Search results

The purpose of this paper is to compile a comprehensive status report on pipes/piping networks across different industrial sectors, along with specifications of materials and sizes, and showcase welding avenues. It further extends to highlight the promising friction stir welding as a single solid-state pipe welding procedure. This paper will enable all piping, welding and friction stir welding stakeholders to identify scope for their engagement in a single window.

The paper is a review paper, and it is mainly structured around sections on materials, sizes and standards for pipes in different sectors and the current welding practice for joining pipe and pipe connections; on the process and principle of friction stir welding (FSW) for pipes; identification of main welding process parameters for the FSW of pipes; effects of process parameters; and a well-carved-out concluding summary.

A well-carved-out concluding summary of extracts from thoroughly studied research is presented in a structured way in which the avenues for the engagement of FSW are identified.

The implications of the research are far-reaching. The FSW is currently expanding very fast in the welding of flat surfaces and has evolved into a vast number of variants because of its advantages and versatility. The application of FSW is coming up late but catching up fast, and as a late starter, the outcomes of such a review paper may support stake holders to expand the application of this process from pipe welding to pipe manufacturing, cladding and other high-end applications. Because the process is inherently inclined towards automation, its throughput rate is high and it does not need any consumables, the ultimate benefit can be passed on to the industry in terms of financial gains.

To the best of the authors’ knowledge, this is the only review exclusively for the friction stir welding of pipes with a well-organized piping specification detailed about industrial sectors. The current pipe welding practice in each sector has been presented, and the avenues for engaging FSW have been highlighted. The FSW pipe process parameters are characteristically distinguished from the conventional FSW, and the effects of the process parameters have been presented. The summary is concise yet comprehensive and organized in a structured manner.

This paper aims to present the approximate limit pressure solutions for thin-walled shape-imperfect 90° pipe bends. Limit pressure was determined by finite element (FE) limit analysis with the consideration of small geometry change effects.

The limit pressure of 90° pipe bends with ovality and thinning has been evaluated by geometric linear FE approach. Internal pressure was applied to the inner surface of the FE pipe bend models. When von-Mises stress equals or just exceeds the yield strength of the material, the corresponding pressure was considered as the limit pressure for all models. The current FE methodology was evaluated by the theoretical solution which has been published in the literature.

Ovality and thinning produced a significant effect on thin-walled pipe bends. The ovality weakened pipe bend performance at any constant thinning, while thinning improved the performance of the bend portion at any constant ovality. The limit pressure of pipe bends under internal pressure increased with an increase in the bend ratio and decreased with an increase in the pipe ratio. With a simultaneous increment in bend radius and reduction in wall thickness, there was a reduction in limit pressure. A new closed-form empirical solution was proposed to evaluate limit pressure, which was validated with published experimental data.

The influences of structural deformation (ovality and thinning) in the limit pressure analysis of 90° pipe bends have not been investigated and reported.

The purpose of this study is to solve the problem of healthcare waste management in developing countries. The buildup of medical waste has attracted the attention of all spheres of society due to the expanding population and developing economy. Timely collection and processing of medical waste are extremely important due to its potential hazards. Although the problem of planning medical waste management has been addressed in developed countries, it persists in several developing countries. This research is motivated by an example of a city in India characterized by a dense population, abundant health-care facilities and a lack of planning for managing large medical waste generated daily.

The authors address the problem of designing the network of collection and processing facilities for medical waste and optimizing the vehicle route that collects and transfers the waste between facilities. Due to distinct topographic restrictions in the considered city, the collection and transfer process needs to be conducted in two echelons – from hospitals to collection centers using smaller vehicles and then to the processing facilities using trucks. This work addresses these two problems as a two-echelon location-routing problem.

A mixed-integer programming model is developed to minimize the cost of opening the facilities and transporting medical waste. Several managerial insights are drawn up to assist planners and decision-makers.

