Search results

1 – 10 of 101
Open Access
Article
Publication date: 31 August 2023

Jingjing Shi, Ning Qian, Honghua Su, Ying Yang and Yiping Wang

The electrical properties of piezoelectric vibrators have a crucial influence on the operating state of ultrasonic motors. In order to solve the problem that the current…

Abstract

Purpose

The electrical properties of piezoelectric vibrators have a crucial influence on the operating state of ultrasonic motors. In order to solve the problem that the current piezoelectric vibrator generates a large amount of heat during vibration to degrade its performance, which in turn affects the normal operation of ultrasonic motors, this paper prepares a novel piezoelectric vibrator and tests its maximum vibration velocity under the working condition, which is more than twice as much as that of the current commercial PZT-8.

Design/methodology/approach

The crystal structures of the samples were analyzed by using an X-ray diffractometer. For microstructure observation, samples were observed by scanning electron microscope (SEM). The quasi-static piezoelectric coefficient meter (ZJ-3AN) was used for piezoelectric measurement. Dielectric properties were measured by utilizing an impedance analyzer (Agilent 4294A) with a laboratory heating unit. Ferroelectric hysteresis loops were obtained using a ferroelectric analyzer (Radiant, Multiferroic 100). A Doppler laser vibrometer (Polytec PSV-300F, Germany) and a power amplifier were used for piezoelectric vibration measurements, during which the temperature rise was determined by an infrared radiation thermometer (Victor 303, China).

Findings

The ceramics exhibit enhanced piezoelectric performance at 0.1–0.4 mol% of Yb doping contents. The ceramic of 0.4 mol% Yb reaches the maximal internal bias field and presents a larger mechanical quality factor of 1,692 compared with that of 0.2 mol% Yb-doped ceramic, in spite of a slightly decreased dielectric constant of 439 pC/N, the unit of the piezoelectric constant, which is the ratio of the local charge (pC) to the frontal force (N) and electromechanical coupling coefficient of 0.63. The vibrator with this large mechanical quality factor ceramic displays a vibration velocity of up to 0.81 m/s under the constraint of 20 °C temperature rising, which is much higher than commercial high-power piezoelectric ceramics PZT-8.

Originality/value

The enhanced high-power properties of the piezoelectric vibrator by Yb doping may provide a potential application for the high-performance USM and offer the possibility of long-term stable operation under high power for special equipment like USM. In the subsequent phase of research, the novel PZT-based high-power piezoelectric vibrator can be utilized in the USM, and the motor's performance will be evaluated under aerospace conditions to objectively assess the reliability of the piezoelectric vibrator.

Details

Journal of Intelligent Manufacturing and Special Equipment, vol. 4 no. 3
Type: Research Article
ISSN: 2633-6596

Keywords

Article
Publication date: 13 October 2023

Gabriela Maestri, Claudia Merlini, Leonardo Mejia and Fernanda Steffens

This study aims to develop two piezoelectric textile devices formed from different weft knitted fabric rapports (Jersey and Pique) to be applied in the renewable energy’s (RE…

Abstract

Purpose

This study aims to develop two piezoelectric textile devices formed from different weft knitted fabric rapports (Jersey and Pique) to be applied in the renewable energy’s (RE) area.

Design/methodology/approach

Two different weft knitted rapports were produced with polyester (PES). The device developed has five layers: a central of poly(vinylidene fluoride) (PVDF) nonwoven, involved by two insulating layers of PES knitted fabric; and two conductive external layers, made of polypyrrole-coated PES knitted fabric. The piezoelectric textile devices were joined by sewing the five layers of the device.

Findings

The FTIR technique confirmed the β-phase in the PVDF nonwoven. This study produced and tested two different textiles devices with piezoelectric behavior, confirmed by the correlated pattern of voltage and tensile stress difference curves, showing the potential application in RE’s and sustainable energies field as smart textiles, such as devices incorporated in garments in the areas of high movement (elbow, knee, foot, fingers and hands, among others), and as an energy generator device

Originality/value

Textile materials with piezoelectric properties promise to advance RE’s developments due to their high material flexibility and sensitivity to the electrical response. The knitted fabric technology presents flexibility due to its construction process. Comparative studies analyzing the electrical response between knitted and woven fabrics have already been realized. However, there is a gap in terms of research scientific research regarding the comparison of the piezoelectric effect in a material that presents different knitted fabric rapports.

