Search results

Au stud bump bonding technology is an effective means to realize heterogeneous integration of commercial chips in the 2.5D electronic packaging. The purpose of this paper is to study the long-term reliability of the Au stud bump treated by four different high temperature storage times (200°C for 0, 100, 200 and 300 h).

The bonding strength and the fracture behavior are investigated by chip shear test. The experiment is further studied by microstructural characterization approaches such as scanning electron microscope, energy dispersive spectrometer and so on.

It is recognized that there were mainly three typical fracture models during the chip shear test among all the Au stud bump samples treated by high temperature storage. For solder bump before aging, the fracture occurred at the interface between the Cu pad and the Au stud bump. As the aging time increased, the fracture mainly occurred inside the Au stud bump at 200°C for 100 and 200 h. When aging time increased to 300 h, it is found that the fracture transferred to the interface between the Au stud bump and the Al Pad.

In addition, the bonding strength also changed with the high temperature storage time increasing. The bonding strength does not change linearly with the high temperature storage time increasing but decreases first and then increases. The investigation shows that the formation of the intermetallic compounds because of the reaction between the Au and Al atoms plays a key role on the bonding strength and fracture behavior variation.

This study aims to address the critical need for innovative financing solutions in the global housing sector, focusing specifically on Malaysia’s distinct housing finance system encompassing both conventional and Islamic loans. The primary objective is to develop a transformative housing finance model that addresses affordability challenges and reshapes the Malaysian housing landscape.

The study presents an alternate housing finance model for Malaysia, integrating lower monthly payments and reduced household debt. Key variables include house price appreciation rates, interest rates, initial guarantee fees and loan-to-value ratios. Inspired by the Help to Buy (HTB) scheme, the model aligns with proven global initiatives for enhanced affordability, balancing payment amounts, loan interest rates and acceptable price thresholds.

The study’s findings promise to address affordability disparities and reshape Malaysia’s housing finance landscape. The emphasis is on introducing a structured repayment plan that offers a sustainable path to homeownership, particularly for low-income families. Incorporating the future value adaptation concept, inspired by reverse mortgages and Islamic finance, enhances adaptability, ensuring long-term sustainability despite economic shifts.

The proposed model promotes widespread access to homeownership, offering practical solutions for policymakers to improve affordability, prompting adaptable risk management strategies for financial institutions and empowering potential homebuyers with increased flexibility.

The study introduces a transformative housing finance model for Malaysia, merging elements from reverse mortgages, Islamic finance and the HTB scheme, offering potential applicability to similar systems globally.

This review aims to give a critical view of the wheel/rail high frequency vibration-induced vibration fatigue in railway bogie.

Vibration fatigue of railway bogie arising from the wheel/rail high frequency vibration has become the main concern of railway operators. Previous reviews usually focused on the formation mechanism of wheel/rail high frequency vibration. This paper thus gives a critical review of the vibration fatigue of railway bogie owing to the short-pitch irregularities-induced high frequency vibration, including a brief introduction of short-pitch irregularities, associated high frequency vibration in railway bogie, typical vibration fatigue failure cases of railway bogie and methodologies used for the assessment of vibration fatigue and research gaps.

The results showed that the resulting excitation frequencies of short-pitch irregularity vary substantially due to different track types and formation mechanisms. The axle box-mounted components are much more vulnerable to vibration fatigue compared with other components. The wheel polygonal wear and rail corrugation-induced high frequency vibration is the main driving force of fatigue failure, and the fatigue crack usually initiates from the defect of the weld seam. Vibration spectrum for attachments of railway bogie defined in the standard underestimates the vibration level arising from the short-pitch irregularities. The current investigations on vibration fatigue mainly focus on the methods to improve the accuracy of fatigue damage assessment, and a systematical design method for vibration fatigue remains a huge gap to improve the survival probability when the rail vehicle is subjected to vibration fatigue.

The research can facilitate the development of a new methodology to improve the fatigue life of railway vehicles when subjected to wheel/rail high frequency vibration.

Drawing on the challenge–hindrance stressor framework and the “too-much-of-a-good-thing” principle, this study examined the curvilinear effects of two emic social challenge stressors (guanxi beliefs and participative decision-making (PDM)) and the moderating effect of an etic social hindrance stressor (perceived organizational politics) on Hong Kong and United States nurses’ job satisfaction.

A quantitative survey method was implemented, with the data provided by 355 Hong Kong nurses and 116 United States nurses. Structural equation modeling was used to examine the degree of measurement equivalence across Hong Kong and US nurses. The proposed model and the research questions were tested using nonlinear structural equation modeling analyses.