This study follows a case study approach to provide a descriptive and prescriptive approach to hospital waste management in the ancient city of Varanasi. The city has witnessed unplanned growth over the years and is densely populated. The health-care facilities in the city have a large catchment area and attract patients from neighboring districts. The situation analysis based on secondary data and unstructured interviews of the stakeholders suggests that the ad hoc approach prevails in present hospital waste management in the city.

The research focused on analysing a unique type of heat exchanger that uses swirling air flow over heated tubes. This heat exchanger includes a round baffle plate with holes and opposite-oriented trapezoidal air deflectors attached at different angles. The deflectors are spaced at various distances, and the tubes are arranged in a circular pattern while maintaining a constant heat flux.

This setup is housed inside a circular duct with airflow in the longitudinal direction. The study examined the impact of different inclination angles and pitch ratios on the performance of the heat exchanger within a specific range of Reynolds numbers.

The findings revealed that the angle of inclination significantly affected the flow velocity, with higher angles resulting in increased velocity. The heat transfer performance was best at lower inclination angles and pitch ratios. Flow resistance decreased with increasing angle of inclination and pitch ratio.

The average thermal enhancement factor decreased with higher inclination angles, with the maximum value observed as 0.94 at a pitch ratio of 1 at an angle of 30°.

The purpose of this study is to advance turbulent thermal convection inside the constant heat-flux round tube inserted by multiple perforated twisted tapes.

The novel design of this study is accomplished by inserting several twisted tapes and drilling some circular perforations near the tape edge (C1, C3, C5: solid tapes; C2, C4, C6: perforated tapes). The turbulence flow appearances and thermal convective features are examined for various Reynolds numbers (8,000–14,000) using the renormalization group (RNG) κ−ε turbulent model and Semi-Implicit Method for Pressure-Linked Equations (SIMPLE) algorithm.

The simulated outcomes reveal that inserting more perforated-twisted tapes into the heated round tube promotes turbulent thermal convection effectively. A swirling flow caused by the twisted tapes to produce the secondary flow jets between two reverse-spin tapes can combine with the main flow passing through the perforations at the outer edge to enhance the vortex flow. The primary factors are the quantity of twisted tapes and with/without perforations, as the perforation ratio remains at 2.5 in this numerical work. Weighing friction along the tube, C6 (four reverse-spin perforated-twisted tapes) brings the uppermost thermal-hydraulic performance of 1.23 under Re = 8,000.

The constant thermo-hydraulic attributes of liquid water and the steady Newtonian fluid are research limitations for this simulated work.

The simulated outcomes will avail the inner-pipe design of a heat exchanger inserted by multiple perforated twisted tapes to enhance superior heat transfer.

These twisted tapes form tiny circular perforations along the tape edge to introduce the fluid flow through these bores and combine with the secondary flow induced between two reverse-spin tapes. This scheme enhances the swirling flow, turbulence intensity and fluid mixing to advance thermal convection since larger perforations cannot produce large jet velocity or the position of perforations is too far from the tape edge to generate a separated flow. Consequently, this work contributes a valuable cooling mechanism toward thermal engineering.

This paper aims at studying numerically the entropy generation of nanofluid flowing over an inclined sheet in the presence of external magnetic field, heat source/sink, chemical reaction along with slip boundary conditions imposed on an impermeable wall.

A suitable similarity transformation technique has been used to convert the coupled nonlinear partial differential equations to ordinary differential equations (ODEs). The ODEs are then solved simultaneously using the finite difference method implemented through an in-house computer program. The effects of different controlling parameters such as magnetic parameter, radiation parameter, Brownian motion parameter, thermophoresis parameter, chemical reaction parameter, Reynolds number, Brinkmann number, Prandtl number, velocity slip parameter, temperature slip parameter and the concentration slip parameter on the entropy generation and Bejan number have been discussed comprehensively through the relevant physical insights for the first time.

The relative strengths of the irreversibilities due to heat transfer, fluid friction and the mass diffusion arising due to the change in each of the controlling variables have been delineated both in the near-wall and far-away-wall regions, which may be helpful for a better understanding of the thermo-fluid dynamics of nanofluid in boundary layer flows. The numerical results obtained from the present study have also been validated with results published in open literature.

