Search results

This paper aims to select a type of mordant from aluminium salts, namely, aluminium sulphate, aluminium nitrate and polyaluminium chloride (PAC) with the lowest potential for contamination so that their use will minimise pollution from natural dye waste. It also aims to determine the pollution value of natural dye immersion waste from jackfruit wood extract, secang wood, mangsi fruit and several synthetic dyes, to identify potential environmental pollution.

Dyeing with natural dyes was performed by exhaust at room temperature by the pre-mordant method, while with synthetic dyes it was performed by exhaust according to the dyeing procedure (reactive, vat and naphthol). The groundwater, mordant solutions, natural dye extract and the waste-water from the natural and synthetic dyes were then tested to determine their biological oxygen demand (BOD₅), chemical oxygen demand (COD), total suspended solids (TSS), pH, Al and heavy metal contents such as chromium (Cr), copper (Cu), cadmium (Cd), nickel (Ni), cobalt (Co) and lead (Pb).

Aluminium sulphate had the lowest pollution load while PAC had the highest, as aluminium sulphate had a higher BOD₅/COD ratio (0.62–0.67) than aluminium nitrate (0.56–0.64) or PAC (0.44–0.54). The dyeing waste from the three natural dyes contained an acidic pH of 3.5–4.2, Al of 75.280–621.34 mg/L, Cr of 0.154–0.215 mg/L and Cu of 0.035–0.072 mg/L. The values of TSS, COD and BOD₅ are higher than the quality standards of the waste but are environmentally friendly because the ratio of the BOD₅/COD values from the waste ranges from 0.44–0.67.

The findings indicate that as a mordant, aluminium sulphate results in lower pollution loads than aluminium nitrate and PAC. However, all three mordants contain Cr and Cu, albeit in negligible concentrations. Therefore, it is recommended that future studies strive to identify a mordant that has lower pollution loads and does not contain metals but can increase dyeing results to satisfy consumer requirements. It is the hope that, with the discovery of a new mordant, natural dyes will be the solution for the heavy metal pollution caused by synthetic dyes.

The use of environmentally-friendly mordants and natural dyes in the Indonesian textile and batik industry will give rise to superior quality eco-textile and eco-batik products. Such environmentally-friendly and high-quality products will not only increase competition and consumer interest but increase product sales as well which will, in turn, increase incomes and the economy. Additionally, an increase in the use of natural dyes by the textile and batik industry will serve as additional income to the communities and farmers from which the raw materials for the natural dyes are sourced thereby creating jobs and increasing welfare.

As environmentally-friendly mordants and natural dyes replace the hazardous and toxic materials currently used in the textile and batik industry, it guarantees the health and safety of its consumers and workers. Furthermore, as the waste-water produced is biodegradable, it reduces river and groundwater pollution. It is, therefore, expected that this information will not only lead to a shift in attitude within the textile and batik industries but the adoption of environmentally-friendly materials, for the sake of the environment, as well as the development of eco-textile and eco-batik products.

Aluminium sulphate is a mordant type of aluminium salt with a lower potential for contamination than aluminium nitrate and PAC. However, PAC has been discovered to be a mordant for natural dyes, as has the fruit of the mangsi shrub, which has recently been discovered as a naturally occurring blue dye.

The purpose of this paper is to provide a solution for greening the supply chain of small and medium enterprises (SMEs) by minimising the vehicular pollutant emission in the logistics network.

The paper proposes an optimisation model to reduce the pollution emission in the logistics of supply chain network in SMEs. The work considers vehicle routing and selection of suppliers, manufacturers and assemblers according to the availability of various Bharat Stage Emission Standards type vehicles. Introsort sorting based selection algorithm is used to solve the problem. The proposed solution is implemented using C++ on an experimental data set for analysing the model.

The outcome of the study is a pollution optimisation model for logistics of SMEs. The finding shows an approach to reduce total vehicular pollution emission in the logistics network in meeting the demand. The model is tested over an experimental study, and the result findings show which supply chain entities, type of environmental standard vehicles and vehicle routes are selected for the specific demand.

The proposed model is confined to pollution optimisation with limited parameters only and does not consider cost and other factors that can be included in future work.

The work can be used for limiting pollution in logistics system as the corporate social responsibility of enterprises.

Proposed work presents a sustainable and green solution for pollution control in logistics activities of the SMEs.

The computer technology (CT) for modelling of the ecology‐economic situation in the alienation zone (AZ) of Chenobyl is developed. It includes the databases of potentially dangerous objects and program modules (PM) for modelling of the ecology‐economic situation in the AZ. The optimal redistribution of means, directed at resource restoration, liquidation of technogenic pollution, the restoration of basis capital, prevention of pollution migration for bounds of the AZ is determined by use of this model. A distinctive feature of the accounts carried out in this work is that they allow the estimation not only of risk value, but also of levels of reserve possiblities of various objects of the AZ. The critical values of measured parameters, at which achievement the emergencies can occur, are also determined. The CT includes the following program modules: geo‐information system; PM for risk assessment of emergency occurences in the AZ; PM for dynamic optimisation tasks.

The purpose of this paper is to explore and investigate the process of green management adoption in small and medium‐sized enterprises.

The study used the qualitative methods of case study, in‐depth interviews and document analysis to collect data from two companies, one in the acoustic equipment, the other in the electronics industry.

The paper finds that the extant literature in the field of business and management has largely ignored green management practices within small and medium‐sized enterprises (SMEs). The study finds that SMEs can make themselves greener by making strategic and organizational changes. For greener management, the factors of organizational structure, innovation capability, human resources, cost savings and competitive advantage can influence organizational change. The outcomes of the case studies confirmed this. The paper argues that further research is needed in order to identify how management practice might reduce negative sustainability impacts. The paper argues that such research can benefit from the methodological and theoretical insights of other disciplines.