The results show that while guanxi beliefs only showed an inverted U-shaped relation on Hong Kong nurses’ job satisfaction, PDM had an inverted U-shaped relation with both Hong Kong and United States nurses’ job satisfaction. The authors also found that Hong Kong nurses experienced the highest job satisfaction when their guanxi beliefs and perceived organization politics were both high.

The results add to the comprehension of the nuances of the often-held assumption of linearity in organizational sciences and support the speculation of social stressors-outcomes linkages.

Managers need to recognize that while the nurturing and development of effective relationships with employees via social interaction are important, managers also need to be aware that too much guanxi and PDM may lead employees to feel overwhelmed with expectations of reciprocity and reconciliation to such an extent that they suffer adverse outcomes and become dissatisfied with their jobs.

First, the authors found that influences of guanxi beliefs and PDM are not purely linear and that previous research may have neglected the curvilinear nature of their influences on job satisfaction. Second, the authors echo researchers’ call to consider an organization’s political context to fully understand employees’ attitudes and reactions toward social interactions at work. Third, the authors examine boundary conditions of curvilinear relationships to understand the delicate dynamics.

Based on conservation of resources (COR) theory, this study aims to examine the impact of daily illegitimate tasks on employees' daily silence and daily voice behavior, as well as the mediating role of daily ego depletion and the moderating role of trait mindfulness.

Through daily diary approach, 81 employees were followed for 10 consecutive workdays. Multilevel analysis was employed to examine the hypothesized relationships.

The results showed that daily illegitimate tasks are positively related to daily silence behavior and negatively related to daily voice behavior; daily ego depletion plays a mediating role in these relationships. Trait mindfulness moderates the effect of daily illegitimate tasks on daily ego depletion and the indirect effect of daily illegitimate tasks on daily silence and daily voice.

Managers should be mindful of minimizing the assignment of illegitimate tasks. Additionally, it is recommended that the organization provide training courses for employees to help them reduce ego depletion. Finally, organizations should focus on fostering high levels of mindfulness among their employees.

This study contributes to the existing literature by investigating the immediate impact of illegitimate tasks on employee voice and silence at within-person level. By doing so, it enhances comprehension of the consequences associated with illegitimate tasks. Meanwhile, this study offers additional insights into the underlying mechanisms and boundary conditions of the effect of illegitimate tasks from a resource perspective.

Online health communities (OHCs) have been recognized as emerging platforms on the Internet used for health purposes. Despite its emergence, developing a successful OHC is still a challenge. Prior studies identified that value co-creation behavior (VCB) of members is an essential factor for sustaining OHCs; however, little is known about how members’ behavior drives to co-create value? Therefore, this study aims to discover the inclusive mechanism for members’ VCB in OHCs.

The authors develop the study model and hypothesis based on the service-dominant logic of value co-creation theory and social support (SS) literature. The survey data of 608 active OHCs users in China were analyzed using partial least squares structural equation modeling (PLS-SEM).

The results revealed that SS positively affects members’ VCBs. Ethical aspects; Trust and ethical interaction (EI) partially mediate their relationships. In addition, community members’ current health status (CHS) negatively moderates the relationships between SS and VCB. From the findings, it becomes evident that only SS is not enough; developing an ethical environment in OHCs, i.e. trust and ethically rich interactions among members, significantly helps OHCs to promote co-creation. Also, the negative moderation of CHS findings provides novel insights when cramming health conditions.

Exploring the complex mechanism of co-creation in OHC, the authors illustrate the potential of service-dominant logic to create new theoretical insight for healthcare and provide the framework of co-creation with ethics for the first time. This will extend the application of ethics in healthcare services and offer a robust platform from which the understanding of drivers of members’ VCB can be advanced in the OHC context.

The purpose of this paper is to examine the hard and soft measures of service quality and visitors' satisfaction, which ultimately contribute to visitor loyalty to the destination, specifically in the context of the Borneo Cultural Festival (BCF) in Sibu, Sarawak (Malaysia).

The study uses a quantitative research approach with 427 valid responses from domestic and international tourists of BCF and employs the cognitive-affective-conative theory to examine how the festival impacts visitor loyalty.

The findings indicate that both hard and soft measures significantly contribute to the service quality and visitor satisfaction at the BCF. Additionally, service quality and visitor satisfaction were found to positively influence destination loyalty, while the relationship between legibility and visitor satisfaction was not significant.

The findings encourage the ministry and event organisers to adopt a destination event strategy that positions Sibu as an attractive event destination capable of attracting domestic and international tourists.

