Search results

The purpose of this article is to develop a bi-directional relaxed flexible bay structure (BRFBS) in the layout for the unequal area facility layout problems (UA-FLPs) and test the suitability of the proposed approach using literature data.

This research adopts a two-stage solution approach for UA-FLPs to form BRFBS in the layout. The solution to UA-FLPs is carried out in discrete space. The proposed heuristic method optimises the layout plan for minimising the material handling cost (MHC), and also, it indirectly optimises the space utilisation by reducing the empty space in the layout. The first stage of layout design assumes that all facilities are equal in size and uses quadratic assignment problem (QAP) model. QAP is solved with a simulated annealing heuristic method. In the second stage, a heuristic method is proposed to find the optimum width for each bay and the dimension for facilities. The proposed heuristic method is tested with numerical data available in the literature. Results are compared with the results obtained by layout planning software, and with the simulated annealing algorithm for flexible bay structure (SA-FBS) heuristic procedure for continuous space UA-FLPs.

The proposed two-stage solution approach gives the BRFBS for the UA-FLPs. BRFBS helps to create proper aisle structure in the layout plan. The layout configuration and solution of the proposed method is better than the layout planning software solution and SA-FBS solution. The application of the proposed heuristic method to case data gave lesser MHC, better space utilisation and better aisle formation than the existing layout.

The proposed approach has the limitation that it can be applied only to UA-FLPs solved in discrete space. When the UA-FLPs are solved in continuous space, then it is not possible to make application of this approach to form bi-directional relaxed flexible bays in the layout plan.

Most of the modern industries are automated, and they use material handling equipment (MHE) like automated guided vehicles (AGVs). Design of layout plans that help to create proper aisle structure for AGV’s in the layout plan is a challenging to the researchers. The BRFBS configuration is more suitable in the flexible manufacturing system where AGVs are used for material transportation.

This paper proposes a novel two-stage heuristic method for solving the UA-FLPs in discrete space. The proposed approach generates a BRFBS in the layout plan. The BRFBS helps to create a proper aisle structure suitable for better material handling operations. Hence, this type of layout helps in easy interaction of the MHE (e.g. AGVs) with the boundaries of the facilities touching the aisle.

As far as the authors know, no research has already been carried out on the multi-floor dynamic facility layout problem (MF-DFLP) in the continuous form regarding the flexible bay structure, the number and the variable location of the elevator. Therefore, the present paper models the given problem and attempts to find a sub-optimal solution for it using a meta-heuristic simulated annealing (SA) algorithm.

The efficient use of resources has always been a prominent matter for decision-makers. Many reasons including land use, construction considerations and proximity of departments have led to the design of multi-floor facilities. On the other hand, their fast-evolving environment calls for dynamic planning. Therefore, in this paper, a model and the SA algorithm for MF-DFLP are presented.

After presenting a mathematical model, the problem was solved precisely in a small size using the GAMS software. Also, a near-optimal solution method using a SA meta-heuristic algorithm is suggested and the proposed algorithm was run in the MATLAB software. To evaluate the presented model and the proposed solution, some test cases were considered in two aspects. The first aspect was the test cases that are newly generated in small, medium and large sizes to compare the exact optimal solution with the results of the meta-heuristic algorithm. Eight test cases with small sizes were solved using the GAMS software, the optimum solutions were obtained in a reasonable time, and the cost of their solutions was equal to that of the SA algorithm. Eight test cases with medium sizes were run in the GAMS software with the time limit of 80,000 s, and the SA algorithm had performed better for these test cases. Two test cases were also considered in large size that GAMS could not solve them, whereas the SA algorithm successfully found a proper solution for each. The second aspect included the test cases from the literature. The result showed that suggested algorithm is more capable of finding best solutions than compared algorithms.

In this paper, an unequal area MF-DFLP was studied in a continuous layout form in which the location and number of the elevators were considered to be variable, and the layouts were considered with flexible bay structure. These conditions were investigated for the first time.

Ready-mix concrete delivery problem (RMCDP), a specific version of the vehicle routing problem (VRP), is a relevant supply-chain engineering task for construction management with various formulations and solving methods. This problem can range from a simple scenario involving one source, one material and one destination to a more challenging and complex case involving multiple sources, multiple materials and multiple destinations. This paper presents an Internet of Things (IoT)-supported active building information modeling (BIM) system for optimized multi-project ready-mix concrete (RMC) delivery.

The presented system is BIM-based, IoT supported, dynamic and automatic input/output exchange to provide an optimal delivery program for multi-project ready-mix-concrete problem. The input parameters are extracted as real-time map-supported IoT data and transferred to the system via an application programming interface (API) into a mixed-integer linear programming (MILP) optimization model developed to perform the optimization. The obtained optimization results are further integrated into BIM by conventional project management tools. To demonstrate the features of the suggested system, an RMCDP example was applied to solve that included four building sites, seven eligible concrete plants and three necessary RMC mixtures.

