Search results

Lean construction (LC) is an innovative approach in the construction industry that has shown significant success in developed countries. Although LC has potential in the construction sector of Pakistan, it has not been extensively explored. This study aims to address this knowledge gap by identifying and predicting current lean practices and assessing the strengths and weaknesses of LC implementation in Pakistan.

Using robust statistical methods to analyze 92 valid responses, the study reveals that approximately 54% of lean practices are currently in use in the construction industry of Pakistan, with a population mean ranging from 52.7% to 55.6%.

Surprisingly, the research identifies instances where some construction firms in Pakistan are implementing LC practices, even though they have only a limited understanding of its underlying principles. Notably, certain subprinciples, such as visual management, top management commitment to change, employee training, process cycle time reduction and production optimization, are less integrated within the construction industry. Exploring the possibility of implementing LC, recommendations for strategies to implement LC in Pakistan are suggested, aligning with the conceptual model proposed by the researchers.

The novelty of this work offers insights that can serve as a comprehensive guide for developing nations. It provides a structured approach to assess and benchmark LC practices, which, in turn, can contribute to a more efficient and effective construction industry. Moreover, the strategies proposed in this research can aid developing countries in the efficient implementation of LC. This will have a positive implication for both economic and developmental outcomes.

Problems such as information asymmetry and a lack of trust among construction practitioners damage the quality and progress of construction projects. The decentralization, transparency, traceability and temper-proof nature of blockchain technology (BCT) can provide solutions and facilitate multiparty cooperation. However, BCT acceptance in the construction industry is relatively low, and there are few pilot projects adopting BCT. Most relevant literature focuses on BCT acceptance at the industry and organizational levels, but the impact of non-managerial practitioners executing BCT or the traditional approach in day-to-day work tends to be disregarded. This study aims to establish a theoretical model of BCT acceptance, identify key influencing factors and paths of behavioral intention to adopt BCT and promote strategies to enhance BCT adoption.

A new BCT acceptance model for construction practitioners was proposed. A survey was performed with 203 construction practitioners in Shenzhen, China and post-survey interviews were conducted with four BCT experts for validation. Covariance-based structural equation modeling was used to examine the influence paths and moderating effect analysis was performed to check practitioners’ differential perceptions.

Performance expectancy, social influence, facilitating conditions and perceived behavioral control significantly and positively influence behavioral intention to accept BCT, while impacts from effort performance and risk are negative. Overcoming obstacles related to the effort required for BCT adoption and effective risk management will be essential to unlocking BCT’s transformative potential. Then, the moderating effects of respondents’ gender, degree and BCT knowledge as well as the project type involved were analyzed. Continued adoption of BCT in the construction industry has the potential to revolutionize project management, transparency and trust among stakeholders.

The findings of this research can help practitioners and government agencies understand crucial influencing factors and pathways of BCT acceptance. Targeted measures, such as increasing practitioners’ benefits and sense of BCT usefulness, conducting pilot projects and increasing publicity, were proposed for project leadership teams to enhance BCT adoption. This may lead to increased efficiency, reduced disputes and more streamlined and secure construction processes, ultimately enhancing the industry’s overall performance.

Few studies have explored BCT acceptance from the perspective of non-managerial construction practitioners. The BCT acceptance model proposed in this study is a novel adaptation of previous technology acceptance models, with new factors (risk and perceived behavioral control) and moderating variables (degree, BCT knowledge and project type) added for better understanding of non-managerial practitioners’ perceptions and differences.

This paper aims to explore virtual simulations, merging artificial intelligence with real-world simulations, supporting Canadian armed forces (CAF) junior military leaders (JMLs) leadership development. Our research questions are: (1) How do virtual simulations support CAF junior military leadership development within a globalized and complex environment in the 21st century? (2) Could virtual simulations support a leadership culture change through efficacious “soft skills” training? In this paper, we explore the efficacy of virtual simulations for enhancing or developing leadership in JMLs in the CAF through a four-day pilot project with twenty JMLs (n = 20).