The findings of this study contribute to the existing body of knowledge on event tourism and destination loyalty by applying the cognitive-affective-conative theory. This study marks the first of its kind, analysing both the tangible (hard) and intangible (soft) measures of service quality and their impact on visitor satisfaction, ultimately influencing visitor loyalty to the destination, particularly in the context of the BCF in Sibu, Sarawak.

This study investigates the relationship between corporate social responsibility (CSR) and financial performance of the banking sector from the prospective of emerging countries.

This study obtained balance sheet and income statement data for 173 banks in 20 emerging countries from the Bankscope database from 2005–2018. The CSR-related data were taken from the Thomson Reuters ASSET4 database. Moreover, macroeconomic controls such as GDP per capita, inflation, and financial development are attained from the GFDD. The series of institutional quality indices (Political Stability, Rule of Law, Control of Corruption, Government Effectiveness, and Regulatory Quality) is obtained from the WGI. At the same time, national culture and bank regulation are attained from Hofstede Insights and Barth et al. (2013). We used the panel fixed-effects model in our baseline estimations, while 2SLS and GMM were applied to control for endogeneity.

The finding shows that CSR activities significantly improve bank performance, but the effect varies across the bank. Only environmentally friendly activities have shown a significant positive relationship with banking performance for CSR dimensions. However, the social and government dimensions did not significantly affect bank performance. Moreover, a sound institutional and regulatory environment and national norms play an important role in the nexus of CSR activities and bank performance.

This study provides empirical evidence that sheds light on CSR and bank performance in an emerging market context.

This study examines the impact of university science parks’ (USPs) capabilities on revenue generation and introduces regional innovation as a moderating variable. This study aims to provide insights into enhancing revenue generation and fully leveraging the role of USPs in promoting revenue generation.

This study employs system generalized method of moments (GMM) estimation for 116 universities in China from 2008 to 2020, using hierarchical regression analysis to examine the relationships between variables.

The findings suggest that USPs play a beneficial role in fostering revenue generation. Specifically, the provision of incubation funding demonstrates a positive correlation, while USPs size exhibits an inverted U-shaped pattern, with a threshold at 3.037 and a mean value of 3.712, highlighting the prevalent issue of suboptimal personnel allocation in the majority of USPs. Moreover, the analysis underscores the critical moderating influence of regional innovation, affecting the intricate interplay between USPs size, incubation funding and revenue generation.

The single country (China) analysis relied solely on the use of secondary data. Future studies could expand the scope to include other countries and employ primary data collection. For instance, future research can further examine how regional development and USPs strategic plan impact revenue generation.

The study recommends that USPs managers and policymakers recognize the importance of incubation funding and determine the optimal quantity of USPs size to effectively foster revenue generation in USPs. Policymakers can use regional innovation as a moderating variable to reinforce the relationship between USPs size and incubation funding on revenue generation.

The study’s findings can contribute to the strategic industry growth and economic development of nations by promoting revenue generation. Leveraging the role of USPs and implementing the study’s recommendations can strengthen innovation and technology capabilities, driving strategic industry growth and economic development. This can enhance global competitiveness and promote sustainable economic growth.

This study introduces regional innovation as a moderating variable and provides empirical evidence of its influence on the relationship between USPs size and incubation funding on revenue generation. This adds value to research to the existing literature on USPs and revenue generation by showcasing the importance of examining the regional impact in research and innovation.

The occupational health risk associated with the production of prefabricated concrete components is often overlooked. This paper will use a damage assessment and cyclic mitigation (DACM) model to provide individualized exposure risk assessment and corresponding mitigation management measures for workers who are being exposed.

The DACM model is proposed based on the concept of life cycle assessment (LCA). The model uses Monte-Carlo simulation for uncertainty risk assessment, followed by quantitative damage assessment using disability-adjusted life year (DALY). Lastly, sensitivity analysis is used to identify the parameters with the greatest impact on health risks.

The results show that the dust concentration is centered around the mean, and the fitting results are close to normal distribution, so the mean value can be used to carry out the calculation of risk. However, calculations using the DACM model revealed that there are still some work areas at risk. DALY damage is most severe in concrete production area. Meanwhile, the inhalation rate (IR), exposure duration (ED), exposure frequency (EF) and average exposure time (AT) showed greater impacts based on the sensitivity analysis.

Based on the comparison, the DACM model can determine that the potential occupational health risk of prefabricated concrete component (PC) factory and the risk is less than that of on-site construction. It synthesizes field research and simulation to form the entire assessment process into a case-base system with the depth of the cycle, which allows the model to be continuously adjusted to reduce the occupational health damage caused by production pollution exposure.