The system provides the optimum delivery schedule for multiple RMCs to multiple construction sites, as well as the optimum RMC quantities to be delivered, the quantities from each concrete plant that must be supplied, the best delivery routes, the optimum execution times for each construction site, and the total minimal costs, while also assuring the dynamic transfer of the optimized results back into the portfolio of multiple BIM projects. The system can generate as many solutions as needed by updating the real-time input parameters in terms of change of the routes, unit prices and availability of concrete plants.

The suggested system allows dynamic adjustments during the optimization process, andis adaptable to changes in input data also considering the real-time input data. The system is based on spreadsheets, which are widely used and common tool that most stakeholders already utilize daily, while also providing the possibility to apply a more specialized tool. Based on this, the RMCDP can be solved using both conventional and advanced optimization software, enabling the system to handle even large-scale tasks as necessary.

Visual aesthetics are a vital aspect of environmental quality. The objective of this study is to demonstrate the implementation of visibility analysis and visual quality standards on a campus to enhance productivity and effectiveness.

This study has identified the most crucial and valuable metrics for evaluating the visual quality of open spaces through an analysis of theoretical foundations and relevant background information. To achieve research goal, a multi-method approach was employed, incorporating a survey, user satisfaction ratings and ISOVIST simulation techniques. Specifically, this study focused on assessing the quality of open spaces in three open areas located on the campus of the Iran University of Science and Technology.

Based on the study’s findings, the most significant factors that students considered when evaluating the visual quality of open spaces on the Iran University of Science and Technology campus were green areas, gathering spaces and architectural elements such as furniture, color and texture. Among the three open areas examined, “Open Space One” was identified as the most satisfactory location for students. According to the study, “sensory richness,” “complexity” and “mystery” were significant indicators of students' satisfaction in this area. This area also had the widest radius and field of view feasible, which gave it a feeling of openness and spaciousness.

This study explores the influence of students' experiences, behavioral patterns and visual analyses on their use of open spaces on university campuses, with a focus on the Iran University of Science and Technology. By assessing students' satisfaction levels with these spaces, this research provides valuable insights that can guide the initial analysis stage before the design process and facilitate design optimization during the development stages. The results highlight the importance of considering user experiences and visual analysis when planning and creating open spaces on university campuses.

Highlights

1. Conducting an initial analysis before developing a design plan can be very helpful in understanding how users think and behave.

2. The three criteria of visual quality that have the strongest correlation with students' satisfaction with “open space” are “mystery,” “sensory richness” and “complexity.”

3. Two factors, namely the “radius of vision” and the “area” index, significantly influence students' satisfaction with open spaces.

4. Outdoor designers should incorporate “green space” and “gathering spaces” into their designs since the presence of these is effective in attracting and satisfying students.

5. The number of people using an open space has little to do with how satisfied students are with it.

6. Half of the students use open areas between 11:00 and 14:00, so the provision of “canopy” and “shelter” in these spaces is essential.

Conducting an initial analysis before developing a design plan can be very helpful in understanding how users think and behave.

The three criteria of visual quality that have the strongest correlation with students' satisfaction with “open space” are “mystery,” “sensory richness” and “complexity.”

Two factors, namely the “radius of vision” and the “area” index, significantly influence students' satisfaction with open spaces.

Outdoor designers should incorporate “green space” and “gathering spaces” into their designs since the presence of these is effective in attracting and satisfying students.

The number of people using an open space has little to do with how satisfied students are with it.

Half of the students use open areas between 11:00 and 14:00, so the provision of “canopy” and “shelter” in these spaces is essential.

The purpose of this research is to identify quick, effective and affordable architectural design solutions to improve the health of patients, visitors and staff, in an underfunded community healthcare center (CHC) in Baltimore.

Both qualitative (individual and Focus group interviews) and quantitative methods (space syntax analysis and questionnaire survey) are used to assess the healing environment. The questionnaires cover interior and exterior environment related questions.

The questionnaire identifies three issues related to wayfinding, interior design, and access to natural light. The findings demonstrate that the waiting area, exam room and laboratory need to be upgraded. Incorporation of some other interior components including, wall art, plants, music, signage are also suggested by the respondents.

Very few studies in the USA have been done to understand the effects of architectural design to create a healing environment on the community scale.

Aries Agro, an agribusiness firm, faced two prime challenges – the safety and productivity of its workers. When traditional software systems fell short of addressing these challenges, the firm contemplated the implementation of an IoT (Internet of things) based solution. This IoT based solution captures the movement of workmen and generates data from the sensors that help identify sources of inefficiency. In this case, we not only discuss the implementation challenges of an IoT based implementation but also how this solution can help to promote safety among the workmen and improve worker productivity by optimising facility layout.

This research investigates the impact of the COVID-19 pandemic on the use of transitional spaces in a Korean academic setting, to assess the impact of the pandemic on users' utilization of transitional spaces and evaluate any changes in their usage patterns. The research explores whether transitional spaces can function as social interactive spaces, aligning with Ray Oldenburg's “third-place” theory. The focus is on South Korean academic settings, aiming to create neutral and safe zones for users.