Details

Research Journal of Textile and Apparel, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1560-6074

Keywords

Article
Publication date: 7 March 2023

Tian Rong and ChenXu Wang

Island attack and defense, emergency rescue, scientific research, civilian fisheries and other fields are inseparable from timely, high-quality underwater communications. However…

Abstract

Purpose

Island attack and defense, emergency rescue, scientific research, civilian fisheries and other fields are inseparable from timely, high-quality underwater communications. However light and other electromagnetic waves are severely attenuated in water, acoustic is currently the only energy carrier that can transmit signals over long distances in water. However, the complex water environment and serious interference bring serious challenges to underwater activities using underwater acoustic sensors-hydroacoustic transducers. Thus, this paper aims to develop a class of high reception sensitivity hydroacoustic transducer structures to provide research and utilization ideas for related scholars.

Design/methodology/approach

The electromechanical coupling coefficient is improved by converting the thickness vibration mode of the piezoelectric ceramic into the longitudinal vibration mode of the piezoelectric pillars array, and no polymer is added between the piezoelectric pillars array to reduce lateral coupling as well as internal friction, which can thus reduce the energy losses. Radial stacking in parallel can also enhance the charge generated through the positive piezoelectric effect. The optimal parameters of the structure are determined by equivalent circuit method and finite element analysis, and a hydroacoustic transducer of this structure is fabricated finally.

Findings

According to the standard test procedure, the hydroacoustic transducer was tested in water. The tests show that the conductance curve of the stacked high-sensitivity hydroacoustic transducer tested in the air is in good agreement with the simulation results. The resonant frequency is about 118 kHz, and the receiver sensitivity is −166 dB. The stacked material hydroacoustic transducer is in the high-frequency range and has a much higher sensitivity (−166 dB) than many types of hydroacoustic transducers fabricated by piezoelectric ceramic (less than −200 dB).

Research limitations/implications

Although the stacked high-sensitivity hydroacoustic transducer that the authors have fabricated has a performance improvement, it has a limitation. The hollow design of the pillar arrays increases the reception stress on each pillar, and the imposed pressure comes from water also increases simultaneously, so the depth of water that the stacked high-sensitivity hydroacoustic transducer can operate in may be slightly shallower than that made of a pure piezoelectric ceramic block or a piezoelectric ceramic material with polymer added. This will be a problem to be solved in a future deployment.

Practical implications

Whether it is marine scientific research or in various fields such as civil recreation and fishing, hydroacoustic communication and necessary underwater exploration are indispensable for acoustic waves. The hydroacoustic transducer is the sensor that sends and receives sound waves, so a lot of water equipment, such as yachts, sonar buoys, and so on, cannot be separated from the hydroacoustic transducer. In addition, the complexity of the water environment also requires a good performance of the hydroacoustic transducer to facilitate the convenience and effectiveness of subsequent signal processing. Therefore, hydroacoustic transducers have great market and commercial value.

Social implications

Hydroacoustic transducers are not only of great commercial value but also have a significant impact on the military as well as on people’s livelihood. As we all know, in the area of submarine communication and underwater exploration, sonar is the main force. The performance of the hydroacoustic transducer directly affects the performance of the hydroacoustic signal processing system, and ultimately directly determines the success or failure of the mission. In addition, the large-scale replacement of hydroacoustic transducers on equipment requires the concerted efforts of a large number of practitioners, such as material scientists, structural scientists, mathematicians and so on. Therefore, the rise of hydroacoustic transducers has given rise to a large number of learning positions as well as employment positions.

Originality/value

To enhance the reception sensitivity of the hydroacoustic transducer, the authors have optimized the existing hydroacoustic transducer materials and structures to propose a stacked sensitive element, which can effectively enhance the electromechanical conversion coefficient of the piezoelectric material. Furthermore, the authors have manufactured a hydroacoustic transducer using the proposed stacked sensitive element. The test results of the hydroacoustic transducer also show that the designed stacked sensitive element is of great help to enhance the reception sensitivity of the hydroacoustic transducer.