To assess the efficacy of virtual simulations for leadership development, we designed and studied a four-day leadership workshop for JMLs in the CAF using several virtual artificial intelligence leadership role-play simulations developed by McGraw Hill in their smart book textbook (Manning & Curtis, 2022) and several non-virtual in-class simulations for comparison. We selected four twenty to thirty-minute virtual role-play simulations that synergized with the in-person morning leadership workshop. We facilitated the three-hour leadership workshops and virtual/in-class simulations over four consecutive days. We emulated the ELESS model (De Freitas & Routledge, 2013) to assess soft and leadership skills.

The participants (JMLs) reported beneficial learning utility associated with the virtual simulations. Participants also expressed that further utility might be leveraged through virtual simulations incorporating greater complexity with multiple potential outcomes. They also suggested that leadership simulations designed around military situations would prove highly beneficial, something that was outside of the scope of this small pilot project.

Since this phase of our research is a pilot project, we secured a small amount of funding to test our hypothesis that simulations enhance leadership development for JMLs. These funding limitations resulted in several constraints in the research, such as the availability of virtual simulations articulating leadership from a military perspective. However, we believed the assigned organizational leadership simulations in the McGraw Hill Smart Book ecosystem would approximate generic leadership situations enough to test the hypothesis with the JMLs. As a pilot project, our sample size was relatively small (n = 20 JMLs) since participation was voluntary amidst a busy spring season for the JMLs. Since this is a pilot project, we suggest that twenty JMLs are an adequate sampling to test the hypothesis that simulations enhance JML leadership development. We will expand the sample size in the next phase of our research as we work with the CAF to expand the pool of participants to at least forty JML participants (n = 40). We also plan to secure further funding to collaborate with subject matter experts to design virtual simulations based on Canadian military leadership scenarios.

The CAF host robust simulations capabilities for combat training, but have not exploited the potential training and analytical capacity of virtual leadership simulations for leadership development within the CAF. We believe that virtual simulations provide an opportunity for the CAF to effect desired culture change through leadership development that leverages the substantial pedagogical benefits of simulations.

The CAF encountered several detrimental leadership scandals that eroded the reputational capital of the CAF. In the current geo-political climate of an expanding North American Treaty Organization (NATO) and threats from several international actors, the CAF seeks to expand its capabilities by adding and enhancing its human capital. However, the CAF currently experiences a significant gap in its human capital aspirations. There is a unanimous consensus that the endemic traditional culture of the CAF, as expressed in the recent explosive leadership scandals, is a deterrent to recruitment and thus weakens the CAF’s capability. The CAF targets leadership development with new leadership paradigms as pivotal to culture change. The CAF suggests that by enhancing leadership development in the CAF the new cadre of leadership will change the culture of the CAF and thereby enhance the reputational capital of the CAF. It is believed that this rejuvenated culture will lead to greater recruitment and retention, leading to a strengthened military. A strengthened military is important to provide effective support and protection for the Canadian people in these volatile and uncertain times. This expanded capacity will enable the CAF to address external military threats more effectively and also the increasing operations other than war (OOTW), such as the military support of long-term care facilities during COVID-19 or the military’s support in fighting record wildfires and the military’s support in climate change related disasters such as flooding.

The satisfaction measures indicated by the participants are typical evaluative measures of leadership development (Noe, 2023). These satisfaction ratings do not, however, indicate whether training has produced a change in behaviour (Brown, 2022). The implications of these outcomes for leadership education are that role-player simulations are useful leadership education and development tools because they provide a theatre of practice in which mistakes are not detrimental and serve as learning moments (Moore, 2012; Piro and O’Callaghan, 2021; Riotto, 2021). Further, the importance of role-player simulations that closely approximate the sector where leadership is experienced and practiced is perceived to enhance the experience. While the CAF invest in combat related simulations, but leadership development simulations are not as evident in the training and development array. This study seeks to assess their potential value as a leadership development tool within the wider context of character development as a leadership competency.

A quantitative observational study was conducted. The purpose of this study is to examine the continuing adherence to the stopping over-medication of people with intellectual disability and/or autism guidelines for a cohort of outpatients seen in the outpatients’ clinics in the two teams who participated in this study to review the trend of psychotropic prescribing with a prescription indication along with the utilisation of non-pharmacological interventions.

