Search results

This paper aims to investigate the performance of four different textile materials used as an outer shell of the bulletproof vest.

In this paper, four different textile materials were used, polyurethane treatment was applied as a surface coating for the woven samples. Mechanical properties were conducted for all samples; scanning electron microscope and X-ray energy disperse spectroscopy were executed to show the surface morphology of samples and the chemical composition of the coating material.

One-way ANOVA was used to statistically analyse the results, which proved that all variables were highly significantly affected by using different textile materials, despite the stiffness variable being not significantly affected by textile materials. An overall evaluation was done using radar chart, demonstrated that Cordura material accomplished the best functional performance, using two types of calibres 7.62 × 54 mild steel core and 7.62 × 54 armour piercing incendiary; the common mechanism was localized burn because of the incendiary effect of the projectile in addition to tearing mechanism starting from inside because of penetration effect of the steel core.

This work was addressed to analyse the impact of using four different materials on its performance as the outer shell of bulletproof vest to achieve the desired degree of protection.

The purpose of this paper is to examine the thermal insulation and water vapor transmission rate (WVTR) according to the type of the filling material, and compared the thermal insulation in the dynamic state considering actual wearing conditions.

The thermal insulation and WVTR were evaluated in a standard state depending on the type of filling material (goose down (GD), duck down (DD), Thinsulate700 (T700), Thinsulate600 (T600) and Polyester (PET)), and the changes in thermal insulation were examined by measuring the microclimate in the case of an environmental change from a high temperature to a low temperature. In addition, the clumping of filling material and the changes in the thickness/weight depending on the laundry process were observed, and the relationships with the thermal insulation were analyzed.

The results showed that for natural filling materials (GD and DD), the thermal insulation deteriorated significantly due to changes in the thickness/weight after laundering ten times, and water washing was more appropriate than the dry cleaning. On the other hand, the artificial filling materials (T700, T600 and PET) showed a relatively smaller difference, except for clumping, when they went through more dry cleaning or water washing cycles compared to the natural filling materials.

The results showed that the laundry methods have different effects on the damage to the filling material, the change in thermal insulation, and the change in the comfort-related physical property. Therefore, it is important to select the optimal laundry method depending on the filling material.

Develops an original 12‐step management of technology protocol and applies it to 51 applications which range from Du Pont’s failure in Nylon to the Single Online Trade Exchange for Auto Parts procurement by GM, Ford, Daimler‐Chrysler and Renault‐Nissan. Provides many case studies with regards to the adoption of technology and describes seven chief technology officer characteristics. Discusses common errors when companies invest in technology and considers the probabilities of success. Provides 175 questions and answers to reinforce the concepts introduced. States that this substantial journal is aimed primarily at the present and potential chief technology officer to assist their survival and success in national and international markets.

The purpose of this study was to determine whether there are differences in skin temperature under graphene-infused fleece and traditional polyester fleece materials in the interior of a wetsuit.

A total of 48 participants surfed for a minimum of 40 min in a custom wetsuit with a torso lined with graphene-infused fleece on one half and traditional polyester fleece on the other. Eight iButton thermistors were used to record skin temperatures bilaterally at the upper back, chest, abdomen and lower back every minute for the entire surf session. After surfing, participants responded to questions associated with their perception of warmth and comfort and their knowledge of fleece materials.

Skin temperatures did not differ between the two types of fleece at the upper back, chest and abdomen locations. Skin temperatures in the lower back were significantly warmer under the traditional polyester fleece compared to graphene-infused fleece. Participant responses associated with warmth were consistent with skin temperature measurements.

The results of this study indicate that a graphene-infused nylon fleece interior does not clearly influence skin temperature in surfers when compared to a traditional polyester fleece interior. While skin temperatures were significantly lower under the graphene-infused nylon fleece at the low back, the other three anatomical locations did not exhibit significant differences.

Thermoregulation is an important consideration for the safety and performance of surfers in the ocean. Evidence suggests that the inner lining of a wetsuit may impact thermoregulation while surfing; however, no prior studies have compared interior materials.

To have a better understanding of the heat transfer mechanisms in a sleeping bag and to investigate the factors influencing thermal resistance of a down sleeping bag.