Details

Sensor Review, vol. 43 no. 2
Type: Research Article
ISSN: 0260-2288

Keywords

Article
Publication date: 26 April 2023

Yucheng Shi, Deren Kong and Xuejiao Ma

The purpose of this study is to clarify the mechanism of ambient and transient temperature effects on piezoelectric pressure sensors, and to propose corresponding compensation…

Abstract

Purpose

The purpose of this study is to clarify the mechanism of ambient and transient temperature effects on piezoelectric pressure sensors, and to propose corresponding compensation measures. The temperature of the explosion field has a significant influence on the piezoelectric sensor used to measure the shock wave pressure. For accurate shock wave pressure measurement, based on the actual piezoelectric pressure sensors used in the explosion field, the effects of ambient and transient temperatures on the sensor should be studied.

Design/methodology/approach

The compensation method of the ambient temperature is discussed according to the sensor size and material. The theoretical analysis method of the transient temperature is proposed. For the transient temperature conduction problem of the sensor, the finite element simulation method of structure-temperature coupling is used to solve the temperature distribution of the sensor and the change in the contact force on the quartz crystal surface under the step and triangle temperatures. The simulation results are highly consistent with the theory.

Findings

Based on the analysis results, a transient temperature control method is proposed, in which 0.5 mm thick lubricating silicone grease is applied to the sensor diaphragm, and 0.2 mm thick fiberglass cloth is wrapped around the sensor side. Simulation experiments are carried out to verify the feasibility of the control method, and the results show that the control method effectively suppresses the output of the thermal parasitic.

Originality/value

The above thermal protection methods can effectively improve the measurement accuracy of shock wave pressure and provide technical support for the evaluation of the power of explosion damage.

Details

Sensor Review, vol. 43 no. 3
Type: Research Article
ISSN: 0260-2288

Keywords

Article
Publication date: 3 October 2023

Mohammad Hadi Moradi and Mehdi Ranjbar-Roeintan

The purpose of this research is to extract the natural frequencies of a circular plate containing a central hole reinforced with boron nitride nanotubes (BNNTs) and containing…

Abstract

Purpose

The purpose of this research is to extract the natural frequencies of a circular plate containing a central hole reinforced with boron nitride nanotubes (BNNTs) and containing piezoelectric layers.

Design/methodology/approach

A unit cell shall be taken into account for the simulation of BNNT's volume fraction. A rectangular micromechanical model is used to obtain the mechanical properties of unit cell of piezoelectric fiber-reinforced composite (PFRC). The three-dimensional (3D) elasticity method is presented to provide the relationship between displacements and stresses. The one-dimensional differential quadrature method (1D-DQM) and the state-space methodology are combined to create the semi-analytical technique. The state-space approach is utilized to implement an analytical resolution in the thickness direction, and 1D-DQM is used to implement an approximation solution in the radial direction. The composite consists of a polyvinylidene fluoride (PVDF) matrix and BNNTs as reinforcement.

Findings

A study on the PFRC is carried, likewise, the coefficients of its properties are obtained using a micro-electromechanical model known as the rectangular model. To implement the DQM, the plate was radially divided into sample points, each with eight state variables. The boundary situation and DQM are used to discretize the state-space equations, and the top and bottom application surface conditions are used to determine the natural frequencies of the plate. The model's convergence is assessed. Additionally, the dimensionless frequency is compared to earlier works and ABAQUS simulation in order to validate the model. Finally, the effects of the thickness, lateral wavenumber, boundary conditions and BNNT volume fraction on the annular plate's free vibration are investigated. The important achievements are that increasing the volume fraction of BNNTs increases the natural frequency.

Originality/value

The micromechanical “XY rectangle” model in PFRC along with the three-dimensional elasticity model is used in this literature to assess how the piezoelectric capabilities of BNNTs affect the free vibration of polymer-based composite annular plates under various boundary conditions.

Details

International Journal of Structural Integrity, vol. 14 no. 6
Type: Research Article
ISSN: 1757-9864

Keywords

Article
Publication date: 14 August 2023

Sajjad Habashi Youvalari, Arash Olianezhad and Saeid Afrang

The purpose of this paper is to design and simulate a piezoelectric micropump using microelectromechanical systems technology for drug delivery applications.

Abstract

Purpose

The purpose of this paper is to design and simulate a piezoelectric micropump using microelectromechanical systems technology for drug delivery applications.