Data was retrospectively collected over a period of one year for patients sampled conveniently in the outpatient’s clinic. The data was collected from two sites from psychiatric letters to the general practitioners (GPs), with the focus being psychotropic prescription indication and their adherence to British National Formulary limits, inclusion of a wider multi-disciplinary team or MDT (including nurses, psychologists and health support workers), use of Clinical Global Impression (CGI) scale for assessing medication side effects and response to treatment.

Most of the patients had at least one review in the previous six months. Antipsychotics were the highest prescribed medications without an indication for their use (13.3%) followed by anxiolytics and other medications. CGI recording was suboptimal, with 26% of the patient population did not have medication side effects and effectiveness monitored through this method. In total, 41% of patients were open to community nurses followed by other disciplines.

To the best of the authors’ knowledge, this is an original article following the pilot study completed by the authors.

The research objective of this paper is to investigate the direct and indirect impacts of green finance on agricultural carbon total factor productivity (ACTFP) within the framework of the carbon peaking and carbon neutrality (dual carbon) goals, while also identifying the driving factors through an exponential decomposition of ACTFP, aiming to provide policy recommendations to enhance financial support for low-carbon agricultural development.

In this paper, the Global Malmquist Luenberger (GML) Index method was employed to analyze and decompose the ACTFP, while the direct and spillover effects of China’s green finance pilot policy (GFPP) on ACTFP were assessed using the difference-in-differences (DID) method and the spatial differences-in-differences (SDID) method, respectively.

After the implementation of the GFPP, the ACTFP in the pilot area has experienced significant improvement, with the enhancement of technical efficiency serving as the main driving force. In addition, the GFPP exhibits a positive low-carbon spatial spillover effect, indicating it benefits ACTFP in both the pilot and adjacent areas.

Within the framework of the dual carbon goals, the paper highlights agriculture as a significant carbon emitter. ACTFP is assessed by considering the agricultural carbon emission factor as the sole non-desired output, and the impact of the GFPP on ACTFP is investigated through the DID method, thereby providing substantial validation of the hypotheses inferred from the mathematical model. Subsequently, the spillover effects of GFPP on ACTFP are analyzed in conjunction with the spatial econometric model.

This study aims to examine the effect of Industry 4.0 technology on resilience in established cross-border supply chain(s) (SC).

A literature review provides insight into the resilience capabilities of cross-border SC. The research uses a case study of operational international SC: the producers, importers, logistics companies and UK Government (UKG) departments. Semi-structured interviews determine the resilience capabilities and approaches of participants within cross-border SC and how implementing an Industry 4.0 Internet of Things (IoT) and capitals Distributed Ledger (blockchain) based technology platform changes SC resilience capabilities and approaches.

A blockchain-based platform introduces common assured data, reducing data duplication. When combined with IoT technology, the platform improves end-to-end SC visibility and information sharing. Industry 4.0 technology builds collaboration, trust, improved agility, adaptability and integration. It enables common resilience capabilities and approaches that reduce the de-coupling between government agencies and participants of cross-border SC.

The case study presents challenges specific to UKG’s customs border operations; research needs to be repeated in different contexts to confirm findings are generalisable.

Operational SC and UKG customs and excise departments must align their resilience strategies to gain full advantage of Industry 4.0 technologies.

Case study research shows how Industry 4.0 technology reduces the de-coupling between the SC and UKG, enhancing common resilience capabilities within established cross-border operations. Improved information sharing and SC visibility provided by IoT and blockchain technologies support the development of resilience in established cross-border SC and enhance interactions with UKG at the customs border.

The recent failures and insolvencies of organisations related to the modern methods of construction (MMC) have gained increased attention and controversy across the UK construction sector. Such failures are linked to their inability to achieve an economy of scale and drive key clients to accept the MMC as an alternative to traditional methods. This paper aims to unravel whether a phenomenon of “innovation negativism” has manifested and is contributing to public clients' indecision towards broader MMC, whether this is only linked to past negative experiences formed after the Second World War or whether additional contributing reasons exist to influence adoption.

This study focusses on exploring the decision-making of the UK public construction sector; therefore, this paper adopts a qualitative approach, utilising interviews with 14 carefully selected MMC experts, government advisors and public clients. The phenomenological stance adopted herewith enables the authors to make better sense of the perceptions of the interviewees, leading to the conceptualisation of the innovation negativism phenomenon.

