Search results

Additive manufacturing (AM) is one of the latest and most advanced technologies that are continuously expanding into various field applications. Undoubtedly, fused deposition modeling (FDM) is one of the oldest and extensively used AM technologies not only because of the advantage of low cost, comparatively moderate production speed and negligible wastage but also due to acceptance of a wide range of thermoplastics, reinforced and blended feedstock for making the end product suitable for service. The purpose of this work to perform mechanical characterization of standard samples printed on FDM with acrylonitrile butadiene styrene (ABS), shape memory polymer (SMP; make Polyflex^TM) and ABS/Polyflex^TM blend and a comparative study from AM view point.

A low-cost desktop-based FDM setup was used for the fabrication of the test specimens under different processing conditions. Experiments were conducted as per obtained control log, and statistical analysis was conducted to understand the effect of selected variables in response of measured properties. Further, scanning electron microscopy-based micrographs were analyzed to understand the fracture mechanisms.

The obtained results highlighted that the mechanical properties of FDM parts are strongly influenced by the selected process variables. However, in case of most of the measured properties, selection of suitable feedstock has dominated the other input variables. Further, the results of test parts made with in-house developed ABS/SMP blend have showed the attainment of remarkable values of both strength and elasticity.

This work is held to empower the use of FDM technology to fabricate advanced and robust components for serving highly demanding applications.

This paper aims to investigate the dimensional accuracy consisting of thickness, grip section width, full length, circularity, cylindricity and surface finish of printed polyurethane dog-bone samples based on American Society for Testing and Materials D638 type V standard, which were optimally printed by fused deposition modelling (FDM).

The experimental approach focuses on determining main effects of printing parameters, including nozzle temperature, infill percentage, print speed and layer height on dimensional error and surface finish of the printed samples, followed by the confirmation tests to warrant the reproducibility of experimental results.

This study shows that layer height has the most significant impact on dimensional accuracy and surface finish of printed samples compared to other printing parameters, whereas infill density has no significant effect on all sample dimensions.

This paper presents a comprehensive study relating to various dimensional accuracies in terms of full length, grip section width, thickness, circularity, cylindricity and surface finish of dog-bone samples printed by FDM to improve the printability and processibility via additive manufacturing.

Additive manufacturing (AM) technology has a huge influence on the real world because of its ability to manufacture massively complicated geometrics. The purpose of this study is to use CiteSpace (CS) visual analysis to identify fused deposition modeling (FDM) research and development patterns to guide researchers to decide future research and provide a framework for corporations and organizations to prepare for the development in the rapid prototyping industry. Three-dimensional printing (3DP) is defined to budget minimize manufactured input and output for aviation and the medical product industrial sectors. 3DP has implemented its potential in the Coronavirus Disease of 2019 (COVID-19) reaction.

First, 396 original publications were extracted from the web of science (WOS) with the comprehensive list and did scientometrics analysis in CS software. The parameters are specified in CS including the span (from 2011 to 2019, one year slice for the co-authorship and the co-accordance analysis), visualization (show the merged networks), specific criteria for selection (top 20%), node form (author, organization, region, reference cited; cited author, journal and keywords) and pruning (pathfinder and slicing network). Finally, correlating data was studied and showed the results of the visualization study of FDM research were shown.

The framework of FDM information is beginning to take shape. About hot research topics, there are “Morphology,” “Tensile Property by making Blends,” “Use of Carbon nanotube in 3DP” and “Topology optimization.” Regarding the latest research frontiers of FDM printing, there are “Fused Filament Fabrication,” “AM,” in FDM printing. Where “Post-processing” and “environmental impact” are the research hotspots in FDM printing. These research results can provide insight into FDM printing and useful information to consider the existing studies and developments in FDM researchers’ analysis.

Despite some important obtained results through FDM-related publications’ visualization, some deficiencies remain in this research. With >99% of articles written in English, the input data for CS was all downloaded from WOS databases, resulting in a language bias of papers in other languages and neglecting other data sources. Although, there are several challenges being faced by the FDM that limit its wide variety of applications. However, the significance of the current work concerning the technical and engineering prospects is discussed herein.

First, the novelty of this work lies in describing the FDM approach in a Scientometric way. In Scientometric investigation, leading writers, organizations, keywords, hot research and emerging knowledge points were explained. Second, this research has thoroughly and comprehensively examined the useful sustainability effects, i.e. economic sustainability, energy-based sustainability, environmental sustainability, of 3DP in industrial development in qualitative and quantitative aspects by 2025 from a global viewpoint. Third, this work also described the practical significance of FDM based on 3DP since COVID-19. 3DP has stepped up as a vital technology to support improved healthcare and other general response to emergency situations.

This research aims to focus on developing a customized support surface using additive manufacturing (AM) for effective pressure relief for patients who are in bed or wheelchair suffering from pressure ulcers (PU).

A novel customized support surface is developed using AM technology incorporated with magnetic levitation and ball and socket mechanisms. Magnetic levitation provides cushioning effect for the developed cushion to users who are sitting in a wheelchair and increases the rate of healing. The ball and socket mechanism provides the user body's self-adaptive mechanism and reduces shear and friction forces between the surfaces of the additive manufactured cushion and the human buttocks.

From the results of ISO 16480-6 biomechanical standardized tests, the additive manufactured support surface performed better than, or on par with, the most widely available commercial cushions. It is evident that the developed cushion’s peak pressure values are lower when compared with other cushions. The overall efficiency of the developed cushion was qualitatively reported; 67% of people felt it was excellent and 22% of people responded as good and 11% were satisfactory. Henceforth, the overall effectiveness of the developed support surface provides a better experience to the end-user in the view of PU reduction.

A developed additive manufactured customized support surface will be an alternative approach for the reduction of PU, and it overcomes the drawbacks faced by the currently available cushions.

To explore the influence of various factors on the adhesion strength of 3D printing materials and chiffon fabrics, and to develop an original design clothing prototype with an extended functionality that would be compatible with the specifics of the circular design.

Four different chiffon fabrics and four 3D printed materials were chosen as the research subjects to determine the influence of various factors on the adhesion strength and ductility. The uniaxial tensile test was used to determine pull-out force and the pull-out elongation from the interlayer.

3D printed TPU elements can be used to join clothing parts made from low-elasticity chiffon fabrics to improve wearing comfort. In order to comply with the circular economy concept, it is important to select such adhesion parameters of the 3D printed elements and the material system that would ensure wear comfort and withstand wear-level loads; and at the end of the life cycle of a garment, the 3D printed elements could be separated from the product and recycled.

The systems developed can be used to renew and repair products, adding originality, individual touch or additional decorative features, while extending the functional possibilities of clothing items in accordance with circular design principles.