The effects of different controlling parameters such as magnetic parameter, radiation parameter, Brownian motion parameter, thermophoresis parameter, chemical reaction parameter, Reynolds number, Brinkmann number, Prandtl number, velocity slip parameter, temperature slip parameter and the concentration slip parameter on the entropy generation and Bejan number have been discussed comprehensively through the relevant physical insights for the first time.

Cryptocurrency arose, and grew in popularity, following the financial crisis of 2008 built upon a promise of decentralizing money and payments. An examination of the history of money and banking in the United States demonstrates that stable money benefits from strict controls and commitments by a centralized government through chartering restrictions and a broad safety net, rather than decentralization. In addition, financial crises happen when the government allows money creation to occur outside of official channels. The US central bank is then forced into a policy of supporting a range of money-like assets in order to maintain a grip on monetary policy and some semblance of financial stability.

In addition, this chapter argues that cryptocurrency as a form of shadow money shares many of the problematic attributes of both the privately issued bank notes that created instability during the “free banking” era and the “shadow banking” activities that contributed to the 2008 crisis. In this sense, rather than being a novel and disruptive idea, cryptocurrency replicates many of the systemically destabilizing aspects of privately issued money and money-like instruments.

This chapter proposes that, rather than allowing a new, digital “free banking” era to emerge, there are better alternatives. Specifically, it argues that the Federal Reserve (Fed) should use its tools to improve public payment systems, enact robust utility-like regulations for private digital currencies and limit the likelihood of bubbles using prudential measures.

The use of continuous fiber-reinforced filaments improves the mechanical properties obtained with the fused filament fabrication (FFF) process. Yet, there is a lack of simulation tailored tools to assist in the design for additive manufacturing of continuous fiber composites. To build such models, a precise elastic model is required. As the porosity caused by interbead voids remains an important flaw of the process, this paper aims to build an elastic model integrating this aspect.

To study the amount of porosity, which could be a failure initiator, this study proposes a two step periodic homogenization method. The first step concerns the microscopic scale with a unit cell made of fiber and matrix. The second step is at the mesoscopic scale and combines the elastic material of the first step with the interbead voids. The void content has been set as a parameter of the model. The material models predicted with the periodic homogenization were compared with experimental results.

The comparison between periodic homogenization results and tensile test results shows a fair agreement between the experimental results and that of the numerical simulation, whatever the fibers’ orientations are. Moreover, a void content reduction has been observed by increasing the crossing angle from one layer to another. An empiric law giving the porosity according to this crossing angle was created. The model and the law can be further used for design evaluation and optimization of continuous fiber-reinforced FFF.

A new elastic model considering interbead voids and its variation with the crossing angle of the fibers has been built. It can be used in simulation tools to design high performance fused filament fabricated composite parts.

The initial observation of this study is the gap of research in the economic application of data spaces in wholesale. With the lowering threshold in using digital technology in innovative services wholesale is confronted with new competition in their main business – the purchase and sale of products in large numbers. Wholesale must advance in their own business creating new digital services for their customers to stay relevant competitors in their markets.

The design follows an explorative, heuristic and interdisciplinary approach (social sciences and in-formation systems) of a multiple case study combining semi-structured, open and participating observation in three case studies. The cases were set in tourism, construction, as well as manufacturing and were each scientifically accompanied for more than one year during the identification of implementation of strategies for data spaces as digital entrepreneurial path.

The study shows four strategies in the implementation of data spaces in traditional wholesale. These data spaces have their focus in (1) the traded commodity with two specificities (1a and 1b), (2) the customer and (3) the cooperation of an ecosystem of companies. Each have their own challenges, chances and specifications like the data sovereignty. These strategies are embedded in the behavior of digital entrepreneurship.

This study accompanied and observed the entrepreneurial strategies of three wholesalers discovering new opportunities enabled via data spaces. These three strategies follow different approaches offering potentials for other wholesalers.