The adopted methodology involves reviewing the literature and employing design charrette as a major data collection tool. The design charrette provided a platform for users to share insights on current transitional spaces during the pandemic and envision these spaces as future social and interactive spaces.

The design charrette participants advocated for modifying the current transitional space design to transform these spaces into shared spaces for both visitors and regular users in the future. Restricting access for external users to the main building area until necessary. The significance of site amenities in determining transitional spaces as “third-places” was emphasized. While the nature of the building, its location and transitional space amenities are crucial aspects to consider, designers may prioritize user opinions and preferences, as the success or failure of the design ultimately centers on user behaviors.

The research focused on a specific university, hindered by limited access to other institutions during the pandemic. Restrictions on external users discouraged entry without proper permission, which was challenging to obtain. The conventional design charrette outlined in the research method was impossible due to pandemic-related limitations on gathering participants in one location. Therefore, the researcher modified the design charrette method to align with strict social distancing measures.

The results of the research are not limited to academic settings, but they can be implied in other environments where social interaction spaces are required and where there is a constant flow of visitors and regular users. The design charrette can be used as a methodology for interior spaces along with large-scale projects of urban planning.

The research analyzed transitional spaces during the pandemic, suggesting redesign to serve and act as buffer zones between private and public areas and become a common social gathering place for visitors and regular users within the built environment.

The present environmental concern has enforced manufacturing firms to re-evaluate their business practices to reduce the adverse impact on the environment with optimum production. Therefore, the present study aims to deal with the implementation of the environmental lean six sigma (ELSS) framework in an Indian medical equipment manufacturing industry to obtain operational and environmental sustainability.

The proposed ELSS framework is based on the DMAIC (Define–Measure–Analyze–Improve–Control) methodology, sustainability and lean tools. The efficacy of the developed framework is tested through a case study in an Indian medical equipment manufacturing unit.

In the case company, four major issues were reported, i.e. improper material handling, non-productive movement of men and material, poor indoor air quality and rework. The ELSS project facilitates the case organization to enhance their capacity utilization from 59.25% to 74.3%, defects per million opportunities reduce from 309,523 to 48,951.44 and indoor air quality levels decrease from 156.87 to 86.85 µgm3.

The efficacy of the developed ELSS framework is evaluated through a case study conducted only in one Indian manufacturing environment.

The present study facilitates industrial managers and practitioners to achieve sustainability and process excellence through ELSS implementation. Organizations that intend to simultaneously improve operational and environmental performance can benefit from this paper as it can be used as a guide to conduct similar projects with both operational and environmental benefits.

This paper presents a successful implementation of the ELSS framework in the healthcare industry to achieve operational and environmental sustainability.

The objective of this study is to investigate the barriers hindering the integration of lean manufacturing (LM) practices within the furniture industry of Bangladesh. The traditional operational paradigms in this sector have posed substantial challenges to the effective implementation of LM. In this study, the barriers of implementing LM in the furniture business are examined, aiming to provide a systematic understanding of the barriers that must be addressed for a successful transition.

The research reveals that “Fragmented Industry Structure,” “Resistance to Lean Practices” and “Inadequate Plant Layout and Maintenance”, emerged as the foremost barriers to LM implementation in the furniture industry. Additionally, “Insufficient Expert Management,” “Limited Technical Resources” and “Lack of Capital Investment” play significant roles.

The outcomes of this study provide valuable insights into the furniture industry, enabling the development of strategies for effective LM implementation. One notable challenge in lean implementation is the tendency to revert to established practices when confronted with barriers. Therefore, this transition necessitates informed guidance and leadership. In addition to addressing these internal challenges, the scope of lean implementation should be broadened.

This study represents one of the initial efforts to systematically identify and assess the barriers to LM implementation within the furniture industry of Bangladesh, contributing to the emerging body of knowledge in this area.

This paper aims to propose a generative design method combined with meta-heuristic algorithm for automating and optimizing the floor layout of modular buildings using typical standardized module units, which are the room module, the corridor module and the stair module.

The integrated framework involves the generative design method and optimization for modular construction. The generative rules are provided by geometric relationships and functionalities of the module units. An evaluation function of the generated floor plans is also presented by the combination of project cost and cost penalties for the geometric features. The multi-population genetic algorithm (MPGA) method is provided for the optimization of the combination of costs.

The proposed MPGA method is demonstrated fast and efficient at discovering the globally optimal solution. The results indicate that when the unit price of modules is high, the transportation distance is long, or the land cost is high, the layout cost, which related to the symmetry, the compactness and the energy is tend to be lower, making the optimal layout economical.

This paper presented an integrated framework of generative floor layout and optimization for modular construction by using typical module units. It fulfills the need for automated layout generation with repetitive units and corresponding assessment during the early design stage.