The paper is of benefit to academics and managers by providing a new way to consider green management and strategies of SMEs. Since green sustainability is obviously challenging to all companies, to increase understanding of how to cope with green management is necessary, but has been rarely researched in SMEs.

Drawing on the natural resource-based view (NRBV) and dynamic capability perspectives, the current study investigates the extent to which environmental supply chain strategies (ESCSs) predict the dimensions of sustainable performance of manufacturing firms.

In a cross-sectional survey, data were drawn from eight (8) listed manufacturing firms in Ghana: Aluworks Ltd, Unilever Ghana Plc, Fan Milk Limited, Guinness Ghana Breweries Limited, Cocoa Processing Company, Dannex Ayrton Starwin Plc, Benso Oil Palm Plantation Ltd and Samba Foods Ltd. The data from 396 respondents were analysed with partial least square structural equation modelling (PLS-SEM) approach to test the research hypotheses.

The study revealed that environmental, social and economic sustainability performance reporting indicators were positively and significantly predicted by ESCSs of manufacturing firms in an emerging economy.

In essence, the results provide broad support to the assertion that sustaining companies over several generations largely depends on understanding and implementing proactive green strategies or otherwise perish.

The study contributes to the few studies that investigate ESCSs and sustainability performance issues in emerging economies, like Ghana, where sustainability is on the verge of gaining momentum.

Contends that the environment is the vehicle to greater profits in the 1990s. States that organizations should comply with customer demands, and recent surveys show consumers are willing to pay more for environmentally‐friendly products. Covers areas such as managing vs. controlling pollution, cost minimization and life‐style costing. Concludes that waste and pollution reduction can cut costs and thus increase revenue.

To achieve the optimum performance of electric transmission power system performance, the possibility of generators’ failure and the consequences are amongst the most important and real assumptions which should be taken into consideration. This paper aims to recognize the most influential factors on generators’ failures that can have a deep effect on the total cost and environmental issues. The integrated proposed approach is useful for investigating the generators’ failure effects on the performance of electric power transmission grids from the economic and environmental perspectives. In other words, the cost and pollution minimization policies are considered to decrease the unfavorable generators’ failure effects on electric power flow.

The data used in this study are gathered from a real case in USA in first step, the influential generator points that their failure has a significant effect on the objective function, have been recognized. Then, different failure scenarios are defined, and the optimum values in each of these scenarios through the GAMS modeling software are found. Consequently, by using a two-level factorial design approach, the critical generators across the power grid are determined.

The results show that by using such information, it is possible to detect the significant nodes in the power system grid and have a better maintenance plan. In addition, by means of this analysis and changing the capacity of main generators, it is possible to significantly reduce the operation costs. By comparing the indexes in case of the generator’s location, it seems that some of them are critical because of their capacity and position in the network (as their failure causes infeasibility in the model). Also, some of these deficiencies caused considerable index changes and critical consequences.

The integrated proposed approach is useful for investigating the generators’ failure effects on the performance of electric power transmission grids from the economic and environmental perspectives. In other words, the cost and pollution minimization policies are considered to decrease the unfavorable generators’ failure effects on electric power flow.

This paper endeavors to recognize the most influential factors on generators’ failures that can have a deep effect on the total cost and environmental issues.

The integrated proposed approach is useful for investigating the generators’ failure effects on the performance of electric power transmission grids from the economic and environmental perspectives. In other words, the cost and pollution minimization policies are considered to decrease the unfavorable generators’ failure effects on electric power flow.

This chapter explores the state's response to the waste crisis (see also McDonagh, Varley, & Shortall, 2009). The conceptual basis for key turning points in the state's waste management policy is located within the parameters of an EM approach. An outline of eco-modern and sustainable thinking is provided in the chapter, as the state's policy shift on waste, from a reliance on landfill to a strategy informed by the EU's waste hierarchy would provide many of the political opportunities for GSE, and their political allies, to exploit.

The main purpose of this study is to provide technical support for industrial firms in a new Egyptian industrial city in order to comply with the National Regulatory Standards for wastewater discharge into the public sewerage network.

An execution plan has been prepared to identify the existing environmental status of all the enterprises in the city. To accomplish the planned activities, relevant information was collected from the available records in the city. A unified questionnaire format has been designed for all enterprises including all activities and information required for this study. Accordingly, industries were classified according to their activities and sizes. The information was fed to the computer using a database to control data entry, analysis, and retrieval. Also, the work plan included industrial auditing, wastewater characterization, and application of pollution prevention measures and treatment of end‐of‐pipe.

Statistical analysis of the collected data showed that 119 enterprises were distributed among different industrial sectors. The size of factories according to number of employees is categorized as micro, small and medium. Characterization of industrial wastewater produced from 37 plants indicated that 50 percent thereof do not comply with the Egyptian environmental laws, for industrial wastewater discharge into the public sewage network. In this study, three factories were selected to solve their environmental problems. Treatability studies and/or pollution prevention approaches for the selected factories were carried out and the recommended solutions were implemented and proved to be cost‐effective.

This paper provides the guidelines for other factories in this Egyptian industrial city to be environmentally friendly via compliance with the local regulatory standards. Dissemination of the achieved results can be applied by other industrial cities in Egypt.

This paper studies the relevance of the “greening of production” in the South‐East Asian context. It investigates the various initiatives taken by the companies of this region and thereby identifies the factors that are critical in the process of greening production in this region. The significance of the factors are ascertained and validated through an empirical research that has been conducted across five countries of the region employing the structural equation‐modeling framework.