Design/methodology/approach

Two piezoelectric actuators are used to actuate and bend the diaphragms in the proposed structure. In this micropump, the liquid flow is rectified by two silicon check valves.

Findings

The use of two piezoelectric transducer (PZT) actuators in the parallel mod not only reduces dead volume but also increases stroke volume as well. In addition to increasing the flow rate, this phenomenon enhances the operation of the micropump to have self-priming as smoothly as possible.

Originality/value

This actuating method results in a 22% increase in flow rate and compression ratio, as well as a 15% reduction in function voltage. The fluid-solid interaction is simulated using COMSOL Multiphysics 5.3a.

Details

Sensor Review, vol. 43 no. 5/6
Type: Research Article
ISSN: 0260-2288

Keywords

Article
Publication date: 13 September 2021

Jitendra B. Zalke, Sandeepkumar R. Pandey, Ruchir V. Nandanwar, Atharva Sandeep Pande and Pravin Balu Nikam

The purpose of this research paper is to explore the possibility to enhance the power transfer from piezoelectric energy harvester (PEH) source to the load. As the proposed…

Abstract

Purpose

The purpose of this research paper is to explore the possibility to enhance the power transfer from piezoelectric energy harvester (PEH) source to the load. As the proposed gyrator-induced voltage flip technique (GIVFT) does not require bulky components such as physical inductors, it is easily realizable in small integrated circuits (IC) package thereby offering performance benefits, reducing area overhead and providing cost benefits for constrained self-powered autonomous Internet-of-Things (IoT) applications.

Design/methodology/approach

This paper presents an inductorless interface circuit for PEH. The proposed technique is called GIVFT and is demonstrated using active elements. The authors use gyrator to induce voltage flip at the output side of PEH to enhance the charge extraction from PEH. The proposed technique uses the current-voltage (I-V) relationship of gyrator to get appropriate phasor response necessary to induce the voltage flip at the output of PEH to gain power transfer enhancement at the load.

Findings

The experimental results show the efficacy of the GIVFT realization for enhanced power extraction. The authors have compared their proposed design with popular earlier reported interface circuits. Experimentally measured performance improvement is 1.86×higher than the baseline comparison of full-wave bridge rectifier circuit. The authors demonstrated a voltage flip using GIVFT to gain power transfer improvement in piezoelectric energy harvesting.

Originality/value

To the best of the authors’ knowledge, pertaining to the field of PEH, this is the first reported GIVFT based on the I-V relationship of the gyrator. The proposed approach could be useful for constrained self-powered autonomous IoT applications, and it could be of importance in guiding the design of new interface circuits for PEH.

Details

Circuit World, vol. 49 no. 2
Type: Research Article
ISSN: 0305-6120

Keywords

Article
Publication date: 11 March 2024

Vipin Gupta, Barak M.S. and Soumik Das

This paper addresses a significant research gap in the study of Rayleigh surface wave propagation within a piezoelectric medium characterized by piezoelectric properties, thermal…

Abstract

Purpose

This paper addresses a significant research gap in the study of Rayleigh surface wave propagation within a piezoelectric medium characterized by piezoelectric properties, thermal effects and voids. Previous research has often overlooked the crucial aspects related to voids. This study aims to provide analytical solutions for Rayleigh waves propagating through a medium consisting of a nonlocal piezo-thermo-elastic material with voids under the Moore–Gibson–Thompson thermo-elasticity theory with memory dependencies.

Design/methodology/approach

The analytical solutions are derived using a wave-mode method, and roots are computed from the characteristic equation using the Durand–Kerner method. These roots are then filtered based on the decay condition of surface waves. The analysis pertains to a medium subjected to stress-free and isothermal boundary conditions.

Findings

Computational simulations are performed to determine the attenuation coefficient and phase velocity of Rayleigh waves. This investigation goes beyond mere calculations and examines particle motion to gain deeper insights into Rayleigh wave propagation. Furthermore, this investigates how kernel function and nonlocal parameters influence these wave phenomena.

Research limitations/implications

The results of this study reveal several unique cases that significantly contribute to the understanding of Rayleigh wave propagation within this intricate material system, particularly in the presence of voids.