The mechanism of heat transfer in a sleeping bag was discussed in this paper. The thermal resistances of 24 samples were investigated. Besides, the relation between fill weight and thermal resistance, and that between the air permeability of fabric and thermal resistance, as well as that between down filling rate and thermal resistance were analyzed.

The results showed that thermal resistances of samples varied from 0.35 to 0.8 m² K/W. The fill weight was the most important factor of thermal resistance of sleeping bag and the relation between fill weight and thermal resistance matched well with cubic function. A multiple regression formula was proposed, which with thermal resistance as a dependent variable and with air permeability of fabric, down filling rate, fill weight as independent variables.

Thermal properties of a sleeping bag were analyzed through simplified basic unit under simplified environment conditions, which was necessary for building the first stage of systematic study of thermal performance of a sleeping bag.

The purpose of this paper is to compare morphological and physical features of three kinds of materials intended for the insulating layer in the clothing protecting against cold – high-bulk non-woven, goose down (GD) and duck down (DD).

Comparison of thermal performance of developed textile systems with the non-woven, GD and DD content was based on basic biophysical properties related to comfort sensations of the user such as thermal resistance, water vapor resistance and air permeability. In this study, light microscopy and scanning electron microscopy methods were employed to visualize the surface and internal structure of non-woven, GD and DD samples.

The paper indicates the advantages and disadvantages of each of selected insulating material. For the down samples, significantly higher thermal resistance in a dry state than for the non-woven samples can be achieved. Meanwhile, textile systems with the non-woven provide lower value of water vapor resistance. The selected textile systems for the research were characterized by a comparable air permeability.

This paper allows for an evaluation of high-bulk non-woven, DD and GD samples in terms of providing optimal thermal performance in clothing protecting against cold.

The paper aims to use the Trilobal® polyester (Y cross-section) for producing fabrics suitable for fencing suits and evaluating their various properties.

Double weave structure was chosen to produce the samples by using six different face structures and two back structures divided into two groups according to the back structures. They were evaluated by their physical and mechanical properties such as tensile strength, puncture resistance, air permeability and humidity properties in horizontal and vertical wicking, drying rate and water vapor transmission.

Fencing sport recently is one of the most growing sports in the world, which necessitates special requirements and properties of fencing suit, either mechanical properties, which allow the easily and freely movement for the athlete, or the comfort properties that save the player’s effort and energy for a long time to improve his performance.

ANOVA test analysis showed highly significant results in some properties comparing back and face structures of the double weave fabric high correlation coefficient were found between packing density factor of produced fabric and the weft material types. The final results showed the produced sample that weaved with plain 1/1 for back structure and warp rib 2/2 for face structure achieved the best results, followed by the produced sample weaved with plain 1/1 for back structure and weft rib 2/2 for face structure compared with the other produced samples.

The texturalcentric model of non‐attribute‐based visual and tactile response to textural fabric surfaces was used to elicit definitive qualities or dimensions of textural fabric surfaces. Multidimensional scaling analysis permitted subjects to provide numeric judgements of fabrics rather than using words with individuals' historic definitions of those terms, or without understanding some terms. Objectives of the study included validating the attributes identified by college students, and ascertaining the persistence of attributes that contribute to visual and tactile perception of adult women (25–45 years of age) and older women (60 years of age and older). One‐hundred‐and‐twenty subjects (50 per cent adult, 50 per cent older) provided visual or tactile ratings of the similarities of 30 fabrics. Data were subjected to multidimensional scaling analysis and coefficients of congruence were calculated. Dimensions or characteristics of fabrics were named using bipolar adjectives: rough to smooth, plane to depth, irregular to regular surface units, shiny to matt, fine to coarse, lightweight to heavyweight, simple to complex, hard to soft compressibility, pliable to stiff, harsh to slippery, small units to large units, open to compact, and soft to bumpy‐rough. From these, a schema for the textural perception of fabric surfaces, was modelled.

Protected Ducking Rollers. Ducking rollers used in the pickling of continuous steel strip can now be fully protected against chemical corrosion. This development by Tanks & Linings Ltd. provides a roller with a plasticised PVC outer skin.

Keeping pace with the new proprietary products offered each year are the new raw materials from which many of these are formulated.