfort and shape-retention properties.

Most of the earlier studies have investigated the effect of abrasion on the durability aspect of the stretch-denim fabric. In a practical scenario, the stretch-denim garments are rarely discarded due to tearing or change in appearance but mainly due to bagging, i.e. distortion in shape after usage. Thus, the study on the combined effect of the abrasion and cyclic loading on the comfort and shape-retention properties will help to predict the performance of the apparel during usage.

Recycled fibres used as reinforcements are obtained from garment cut wastes of cotton, polyester and cotton/polyester fabrics to develop these composites. These composites are developed by using Epoxy resin, Kaolinite, Polypropylene sheet as matrices. Reinforcements and matrices have been used in different compositions and combinations to develop these composites. The main advantages of this type of composites are to combine the different properties of different materials to obtain unique and high-performance material.

Garment cut wastes from apparel industries are used for various applications in various industries. Normally, garment cut wastes and recycled fibres from garment cut wastes are used in textile, furniture, carpet, paper, automobile, construction and agricultural industries in low mechanical performance applications. In this research, composites are developed by using recycled fibres obtained from garment cut wastes as reinforcement and with different types of matrices.

Technical properties like thickness, mass per unit area, Tensile strength, Flexural strength, Impact strength, Water absorbency and Scanning Electron Microscope of developed composites were tested and analyzed. The outcome of the results demonstrates that many of the composite proportions with different blend, reinforcement and matrcies show superior mechanical performances when compared with each other, and it can be recommended for many potential applications.

The properties of composites are dependent on the different blend proportions of recycled fibres with reinforcement and matrices. Based on the result of tensile strength, polyester/cotton fibre reinforced composites show superior strength compared to other recycled fibre reinforced samples and it can be suitably tailored further by appropriate design of different lay-up angle and orientation with the number of different preformed layers of reinforcements to suit the intended applications.

Sewing thread plays an important role in transforming a two-dimensional fabric into three-dimensional garment. Over the years, ring spinning has been dominating the yarn market because of its consistent performance. Eli-Twist spinning system, a new method of yarn manufacture, provides a product with improved mechanical and physical properties than the conventional ring-spun yarn. It is the process of producing a two-ply compact yarn with improved fibre utilisation. The purpose of this paper is to assess the feasibility of using Eli-Twist yarn as a sewing thread and to compare its performance with conventional thread.

In this study, regular polyester and Indian cotton were used to produce the Eli-Twist and conventional TFO thread. Three different blends (100 per cent polyester, 50/50 polyester/cotton [P/C] and 100 per cent cotton) were taken to produce three different counts (39.4 tex, 29.5 tex and 23.6 tex) from each composition. The hairiness, tenacity, breaking elongation and coefficient of yarn-to-metal friction of threads were tested and a comparative analysis was made. The seam performance of all the threads was judged by seam strength, seam efficiency and seam elongation.

The results show that the mass irregularity and imperfections are more or less similar for both types of threads. Eli-Twist sewing thread has shown less friction, less hairiness and higher tensile strength. The Eli-Twist sewing thread was found to be better than the conventional two-ply sewing thread. The seam performance parameters, such as seam strength, seam efficiency and seam elongation of the Eli-Twist thread showed significantly improved performance.

The main concern of this study is delineating the performance of the Eli-Twist sewing thread. No study in this regard has been reported so far. The improved physical and mechanical behaviour of the Eli-Twist yarn has prompted to assess its performance as sewing thread.