Practical implications

This investigation provides valuable insights into the synergistic dynamics among piezoelectric constituents, void structures and Rayleigh wave propagation, enabling advancements in sensor technology, augmented energy harvesting methodologies and pioneering seismic monitoring approaches.

Originality/value

This study formulates a novel governing equation for a nonlocal piezo-thermo-elastic medium with voids, highlighting the significance of Rayleigh waves and investigating the impact of memory.

Details

International Journal of Numerical Methods for Heat & Fluid Flow, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0961-5539

Keywords

Article
Publication date: 2 May 2023

Huan Liu, Rui Wang, Junyao Wang, Xingyu Chen, Yunpeng Li, Bowen Cui, Tianhong Lang and Weihua Zhu

Flexible pressure sensor arrays have promising applications in analog haptics, reconfiguration of sensory functions, artificial intelligence, wearable devices and human-computer…

Abstract

Purpose

Flexible pressure sensor arrays have promising applications in analog haptics, reconfiguration of sensory functions, artificial intelligence, wearable devices and human-computer interaction. The force disturbance generated by the connecting material between the sensor array units will reduce the detection accuracy of the unit. The purpose of this paper is to propose a flexible pressure sensor with interference immunity capability. A C-type bridge flexible piezoelectric structure is used to improve the pressure perturbation. The interference immunity capability of the sensor has been improved.

Design/methodology/approach

In this paper, a C-type pressure sensor array structure by rapid injection moulding is manufactured through the positive piezoelectric effect of a piezoelectric material. The feasibility of C-type interference immunity structure in a flexible sensor array is verified by further analysis and experiment. A flexible pressure sensor array with C-type interference immunity structure has been proposed.

Findings

In this paper, we present the results of the perturbation experiment results of the C-type pressure sensor array, showing that the perturbation error is less than 8%. The test of the flexible sensor array show that the sensor can identify the curved angle of up to 120 °, and the output sensitivity of the sensor in the horizontal state reaches 0.12 V/N, and the sensor can withstand the pressure of 80 N. The flexible sensor can work stably in the stretch rate range of 0–8.6% and the stretch length range of 0–6 mm.

Originality/value

In this paper, C-type pressure sensor array structure is fabricated by rapid injection moulding for the first time. The research in this paper can effectively reduce the disturbance of input pressure on the sensor’s internal array and improve the output accuracy. The sensor can intuitively reflect the number of fingers sliding on the sensor by the order in which the maximum voltage appears. Due to the strong interference immunity capability and flexibility of the flexible sensor array mechanism, it has a broad application prospect in the practical fields of haptic simulation, perceptual function reconstruction, artificial intelligence, wearable devices and human–computer interaction.

Article
Publication date: 12 August 2021

Guoda Wang, Ping Li, Yumei Wen and Zhichun Luo

Existing control circuits for piezoelectric energy harvesting (PEH) suffers from long startup time or high power consumption. This paper aims to design an ultra-low power control…

Abstract

Purpose

Existing control circuits for piezoelectric energy harvesting (PEH) suffers from long startup time or high power consumption. This paper aims to design an ultra-low power control circuit that can harvest weak ambient vibrational energy on the order of several microwatts to power heavy loads such as wireless sensors.

Design/methodology/approach

A self-powered control circuit is proposed, functioning for very brief periods at the maximum power point, resulting in a low duty cycle. The circuit can start to function at low input power thresholds and can promptly achieve optimal operating conditions when cold-starting. The circuit is designed to be able to operate without stable DC power supply and powered by the piezoelectric transducers.

Findings

When using the series-synchronized switch harvesting on inductor circuit with a large 1 mF energy storage capacitor, the proposed circuit can perform 322% better than the standard energy harvesting circuit in terms of energy harvested. This control circuit can also achieve an ultra-low consumption of 0.3 µW, as well as capable of cold-starting with input power as low as 5.78 µW.

Originality/value

The intermittent control strategy proposed in this paper can drastically reduce power consumption of the control circuit. Without dedicated cold-start modules and DC auxiliary supply, the circuit can achieve optimal efficiency within one input cycle, if the input signal is larger than voltage threshold. The proposed control strategy is especially favorable for harvesting energy from natural vibrations and can be a promising solution for other PEH circuits as well.

Details

Circuit World, vol. 49 no. 2
Type: Research Article
ISSN: 0305-6120

Keywords

1 – 10 of 101