The paper identifies nine themes that may be argued to promote a profound understanding of the MMC negativism influencing public clients' decision-making. The study has found that more than just the previous negative perceptions formulated post Second World War are driving innovation negativism in the UK public sector. Notably, the emerging themes are incomprehension, lacking evidence, communication, relationship history, bad experiences, uncertainty, inadequate experimentation, the business case and localism.

This study is the first construction management research that acts as a fair departure point to conceptualise the reasoning behind innovation negativism in the construction setting. Through mirroring demand's unipolarity for traditional methods, policy and decision-makers can now rely on the conceptualised reasoning to determine practical solutions to overcome clients' indecisions towards MMC.

In recent years, the robotic process automation (RPA) technology has increasingly been used to automate business processes. While a lot of research has been published on the potential and benefits of the technology, only a few studies have conducted research on challenges related to RPA adoption. Hence, this study aims to identify and discuss challenges related to RPA implementation projects.

Following an inductive methodology, interviews have been conducted with consultants who were involved in multiple RPA implementation projects. Hence, their extensive experience and views contribute to a detailed and in-depth understanding of the phenomena under research.

The results suggest that there are various process-related, technical, resource-related, psychological and coordinative challenges that must be considered when conducting an RPA implementation project.

This paper contributes to knowledge by presenting a new typology of challenges, as well as providing an in-depth discussion of the individual challenges that organizations face.

This study examines the public participation in the implementation of the Historic Urban Landscape (HUL), a United Nations Educational, Scientific and Cultural Organization (UNESCO) approach for urban development. HUL has six Critical Steps and four Tools Categories relating to community engagement, knowledge and planning, regulatory system and financial instruments. The HUL public participation component has materialized variably across the adopting cities, challenged by the local implementation capacity. In response, we have singled out two research questions revolving around the participants’ characteristics and participation methods.

This study instrumentalizes case studies as a research methodology and thematic literature as a theoretical context. The HUL projects for Ballarat, Australia and Cuenca, Ecuador have been selected as sources of published information because they exhibit comparative differences in completing community engagement. We have compared the community engagement accounts of the two cities.

The Ballarat and Cuenca HUL project accounts point out to commonalities and variances in responding to the HUL public participation mandate. The findings for the participants’ characteristics involve project setting, participants categories and participants empowerment; the findings for the participation methods involve initial preparation, domestic and international expertise and public conversation.

The results of the study help define public participation practices in HUL project implementations. The results present an opportunity for city officials, HUL project planners and field administrators for making informed decisions particularly in relation to the two public participation domains, the participants’ characteristics and the engagement methods.

Prefabricated building has been widely applied in the construction industry all over the world, which can significantly reduce labor consumption and improve construction efficiency compared with conventional approaches. During the construction of prefabricated buildings, the overall efficiency largely depends on the lifting sequence and path of each prefabricated component. To improve the efficiency and safety of the lifting process, this study proposes a framework for automatically optimizing the lifting path of prefabricated building components using building information modeling (BIM), improved 3D-A* and a physic-informed genetic algorithm (GA).

Firstly, the industry foundation class (IFC) schema for prefabricated buildings is established to enrich the semantic information of BIM. After extracting corresponding component attributes from BIM, the models of typical prefabricated components and their slings are simplified. Further, the slings and elements’ rotations are considered to build a safety bounding box. Secondly, an efficient 3D-A* is proposed for element path planning by integrating both safety factors and variable step size. Finally, an efficient GA is designed to obtain the optimal lifting sequence that satisfies physical constraints.

The proposed optimization framework is validated in a physics engine with a pilot project, which enables better understanding. The results show that the framework can intuitively and automatically generate the optimal lifting path for each type of prefabricated building component. Compared with traditional algorithms, the improved path planning algorithm significantly reduces the number of nodes computed by 91.48%, resulting in a notable decrease in search time by 75.68%.

In this study, a prefabricated component path planning framework based on the improved A* algorithm and GA is proposed for the first time. In addition, this study proposes a safety-bounding box that considers the effects of torsion and slinging of components during lifting. The semantic information of IFC for component lifting is enriched by taking into account lifting data such as binding positions, lifting methods, lifting angles and lifting offsets.